afterheat

n.  余热,后热(核反应堆所产生的残热)

电力



双语例句

  1. Fourth generation reactors have better ways of dealing with "afterheat," heat created by leftover radioactivity in a reactor, and could circumvent the problem completely.
    第四代核反应堆采用更为先进的方法处理“残热”,且能彻底绕开此问题。残热产生自反应堆中残余的放射能。
  2. A1-D flow discharge model for coolant blow-down and1-D heat transfer model for afterheat removal aiming at TBM LOCA analysis are developed.
    并为中国氦冷固体增殖实验包层模块冷却剂丧失事故(LOCA)分析开发了一维喷放和余热排除计算模型。
  3. In view of the worse indoor air quality in heating classroom, we suggest to introduce positive air exchange facilities with function of recycling afterheat.
    针对目前采暖教室室内空气质量比较差的状况,建议采用有余热回收功能的主动换气设施。
  4. Combined heat and power plant Associated heating system and its economics of solar energy and boiler afterheat
    太阳能和锅炉烟气余热联合的供热系统及其经济性
  5. Research and Application of Afterheat Utilization Technology on Alumina Chamotte Kiln
    氧化铝熟料窑余热利用技术研究及其应用
  6. You body's afterheat, rapid palpitation, not tranquil lips.
    你身体的余热,急促的心跳,不平静的吻。
  7. Discussion of Making use of Generating Set Exhaust or the Afterheat Carries Out Heat Addition and Provides Cold
    利用发电机组排气或余热进行供热及供冷的探讨
  8. On the Afterheat Resource Utilization Project of Hebi Coal ( Group) Company
    鹤煤(集团)公司余热资源综合利用研究
  9. Study of afterheat reclamation for continuous blowdown drain system of utility boiler
    电站锅炉连扩余热回收系统的研究
  10. Successful Application of Afterheat Reproduction Compressed Air Drier
    微加热(余热)再生式压缩空气干燥器的成功应用
  11. Choosing the reasonable burners integrated with air preheater the theoretic burning temperature of the fuel is raised, that is not only satisfying the technical requirements but also recovering afterheat and saving fuel.
    选择合理的燃烧装置,结合预热助燃空气的办法,提高了燃料的理论燃烧温度,满足工艺的要求,同时也回收了热量,节约了燃料。
  12. The simulation results for robust adaptive feedforward control of an intermittent afterheat furance is also given in this paper.
    本文还给出了采用所提出的控制器控制某钢厂间歇式余热锅炉的仿真结果。
  13. The energy driving the heatpump comes from the solar energy, burning heat of the gas and the afterheat of the compressor etc.
    设计驱动热泵的热量来源于太阳能、燃气加热、压缩机出口余热及部分地热热能。
  14. Application of Incorporation in Pipe Network Technology of Converter Afterheat Steam and Boiler Overheat Steam
    转炉余热蒸汽与锅炉过热蒸汽并网技术的应用
  15. Epitome of Freshening by Ships 'Afterheat& Abstract of Multi-effect Distillation Fresh-water Device's Operation Principle
    船舶余热海水淡化浅谈&多效蒸发淡水装置的工作原理概述
  16. The Application of the Pulse Soot Blower on the Afterheat Boiler on the Catalytic Cracking Installment
    脉冲吹灰器在催化裂化装置余热锅炉上的应用
  17. Waste Steam Amount from Silicon Removing Machines and Discussion on Utilization of Afterheat
    脱硅机乏汽量及其余热利用的探讨压水堆蒸汽式稳压器
  18. The energy saving work practice of utilizing afterheat of drained effluent of boilers is presented.
    介绍了锅炉排污余热利用节能工作的实践。
  19. This paper analyses the influence of air preheated by afterheat on fuel utilization and energy-saving, appraises the feasibility and economy of preheating air by heat exchangers on the muffle furnaces for enameling.
    本文就利用余热预热空气,对炉子燃料利用率和节能的影响进行分析,同时对马弗搪烧炉上利用换热器预热空气的可行性和经济性进行了评估。
  20. The Application of Afterheat Recovery System for Exhaust Gas of Power Boiler in Tongliao General Power Plant
    电站锅炉排烟余热回收系统在通辽发电总厂的应用
  21. The technological transformations and benefit analysis of the Afterheat Boiler on the Catalytic Cracking Installment
    催化裂化装置余热锅炉技术改造及效益分析
  22. Analysis and Treatment of Vibration Faults of Afterheat Generation Device of Blast Furnace Gas
    高炉煤气余压发电装置振动故障分析及处理
  23. The present and prospect of the afterheat utilization in our industrial furnace
    我国工业炉余热利用的现状与展望
  24. Application of afterheat hardening tech. in mining connecting circle production
    余热淬火工艺在矿用连接环生产中的应用
  25. Using heat exchanger to reclaim the afterheat of the industrial kiln fume can not only save fuel consumption but also improve the productivity of kilns.
    用换热器回收工业炉窑的烟气余热,既可节约燃耗,又可提高炉窑产量。
  26. Design and Practice of Using Converter Afterheat Steam as Steam Source for Vacuum Treatment in Steelmaking
    采用转炉余热蒸汽作为真空处理汽源的设计与实践
  27. The main specific performance is the massive hot working device thermal efficiency is comparatively low, much industry valuable afterheat wasted.
    具体主要表现为,大量的热工设备热效率相对较低,许多价值极高的各种工业余热被白白浪费。
  28. Compound heating system is use of the afterheat of the engine and heater to provide heat for the bus. Compound heating system could make bus engine start more easily, reduce start exhaust and mechanical friction, save energy sources.
    复合采暖系统是利用发动机余热和加热器共同为客车提供热量,复合采暖系统可以使客车发动机更易启动,降低启动废气排放,并且可以减少机件间的摩擦,节省能源。
  29. CHP ( Combined Heat and Power Generation) is that steam impetus gas turbine to generate electricity which produces using the boiler and undertakes the industrial used gas load, and the afterheat undertakes the heating load.
    热电联产是利用锅炉产生的蒸汽推动气轮机发电,并承担工业用气负荷,余热承担供热负荷。