ablating
英
美
v. 烧（消，腐）蚀；（融化，蒸发）掉；风化；剥（脱）落; 切开（除）；使除去；使消除
ablate的现在分词
双语例句
- Methods 126 cases with ablating parotid glands were retrospectively analyzed.
方法对126例腮腺切除术病例进行回顾性分析。 - Objective To analyze the causes of facial palsies after ablating parotid glands.
目的分析126例腮腺切除后产生面瘫的原因。 - This technique enables a "single shot" PVI by placing the balloon at the PV ostium and ablating circumferentially around the PV ostia with a single energy application, the researchers explain.
研究人员解释说这项技术能通过置于肺静脉口的球囊单次射出“一枪”的能量环形消融肺静脉口。 - The data guide lasers in ablating tiny amounts of tissue.
这些资料指引雷射修饰角膜上的微量组织。 - Evaluation of cognitive functions in opiate addicts of ablating the nucleus accumbens via stereotactic surgery
立体定向双侧伏隔核射频毁损对阿片类药物成瘾者认知功能的影响 - High intensity focused ultrasound technique has high precision in ablating tissues, and has much choice in transducers.
高强度聚焦超声对组织切除具有很高的精确性，换能器探头的选择也较为灵活。 - Geometric model of the wheels and thermal conduction model of single laser pulse ablating resin-bonded CBN wheels have been established.
建立了砂轮的几何模型和单个激光脉冲烧蚀树脂CBN砂轮的传热模型。 - Ablating alternately Er and Si targets with the pulse-number-ratio of 1:3 by a XeCl excimer laser, Er-doped amorphous Si films were prepared in Ne gas of 10 Pa or vacuum.
采用XeCl脉冲准分子激光器，保持激光脉冲比为1∶3，分时烧蚀Er靶和高阻抗单晶Si靶，在10Pa的Ne气环境下沉积了掺Er非晶Si薄膜。 - Temperature and mechanics effect measurement of plasma induced by laser ablating hard aluminum
激光烧蚀硬铝产生等离子体温度和力学效应测量 - We obtained laser induced plasma by laser ablating aluminium with an Nd: YAG laser, using time and space resolved spectroscopy, the effects of ambient gas breakdown on the emission characteristics of laser induced plasma were studied.
我们使用Nd：YAG激光器烧蚀金属Al靶获得等离子体，利用光谱时-空分辨技术，关于环境气体分解及其对等离子体辐射特征的影响进行了研究。 - The trend of globalization is pitilessly ablating the varieties of ethnic cultures.
全球化趋势正无情地消蚀着各民族文化的多样性。 - This paper represents a mathematical model of transpiration cooling control system with two-dimensional heating and surface ablating.
本文给出二维加热且具有表面烧蚀的发汗控制数学模型。 - The mechanisms of ablating tumor with high intensity focused ultrasound technique raised in recent years have been comprehensively reviewed in this paper.
本文对近年兴起的高强聚焦超声技术切除肿瘤的机理，做了全面的评述与讨论。 - An experimental study was carried out on the ablation wedge, the turbulent wedge on an ablating surface.
本文研究烧蚀表面上的一种尖楔状沟槽，简称熔楔。 - A new method of inscribing diffraction gratings by using a focused near-IR 800 nm femtosecond laser ablating gold film on glass substrate was reported.
提出了一种新的制备光栅的方法，利用800nm的飞秒激光扫描蒸镀在石英玻璃衬底表面的金薄膜，通过烧蚀金薄膜在衬底表面形成衍射光栅。 - The ablating model of a bulk target irradiated by a pulse laser is set up.
给出脉冲激光作用块状靶材的烧蚀模型。 - The mechanism of the continuum radiation of the plasma induced by laser ablating aluminum is discussed.
简要讨论了激光诱导等离子体连续辐射的产生机理。 - Numerical simulation of radiation ablating aluminum foils
辐射烧蚀铝箔数值模拟研究 - The finite element analysis and calculation of heat transfer in ablating bodies are presented.
本文采用有限元法，分析和计算了有热解的再入烧蚀体的传热问题。 - Influence of Pulse Repetition Rate and Pulse Energy on Ablating Normal Human Postmortem Aorta by Excimer Laser
脉冲频率和单脉冲能量对准分子激光消蚀人尸正常主动脉的影响 - An experimental research and analysis of flowing patterns on ablating shapes
烧蚀形状的实验研究与流态分析 - This paper presents the major problems with using spectroscopic methods for measuring the parameter'profiles in ablating boundary layers of reentry simulation tests in arc jets.
采用发射光谱法对电弧射流中再入模拟烧蚀边界层的参数分布进行测量，主要问题是如何获得对气体状态模型的确切了解和实现同时具有高空间分辨率、时间分辨率和光谱分辨率的辐射测量技术。 - At the edge, composites were ablated slightly. There were many ablation products and SiC matrix melt on the ablated surface, preventing the ablating of the substrate material. The main ablation mechanism is thermo-oxidation ablation.
烧蚀边缘烧蚀不明显，烧蚀产物和SiC基体熔融后覆盖在烧蚀表面，阻碍了复合材料的进一步烧蚀，复合材料的烧蚀以氧化为主。 - Electrons and ions in plasma by Excimer Laser ablating of the solid sample are collected by the electrodes.
准分子激光烧蚀固体样品产生激光等离子体，用外加直流电场方法收集电子、离子。 - The fabricating technique of thin solid films deposited by pulsed laser ablating spray is a new technique.
激光烧蚀溅射沉积薄膜技术是一项新的固体薄膜制造技术。 - The dynamic model and the basic equation of the isothermal expansion and the adiabatic expansion of the PLD are set up. The finite difference method was used to simulate the evolution of the plasma produced by the laser ablating the target with the time.
建立能反映PLD技术的前两个阶段，等温膨胀和绝热膨胀阶段的动力学模型及基本方程，使用有限差分法对激光烧蚀靶材产生等离子体随时间的演化进行了模拟。 - Ablating resistance property, load-bearing property and wave-transparent property were evaluated through analyzing high temperature oxidation mechanism of Si-B-N-O system.
系统分析了Si3N4材料的氧化机理，对氮化物基材料以及罩体的耐烧蚀性能、承载能力和透波性能进行了测试和模拟考核。 - Vaporizing and ablating human tissue under the water condition is still a difficult problem in the medicine field.
在激光医学应用领域中，带水环境下汽化、消融人体组织是激光医学界的一个难题。 - Biocompatible fluorescent carbon nanoparticles ( CNPs) were prepared by laser ablating carbon black or graphite suspended in the organic solvents, the tunable of peak in the PL spectrum was realized by adjusting the solvents.
激光烧蚀炭黑或石墨的有机悬浮液制备出了具有生物相容性的发光碳纳米颗粒，通过变化有机溶剂的种类实现了发光碳纳米颗粒的发光峰位调控。