安瓿(装注射药液的小玻璃瓶,缩略形式为amp) An ampoule is a small container, usually made of glass, that contains a drug which will be injected into someone. The abbreviation amp is also used.
Grade A: The local zone for high risk operations, e.g.filling zone, stopper bowls, open ampoules and vials, making aseptic connections. 级:用于高风险的生产操作,如灌装区、加盖区、容器开口区、和进行无菌连接的地方。
We are able to fill liquids, creams, salts, powders, and glitter products into bottles, jars, tubes, ampoules, crimped sprayers and sachets. 我们可装入液体液霜盐类粉末及使脸部亮丽产品进瓶子罐子管子安瓶喷射管及小包袋里。
Such as: oral liquid bottles, ampoules, syringes bottles, batteries, ham, sausage, test tubes, pen, lipstick, solid plastic bottles. 适用于较小直径的不易站立的物体贴标,如:口服液瓶、安瓿瓶、针管瓶、电池、火腿、香肠、试管、笔筒、唇膏、固体胶瓶等。
Ampoules and unopened nasal spray bottles should be stored in a refrigerator ( 2& 8 ℃). 安瓿或未开启的喷雾剂瓶应存于冰箱(2-8℃)中。
OBJECTIVE To investigate the difference of insoluble particles and microorganism contamination of plastic and glass ampoules produced by clinical use. 结论使用易开型聚乙烯塑料安瓿可明显减少在开启过程中产生的不溶性微粒,且可以减少在使用过程中的微生物污染。
This standard solution was accurately prepared in super-clean laboratory with KNO3 and sub-packed in20 ml ampoules. 本标准溶液以硝酸钾在超净实验室中准确配制并分装于20毫升安瓿中。
Although the infections were not life-threatening, the vaccine ampoules should have been treated before being discarded. 虽然这些感染没有危及生命,但疫苗安瓿在被弃置之前本应得到处理。
The utility model provides an inner-tough type abrasive-wheel bottle cutting tool, relating to a tool for opening ampoules. 一种内韧式砂轮切瓶刀,涉及一种开启安瓿的工具,由套筒和内韧式砂轮组成,内韧式砂轮固定安装于套筒上端的内壁上。
Orthogonal Optimum Design of Carbon Coating on Quartz Ampoules for Crystal Growth 晶体生长用石英玻璃管镀膜工艺的正交实验研究
Human blood in sealed ampoules 人血,装在密封的安瓿中
These tiny ampoules are so small that it could easily pass through the skin and gives the skin radiance. 这些微小的细颈瓶是很小的它可能容易地穿过皮肤并且给皮肤发光。
Containers closed by fusion, e.g.glass or plastic ampoules should be subject to100% integrity testing. 用熔融方法密封的容器,如玻璃或塑料安瓶要100%做完整性检查。
The carbon films coated on the inner surface of quartz ampoules in different technological conditions were tested and analyzed by microscope and thrust analytic instrument. 使用金相显微镜、推力分析仪测试等手段研究了镀碳工艺参数对碳膜的表面形貌、碳膜和石英结合力的影响。
Filling machine, industrial, for bags, bottles, boxed cans, ampoules and other containers Both cases and jars were often highly ornamented. 工业用袋、瓶、箱、罐、安瓿及其他容器填机这些皮箱和陶罐通常都有讲究的装饰。
The most important factors that affecting the rate of easy-to-break of ampoules were both the outer diameter of the neck of ampoules and the length of cutting mark. There was a significant difference compared with each other in the same specification ( P < 0.01). 影响安瓿易折率最重要的因素是颈段的外直径与割痕长度,同规格间比较差异有显著性(P<0.01)。
The reliability of the method, the serviceability of reagents packed into ampoules, interfering factors, and operating conditions of this ampoule method are studied photocolometrically. 本文对方法的可靠性、稳定性、干扰因素、测定条件等进行了研究。
Study on Stressed Enamel for Easy Breaking Ampoules 易折安瓿瓶应力釉研究
The influence of pretreatment and sealing of ampoules used for irradiation of Fricke-dosimeter on its precision of application is studied. The optimal method of pretreatment and sealing could make the precision of measured values reach ± 1%. 本文讨论了作为Fricke剂量计辐照容器的玻璃安瓿的预处理和封装方法对其精密度的影响,给出了最佳的预处理和封装方法,从而保证了测量值精密度在±1%以内。
The influence of pretreatment and sealing of ampoules on the precision of Fricke dosimeter HEART OF GLASS Fricke剂量计玻璃安瓿预处理及封装对其精密度的影响
Automatic system for washing drying and sealing ampoules 安瓿自动冲洗吹干圆封系统
Research status quo of ampoules disinfection and its relevant problems 安瓿消毒及相关问题研究现状
Research on Glaze for Easy-Breaking Ampoules 曲颈易折安瓿易折环釉料的研究
DL LA polymerized in sealed ampoules, weight average molar mass was above 10 × 10 4. DLLA在真空封管下聚合,重均摩尔质量(Mw)大于10.0×104g/mol。
Preliminary study of far infrared ray sterilization at 2ml injection ampoules 远红外线对2ml安瓿灭菌作用的初步研究
Water injection, ampoules as containers, has been widely used in clinical medical, and most was injected into the body through meridians or intramuscular. 以安瓿瓶为容器的水针剂已经广泛应用于临床医疗,并大部分通过静脉注射或肌肉注射进入到人体内。