actuator

1. A forward design method of clutch hydraulic actuator was established based on automated mechanical transmission systems.
   以电控机械式自动变速系统为研究对象，建立了自动离合器液压执行机构的正向设计方法。
2. Valves with this option have a hand wheel mounted on top of the actuator for manual valve operation.
   配置这种备选件的阀门在执行器顶部安装一个手轮用于手动阀门操作。
3. Type actuator controls and/ or accessories required.
   所要求的执行机构类型控制器和/附件。
4. Simulation analysis for actuator is conducted and the structure of actuator is optimized;
   对设计结构进行仿真分析，并对所设计的驱动器结构进行优化；
5. Using sensitivity analysis, a design method of optimal piezoelectric actuator placement in composite adaptive plate is investigated.
   采用灵敏度分析方法，研究了复合材料板壳型自适应结构中压电作动器的位置设计。
6. Micro actuator is the kernel part of MEMS, with wide application range and important research value.
   微执行器是微机电系统的核心部件，应用范围广泛，具有重要的研究价值。
7. This paper deals with the problem of stabilization and L_2-gain analysis of networked control systems subject to actuator saturation.
   针对含执行器饱和网络化控制系统，研究其镇定问题与L2增益分析。
8. The electromagnetic actuator ( EMA) used in the electronic control system of highspeed diesel engine was designed.
   研制了用于高速柴油机电控系统的电磁式执行器，介绍了电磁式执行器的结构及原理。
9. The application of variable structure control to the actuator load system was studied.
   研究了舵机加载系统的变结构控制问题。
10. Valve actuation utilizes a mechanical power device, an actuator, to operate a valve.
    阀门执行机构是一种采用机械力的设备，一台执行机构操作一个阀门。
11. The principle of the novel piezoelectric actuator and the scanner were described, and the frequency response was measured.
    介绍了新型压电驱动器和扫描器的工作原理，测试了扫描器的频响特性。
12. The output performance of this linear actuator is analyzed based on experiments.
    在实验的基础上分析了该驱动器的输出性能。
13. Closed cycle proportion spherical valve pneumatic actuator system is analyzed, and its complete mathematical model is established.
    对小型闭环比例气动舵机进行了分析，建立了完整的闭环比例气动舵机数学模型。
14. Technical parameters of pneumatic actuator;
    气动执行机构的技术参数；
15. The structure and working principle of a self-contained electro-hydraulic actuator for turbine control systems are being illustrated.
    介绍了汽轮机控制系统中一种自容式电液执行器的结构和工作原理。
16. Several sensor conditioning circuits and actuator drive circuits were designed.
    设计了传感器调理电路和执行器驱动电路；
17. According to valve's control mode, it is divided into servo actuator and switch actuator.
    根据阀门的控制方式，可分为伺服型执行机构和开关型执行机构。
18. Theoretical analysis and experimental investigation of the dual-stage disk actuator system are discussed in detail in this paper.
    本文围绕着磁盘两级定位系统这一新兴的发展方向，对其有关理论和实际问题进行了深入地研究和讨论。
19. Based on the controllability and observability of the control system, the optimization of sensor and actuator placement is studied.
    基于控制系统可控性和可观性准则，对致动器/传感器的优化配置进行了分析。
20. This valve with electric actuator can realize remote microcomputer control.
    该阀门配电动执行器可实现远程微电脑控制。
21. Thin film piezoelectric element, its manufacturing method, and actuator using the same.
    YukoOgawa：薄膜压电体元件和其制造方法以及使用其的驱动器。
22. Refer to Crane actuator bulletin for details of pneumatic and electric actuators.
    ·请参阅美国克雷恩有关执行机构的资料，了解气动和电动执行机构的详细资料。
23. The structure of auto gate lock switch, gate lock controller and gate lock actuator are introduced.
    简明叙述汽车门锁的发展过程，介绍了汽车门锁开关、门锁控制器和门锁执行机构的组成。
24. EH system hydraulic actuator is the most important part of EH control system.
    EH系统油动机是EH控制系统的重要组成部分。
25. Magnetostrictive actuator is a new type of actuator, and its designing is particular.
    超磁致伸缩驱动器是一种新型驱动器，其设计理论和方法具有特殊性。
26. The application of Ethernet in actuator control system is studied with practice.
    对以太网在执行机构控制系统中的应用作了实践性研究。
27. The principle of the actuator was analyzed and the mathematical model was set up.
    在对驱动器结构进行分析的基础上，建立了工作台的数学模型。
28. Characteristics of driving performance of piezoelectric bimorph were studied for large displacement piezoelectric actuator.
    针对大位移压电陶瓷驱动器，研究了压电陶瓷双晶片的驱动效能。
29. The modeling and displacement tracking control of a piezoceramic actuator with complex nonlinear hysteresis was studied.
    研究了压电陶瓷驱动器的复杂非线性滞回动力学系统建模及其位移跟踪控制问题。
30. A linear ultrasonic motor based on the two different in-plane bending modes of rectangular actuator were presented.
    提出了一种矩形振子面内弯曲模态直线超声电机，分析了振子面内弯曲模态的激发原理及电机的驱动机理。

noun

1. a mechanism that puts something into automatic action