Effect of Solidification Structure in Strip Cast Ferritic Stainless Steel on Grain Colonies of Cold-Rolled and Annealed Band 铁素体不锈钢铸轧薄带凝固组织对冷轧退火带晶粒簇的影响
Study on C-V Characterization of Hafnium Aluminate Gate Dielectric Annealed in N_2 and NH_3 N2和NH3退火对铪铝氧栅介质C-V特性的影响
And cracks appear in the film because tensile stress is too large when the sample is annealed at400 centigrade. 在400℃退火后,由于张应力太大,薄膜表面出现了裂纹。
Laser annealed silicon on sapphire 激光退火的蓝宝石上硅结构
The dynamic change process of the crack coppicing and extending on annealed Q& P steel was in-situ observed by SEM, and the micro-crack characteristic was studied. 采用扫描电镜(SEM)原位拉伸观察了Q&P钢退火组织断裂过程中裂纹萌生和扩展的动态变化过程,并对其微观断裂特征进行了研究。
( of metal or glass) not annealed and consequently easily cracked or fractured. (关于金属或玻璃)未退火因而容易破碎或断裂的。
These indicate that the film annealed at600 ℃ has the best crystalline quality. 这表明在600℃下退火的样品具有最好的晶化质量。
Formation of the coarse grains in annealed low carbon steel sheets by EBSD analysis 低碳钢退火板中粗大晶粒成因的EBSD分析
Used annealed paving blocks. 使用韧化的铺地块料。
The results indicate that the energy of the annealed laser have important effect on the crystallization of the films and the size of nanoparticles. 结果表明,激光能量对非晶薄膜的晶化和纳米晶粒尺寸有重要影响。
The change rule of the microstructure of the coldrolled Sisteel annealed under different current was researched. 研究了不同电流条件下退火冷轧无取向硅钢组织的变化规律。
The films were annealed at different temperature and for different time. 在不同温度下,用不同时间对薄膜进行了循环退火。
Microstructure and magnetic properties of [ Ag/ FePt]_ ( 10) multilayer films with different annealed time 不同退火时间对[Ag/FePt](10)多层膜磁性能和微结构的影响
Bright heat treatment of stainless steel are martensitic stainless steel ( such as the400 series), bright quenching, austenitic stainless steel ( such as the300 series), bright annealed. 不锈钢的光亮热处理有马氏体不锈钢(如400系列)光亮淬火、奥氏体不锈钢(如300系列)光亮退火。
Why shall harden steel be annealed? 淬火钢为什么要退火呢?
In this paper, various types of optical glasses are studied for this effect by interferometric method using rectangular bar specimens annealed under bending. 本工作使用在弯曲加压下退火的矩形棒状玻璃样品,利用干涉法研究了五种光学玻璃的折射率热应力效应。
The samples prepared were annealed in air atmosphere at different temperatures. 在空气中对样品进行不同温度的退火处理。
In the first, it is annealed, meaning it is run through a furnace to be softened. 在第一,它是退火,这意味着它是通过一炉运行到软化。
Tools which have been repaired by welding must have been annealed under stress-free conditions. 补焊的模具需要进行无应力退火。
The gray cast iron offers excellent damping properties and Meehanite process ensures the casting is properly heat treated and annealed before aging. 在灰铸铁提供了很好的阻尼性能和Meehanite进程,确保正确的铸件热处理和退火前老化。
Microstructure and Residual Stress of Cu Films Annealed at Different Temperatures 退火温度对Cu膜微结构与应力的影响
Above this point the hardness can be increased only slightly, because steels above the eutectoid point are made up entirely of pearlite and cementite in the annealed state. 高于此点,由于超过共析点钢完全由珠光体和退火状态的渗碳体组成,硬度增加并不多。
However, abnormal grain growth and other texture components appeared in the substrate trip after annealed at1400 ℃. 当退火温度达1400℃时,出现晶粒异常长大现象并伴有其它织构成分出现。
High-speed tool steels, hot and cold processed steels, rust-resistant steels, annealed steels and carbides. 高速钢,热作钢冷作钢,不锈钢,退火钢和硬质合金。
Photoluminescence of as-grown and annealed ZnO films on Ti-buffered Si ( 111) substrates Ti缓冲层及退火处理对Si(111)基片上生长的ZnO薄膜结构和发光特性的影响
The grain boundary character distributions in annealed 304 stainless steel at high and low temperature after slight cold-rolling 小形变冷轧304不锈钢高温和低温退火晶界特征分布研究