winder

noun

1. 缠绕器；卷簧器；卷线机
   a device or piece of machinery that winds sth, for example sth that winds a watch or the film in a camera

1. Furthermore, provision must be made to stop the spool if, for any reason, the winder stops.
   另外在任何情况下，如果络纱机停车，应采取措施使筒子停止回转。
2. It is difficult to control the winder of heat setting machine if the tapered tension control is needed.
   热定型机末道收卷如果有张力锥度控制的要求，一般解决办法比较困难。
3. In fibre manufacture of chemical plants, it requires good quality to the high-speed winder.
   化纤生产中，高速卷绕头控制的关键是提高卷绕速度控制的精度。
4. Analysing on the main factors affecting the riding comfort of hydraulic winder
   影响液压提升机乘坐舒适性的主要因素分析
5. Application of the feedforward control method in winder velocity modulation system
   前馈控制在复卷机调速系统中的应用
6. RHW-63 general-purpose NC loop wire winder is one of the most advanced loop winding devices in China and is preferred in the transformer production industry.
   RHW-63通用型数控环形绕线机是国内最先进的环形绕线设备之一，为互感器生产行业之首选。
7. Research on Reducing Ramie Yarn Hairiness on the Winder Using Nozzle
   利用喷嘴在络筒机上减少苎麻纱毛羽的研究
8. Place bobbin winder 3 in the belt cover, and position it so that it does not contact the machine arm or the belt cover before fixing it with wooden screws.
   把绕线装置3放到皮带护罩里，调整到不接触机架和皮带护罩的位置，然后用木螺丝进行固定。
9. Quality Controlling and Utilization Maintaining of JZ-style Sinking Winder automatic rotation stopper
   JZ型凿井绞车生产质量控制与使用维护自动旋转伸缩式凿岩机
10. The document will discuss the solution and experience of Danfoss center winder option card used in stress-relieving control.
    本文介绍了用丹佛斯变频器和中心卷绕卡实现带张力锥度控制要求的中心卷绕的办法和经验。
11. The Reason Analysis and Eliminate Method Discuss to Strain Imba-lance of Multirope Friction Winder Steel Wire Rope
    多绳摩擦提升机钢丝绳张力不平衡原因分析及消除方法
12. Study of Mechanical Model and Tension Control Strategy of Soft and Wide Sheet in New Surface Winder
    摩擦收卷中柔幅材料力学建模及张力控制策略研究
13. In this paper, the experimental research on vibration is made in the light of a living example of tower-type multi-rope friction winder.
    根据塔式多绳摩擦提升机的运行特点，分析了振动原因，建立了振动故障源的模糊综合评判模型。
14. Danfoss's motion control card has high precision control ability, add the software developed by Danfoss specially for center winder, it can been used in these application.
    丹佛斯的运动控制卡有很高精度的控制能力，加上丹佛斯专为卷绕行业开发的中心卷绕程序，能很好地解决这个问题。
15. Based on the introduction of technical process and criteria for an automatic double-fly-fork winder ( ADW), the hardware and software of control system are designed in this paper.
    本文在介绍全自动双飞叉嵌线式转子绕线机工艺流程和技术指标的基础上，设计了绕线机的控制系统硬件结构和控制系统软件程序。
16. Analysis of Rope Tension at Skip Suspension of Friction Winder
    多绳提升箕斗悬挂点钢丝绳张力变化规律分析
17. The Design of SCM Control System for Winder
    绕线机单片机控制系统的设计与开发
18. Disposition system research of doubling winder product driven by customer demands
    客户需求驱动的并纱机产品配置系统研究
19. Small Intelligent Winder Based on Electronic Braking Mode without Gear
    基于电子刹车模式的无齿轮装置智能小型绕线机
20. The boiler used by such locomotive was the one removed from a small winder, the wheel being bought as the waste cast iron, and the body framework was made from U-shape iron.
    它用的锅炉是从一个小型卷扬机上拆下来的，车轮是当铸铁废料买来的，车身支架是用U型铁制造的。
21. This paper has adopted the feedforward control method which is based on the winding control so as to improve the winder's controlling performance of acceleration or deceleration.
    在卷取控制的基础上应用前馈控制补偿的方法，以此来改善复卷机在加减速时的控制性能。
22. Application of Finite Element Method to Design of a Winder Main Axle Installment
    有限元法在提升机主轴装置设计中的应用
23. The utility model in particular relates to a winder which is used to wind in a plastic film production process.
    本实用新型特指一种塑料薄膜生产工艺中用于收卷的收卷装置。
24. Hydraulic center-shaft winder When swinging transmission machine operation, the force constant rotation axis to make efforts before and axial rotation move backward.
    当摇摆传动机械运行时，等速旋转入力轴使出力轴向前和向后旋动。
25. Also, upon start-up, higher tension are developed because the winder must overcome spool inertia.
    另外，在络纱机启动时，由于需要克服筒子的惯性，会产生较大的纱线张力。
26. Analysis and Research on Key Mechanism of New-Style Automatic Winder
    新型自动络筒机关键机构的分析与研究
27. Electron control semi-automatic winder
    电子控制半自动绕线机
28. The Application of IPC in the Winder Monitor Control System
    工控机在纸厂复卷机监控系统中的应用
29. Application of Aluminum Alloy High-speed Cutting Technology Used in the Processing of Parts of Automatic Cone Winder
    铝合金高速切削技术在自动络筒机零件加工中的应用
30. Research and Development on Sensor for Wire-rope Dynamic Tension of Multiple-rope Winder;
    对矿井多绳摩擦提升过程的钢丝绳张力及动张力的变化进行了研究。

noun

1. mechanical device around which something can be wound

2. mechanical device used to wind another device that is driven by a spring (as a clock)

   Synonym:    key

3. a worker who winds (e.g., a winch or clock or other mechanism)