ECAP
英
美
abbr. 电子电路分析程序(Electronic Circuit Analysis Program); 电子战斗行动计划(Electronic Combat Action Plan); 俯仰电子控制装置(Electronic Control Assembly-Pitch)
双语例句
- Equal channel angular pressing process ( ECAP) of pure Al(ⅰ)& microstructure evolution
纯铝等径角挤技术（Ⅰ）&显微组织演化 - ECAP deformation is new approach for fabricating high performance magnetic materials with high material utilization and low production cost.
ECAP变形为制备利用率高、成本低的高性能磁性材料提供了一种新途径。 - The Study on 3-D Finite Element Simulation and Experiment Method for ECAP
等径通道挤压三维有限元模拟及试验方法研究 - Strain-induced martensitic transformation in 304L Austenitic Stainless Steel under ECAP deformation
ECAP变形下304L奥氏体不锈钢的形变诱导马氏体相变 - Approaches to present status of the ultra-fine grain materials processed by ECAP were performed and some further research issues were proposed.
论述了由等径角挤压方法制备超细晶材料的发展现状并提出了一些需要进一步深入研究的方面。 - FEA of optimized design for ECAP die
ECAP模具优化设计的有限元分析 - Effect of Equal Channel Angle Pressing ( ECAP) Technology on Microhardness of Ti-1023 Alloy
等通道转角挤压（ECAP）工艺对Ti-1023合金显微硬度的影响 - The equivalent strain pattern and deformation uniformity of strain behavior of pure copper in case of ECAP
ECAP条件下纯铜应变行为的等效应变规律及变形均匀性 - Study on Microstructure and Mechanical Properties of Mg_2Si Reinforced Mg-Zn-based Composite Deformed by ECAP
等通道转角挤压Mg2Si增强镁锌基复合材料的显微组织和力学性能研究 - Study on ECAP for ultra-fine alloy
等通道转角挤压工艺制备超细化合金的研究与进展 - At the same time, the texture of as-rolled magnesium alloy was reduced gradually and started to change to ECAPed texture when the texture intensity rose with the increase of ECAP passes.
同时经ECAP变形后，原始轧制织构随变形道次的增加不断减小，并开始转变为ECAP织构，织构强度不断增强； - Deformation Behavior of Al-Ti-B Master Alloy during ECAP Process
铝-钛-硼中间合金在等径角挤压过程中的变形行为 - Influence of ECAP Routes on the Microstructure and Properties of CP-Ti at Room Temperature
变形方式对工业纯钛室温ECAP组织及性能影响 - Severe plastic deforming behavior and microstructure evolution of two phases in medium-carbon steel during equal channel angular pressing ( ECAP) were investigated by experimental method.
用实验方法研究了中碳钢两相组织在等通道角挤压过程中的强烈塑性变形行为和组织演化过程。 - It is shown that the mechanical properties of annealed sample of 2224 aluminum alloy are improved by the combination of solid solution and aging treatment after ECAP, the size of grain is refined.
结果表明，退火态2224铝合金经ECAP挤压后，进行固溶和时效处理，明显提高了合金的力学性能，细化了合金的晶粒。 - XRD data indicate that this ECAP processing causes the XRD peaks to broaden.
XRD数据显示ECAP加工增加了织构并使衍射峰变宽。 - ECAP decreases the yield strength of recrystallized steel.
超大塑性变形（ECAP）会降低奥氏体不锈钢完全再结晶后的屈服强度。 - This paper studies pure copper's deformation behavior of the ECAP-Conform.
本文研究了纯铜在连续等径角挤压变形过程中的变形行为。 - This paper discusses the purposes and significance of research of ECAP, the principle of ECAP, its progress in research and its five problems urgent to be solved.
本文阐述了ECAP的研究目的与意义，说明了ECAP的原理，探讨了ECAP的国内外研究现状及进展，指出了ECAP急待解决的五大问题，具有较好的实用价值。 - Research of ECAP and Controlling of Material Microstructure and Property
ECAP工艺与材料组织性能控制的研究 - Under the present ECAP conditions, the cementite in the lamellar pearlite exhibited the considerable plastic deformation capability.
在本试验条件下，珠光体组织中的片状渗碳体表现出很强的塑性变形能力。 - Simulation and Analysis of ECAP Method for Grain Refinement
ECAP细化晶粒法的仿真与分析 - Case study of ECAP rules of arithmetic logics and component types used to logging formation evaluation are made.
给出了测井储层评价算法逻辑的ECAP规则表示事例和测井储层评价的组件类别划分，以及基于ECAP规则的分层应用程序的运行机制描述。 - The microstructure evolution of pure aluminum in different equal channel angular pressing ( ECAP) routes was investigated.
研究了纯铝在3种（A、B和C）不同等径角挤工艺中的显微组织演化。 - Stress distribution during the ECAP process was researched using polycrystalline plasticity model, in which stress in material element was average effect of a certain amount of anisotropic grain.
通过多晶塑性模型分析了ECAP过程中应力分布特征，计算显示了材料单元的应力是一定数量各向异性晶粒作用平均化的结果。 - ECAP ( equal-channel angular pressing) and correlated large-deformation technology is a promising method for industrial application.
其中，等通道转角挤压（equal-channelangularpressing，简称ECAP）及相关大应变技术极具工业化应用前景。 - At the same time, the use of optical microscope, scanning electron microscopy, X-ray diffraction and EDS spectrometer observes changes in alloy microstructure during the process of ECAP deformation and Aging precipitation, and also determine the type of precipitates and tensile fracture mechanism.
同时，利用金相显微镜、扫描电镜、X射线衍射仪和EDS能谱仪观察了ECAP变形及时效过程中合金显微组织的变化，确定了析出相的种类和拉伸断裂机制等。 - ECAP process is investigated by using numerical simulations and experimental studies in this paper.
本文通过数值模拟分析与实验研究相结合的方法开展对ECAP工艺的研究。 - This paper systematically studied the deformation process, strain mechanism, texture characteristic and mechanical property of polycrystalline pure copper and directional solidification pure copper during ECAP.
本文系统的研究了多晶纯铜和定向凝固纯铜在ECAP中的变形过程、应变机理、织构特征和力学性能。 - The results show that ECAP deformation has a stable texture when shearing deformation is continuously increasing.
结果证明当剪切变形量不断增加时ECAP变形存在一个稳定织构。