SEbS

网络  苯乙烯嵌段共聚物; 弹性体; 苯乙烯; 热塑性弹性体

网络



双语例句

  1. Study on Thermal Kinetics for Chemical Crosslinking of SEBS
    SEBS化学交联的热分析动力学研究
  2. Tribological Properties of Thermoplastic Elastomers SEBS/ Talc Blends
    SEBS热塑性弹性体/滑石粉共混物的摩擦磨损性能研究
  3. Study on the Performance of SEBS/ PP Thermoplastic Elastomer and Its Preparation
    SEBS/PP热塑性弹性体的制备与性能研究
  4. Preparation and Characterization of Monomer Casting Nylon 6 and Its Composition with SEBS Elastomer
    MC尼龙6与SEBS弹性体复合材料的制备与表征
  5. Objective: To observe immune regulation function of selenium-enriched barley seedling ( SEBS) in mice by detecting cell-mediated immunity and humoral immunity.
    目的:通过测定小鼠细胞免疫与体液免疫,来研究富硒大麦苗对小鼠免疫功能的调节作用。
  6. The mechanical property of composite of oil-extended SEBS with filler compound was studied via melt extrusion.
    采用熔融共混方法研究了碳酸钙填充充油SEBS复合材料的力学性能的影响。
  7. Study of factors influencing on MAH modified SEBS performance
    MAH改性SEBS性能影响因素探讨
  8. Study on Tribological and Mechanical Properties of Oil-extended SEBS Blends Modified by Fillers
    填料改性充油SEBS/PP共混材料的摩擦学和力学性能研究
  9. EVA/ SEBS Blends Foaming Technology
    EVA/SEBS共混材料的发泡技术
  10. Studies on Damping and Sound Insulation Properties of TPU/ SEBS Microlayered Composites
    交替多层TPU/SEBS复合材料阻尼隔声性能的研究
  11. Effects of Al ( OH)_3 on the Properties of SEBS/ PP/ OMMT Composites
    Al(OH)3对SEBS/PP/OMMT插层复合体系性能的影响
  12. Research of High Frequency Induction Heating Power Supply for Preheats of the Cross-linked Polyethylene Copper Core Cable; Study on Thermal Kinetics for Chemical Crosslinking of SEBS
    交联电缆铜导体预热感应加热电源的研究SEBS化学交联的热分析动力学研究
  13. SEBS Melt Grafted by Maleic Anhydride and its Effect on the Properties of Polyphenylene Oxide ( PPO)/ Nylon-6 Alloy
    马来酸酐(MAH)接枝SEBS及其对PPO/PA6合金性能的影响
  14. Relating to or concerned with the morphology of plants and animals. Study on Thermal Kinetics for Chemical Crosslinking of SEBS
    关于或与植物和动物形态学有关联的。SEBS化学交联的热分析动力学研究
  15. Effect of High Shearing Stress During Melt Extruding on the Mechanical Properties of PS/ SEBS/ CaCO_3 Blends
    高剪切应力对PS/SEBS/CaCO3材料力学性能影响
  16. The effect of the mixing rotor on the homogenizing blend SEBS with PP was proved by the characterization of the structure and the mechanical properties.
    通过力学性能与结构表征,证明了密炼转子模块对SEBS与PP均匀共混加工的作用。
  17. The effect of maleated SEBS on the morphology and properties of nylon 1212/ nylon 6 Blends
    马来酸酐化SEBS对尼龙1212/尼龙6共混体系形态和性能的影响
  18. The mechanical properties of SEBS product with microstructure having been optimized are equivalent to those of foreign similar products.
    微观结构优化后的SEBS中试产品加工前后力学性能与国外产品相当。
  19. The effect of different varieties of rubber oil on the mechanical properties of styrene-ethylene/ butylene-styrene ( SEBS) triblock copolymer blend, and the that of PP, which was used as a modifier, on the modification of oil-extended SEBS were studied.
    研究了不同牌号的橡胶填充油对苯乙烯-乙烯/丁烯-苯乙烯共聚物(SEBS)力学性能的影响及以聚丙烯(PP)为改性剂对充油SEBS进行改性的效果。
  20. Oil-extended SEBS was modified by blending with Polypropylene ( PP) and Polystyrene ( PS) acted as modifiers.
    以PP、PS为改性剂对充油SEBS进行了改性。
  21. This research applies central composite design and response surface methodology to optimize the process parameters of SEBS modified asphalt.
    本研究应用星点设计效应面优化法对SEBS改性沥青工艺进行优化。
  22. PA6 was toughened with SEBS as toughening agent. The effect of SEBS content on the property of PA6, and the effect of oil-extended SEBS-g-MAH on the properties of different types of nylon were studied.
    以SEBS为增韧剂对PA6进行增韧改性,研究了SEBS的用量和处理方法对PA6性能的影响以及充油SEBSgMAH对不同牌号PA6性能的影响。
  23. The thermal property of SEBS-g-MAH was studied by DSC and TG.
    DSC、TG研究SEBS及其接枝产物SEBS-g-MAH的热性能。
  24. Various characterization methods were adopted to investigate rheological property and cryogenic property and microstructure of the blends of SEBS/ TPU.
    论文中采用了多种测试表征方法对SEBS/TPU共混材料的流变性能、低温性能、微观结构等进行了研究。
  25. The influence of filler and compatibilizer on the mechanical properties and structure of high hardness SEBS compound was studied.
    研究了填料及其增容剂对高硬度加氢苯乙烯/丁二烯/苯乙烯(SEBS)共混物性能的影响。
  26. Mechanical and rheological properties have been investigated of PA6/ SEBS blends, PA6/ SEBS-g-MAH blends and PA6/ SEBS/ SEBS-g-MAH blends in this paper.
    研究了PA6/SEBS和PA6/SEBS-g-MAH共混体系与PA6/SEBS/SEBS-g-MAH三元共混体系的力学性能与流变性能变化。
  27. Study on Modifying Recycled PET with SEBS and Compatibilizer
    SEBS及相容剂对回收PET的改性研究
  28. Anti-aging capability of SBS and SEBS modified asphalt and mixture
    SBS和SEBS改性沥青及混合料抗老化性能
  29. SEBS/ PP blends the use of high temperature and good solvent resistance, blends toughness improved, at the same time, after joining PP can improve the processing properties of SEBS.
    SEBS/PP共混物具有较高的使用温度和良好的耐溶剂性,共混后韧性得到了提高,同时加入PP后能提高SEBS的加工性能。
  30. At the same time the flame retardant mechanism of system of research, and flame retardant system on dynamic mechanical properties of SEBS/ PP, effect on the crystallization behavior of.
    同时对其阻燃机理进行系统的初探,并研究阻燃体系对SEBS/PP动态力学性能、结晶性能的影响。