CFD

abbr.  载频拨号(Carrier Frequency Dialing); 集装箱舰队师(Container Fleet Division); 累积频率分布(Cumulative Frequency Distribution)

计算机



双语例句

  1. The CFD method is used to study the airflow pattern and cross-contamination in a photo resistance research lab.
    我们采用CFD技术对光刻胶研发实验室内的气流组织和微尘污染进行了研究。
  2. It is also introduced the fundamental theory of CFD technology.
    同时简单的介绍了CFD技术的基本理论。
  3. CFD has been applied widely in the design and retrofit of all kinds of boilers.
    计算流体力学正大量应用于各类锅炉的设计和改造。
  4. The liquid-solid conjugate heat transfer in a narrow rectangular channel was numerical analyzed by using CFD code CFX.
    本文采用CFD软件CFX对矩形窄缝通道内流固共轭传热进行了数值分析。
  5. This topic used CFD simulation technology for numerical simulation of the full port and performance prediction.
    本课题运用CFD数值模拟技术对潜水泵全流道进行数值模拟与性能预测。
  6. CFD numerical simulation; high speed train; air distribution; comfortableness;
    CFD数值模拟;高速列车;气流组织;舒适性;
  7. Study of A New Mass Transfer Model of CFD and Its Application on Distillation Tray
    流体力学传质计算新模型的研究和在塔板上的应用
  8. A method using CFD technology is used for accurate prediction of aerodynamic force and heat of air-breathing hypersonic vehicles.
    对吸气式高超声速飞行器而言,物面热流和摩阻的准确预测对飞行器设计及安全十分关键。
  9. The CFX10.0 is one kind of CFD commercial software, used to simulate vapor-liquid two-phase medium.
    运用CFD商业软件CFX10.0对带纵向涡发生器的窄间隙矩形通道内的汽液两相介质进行了模拟计算。
  10. Airfoil design of a micro-flapping wing based on CFD
    基于CFD方法对微型扑翼翼型设计的研究
  11. Research on Airflow and Air Temperature Simulation in the Piggery Based on CFD
    基于CFD的猪舍内气流场和温度场模拟研究
  12. Simulation of transient state of hydraulic pulsation dampers with a CFD code was done to get their frequency response.
    对液压脉动衰减器用CFD软件进行了数值仿真计算,得到了其频率响应。
  13. This paper describes the Computational Fluid Dynamics ( CFD) and CFX software, as well as discusser it's special modules, mathematical models and successful application areas.
    本文介绍了计算流体力学(CFD)以及CFX应用软件的特有模块、包含的数学模型和成功应用领域。
  14. Effect of different three-dimensional model on the result of CFD
    三维模型的差异对CFD计算结果影响的研究
  15. The good agreement indicates that CFD modeling can be used in the complex fluidized beds coal gasification processes.
    试验结果和模拟的计算结果进行了对比,验证的结果表明了此CFD模型可以用来预测煤气化的反应过程。
  16. CFD Simulation and Experimental Study on the Aerodynamic Characteristics of a F1 Racing Car
    F1赛车气动特性的CFD仿真和试验研究
  17. Thermal-regulation model of human body, Automotive air conditioning; CFD; Temperature field; Numerical simulation;
    人体热力模型;汽车空调;计算流体动力学;温度场;数值模拟;
  18. The numerical simulation of compressible multi-material fluids has become an increasing important aspect in CFD.
    多介质流体运动界面问题的数值模拟已经成为计算流体力学研究领域的重要研究课题之一。
  19. The CFD simulation is carry through to this novel type of ventilation.
    本文对这种新型送风方式进行了CFD模拟计算。
  20. Applies stratified air conditioning to this building for its features, which is verified by the CFD simulation results.
    设计时结合建筑特点,采用了分层空调的送风方式,CFD模拟表明空调通风系统的设计可以满足使用要求。
  21. Comparison between strength analysis of wind turbine blades based on CFD and BEM
    基于CFD和BEM方法的风电叶片强度分析比较
  22. Calculation and Analysis of Propeller Performance by CFD
    基于CFD方法的螺旋桨性能计算与分析
  23. The numerical model and software platform for optimization based on computational fluid dynamics ( CFD) are also discussed.
    基于计算流体动力学(CFD)原理的电池仿真和优化过程及基本数学模型和软件平台。
  24. The CFD technique and PIV were adopted to investigate the flow field and concentration distribution in Stirred Vessel with double-flat agitator.
    利用CFD技术和PIV测量研究了搅拌器内双层桨叶不同位置的流场和浓度分布。
  25. This area of study is called Computational Fluid Dynamics or CFD.
    这方面的研究是所谓的计算流体动力学或计算流体力学。
  26. Analyze temperature field and velocity field of guest room by making use of CFD technique and experiment associative mode.
    利用CFD技术与实验相结合的方式对客房空调气流的温度场和速度场进行了分析。
  27. A polyphase flow numerical analog analysis has been made of the high pressure jet flow field, by way of CFD.
    利用计算流体动力学(FD)方法对高压水射流流场进行了多相流的数值模拟分析。
  28. Three dimensional field of a variable geometry linear turbine cascade is simulated by CFD software NUMECA.
    使用CFD软件NUMECA对变几何平面叶栅三维流场进行了数值模拟。
  29. The circuit system of deep-hole drilling is simulated using general purpose Computational Fluid Dynamics ( CFD) code FLUENT.
    采用通用计算流体力学软件FLUENT对深孔钻削中油路系统进行力学仿真。
  30. Combining experimental solution and CFD analyses, a method to appraise noise of poppet valve was studied.
    结合试验结果和计算流体动力学的解析结果,研究液压锥阀的噪声评价方法。