bents

英 美

网络  班茨

双语例句

  1. If the floor is not sufficiently rigid to transform the loads, a horizontal bracing system must be provided between bents.
    如果楼面没有足够的刚度去传递这些荷载。那么还必须在排架之间增加水平支撑系统。
  2. Resting on H shaped steel racks called "bents", long sections of the pipeline follow a zigzag course high above the frozen earth.
    枕在H型的铁架上，管道长长的一部分在冰冻地面的上空走着“之”字形。
  3. Once gimbal got heated it bents itself toward platter's surface and this action reduces flying height.
    一旦得到了热烈的万向节是本茨对盘片表面上的行动本身，这降低了飞行高度。
  4. The cross girder center segments of the bents were field bolted.
    构架横梁的中间段在工地用螺栓连接。
  5. Design and Application of 27m High Large Supporting Bents to Construction of Entrance Hall in Tall Building
    27m高大支撑排架在高层建筑门厅施工中的设计与应用
  6. Experimental Study on the Distribution of Horizontal Force Acting on the Wharf Bents
    水平力在码头排架中的分配试验研究
  7. Bents may be braced in a number of ways. The full diagonal bracing is the most economical type of wind bracing.
    排架的支撑方法有多种。最经济的抗风支撑形式是完全对角支撑。
  8. The wind was blowing in gusts. But towards six the storm abated, and a drier breeze shook the moisture from the grass bents.
    但是快到六点钟的时候，风雨停息了，一阵较为干燥的轻风吹拂掉草茎上的水气。
  9. The Vierendeel type of braced bents has the advantage of being easily treated architecturally and can be used on the outside walls as part of the building facade.
    结构型的支撑排架具有易于建筑处理的优点，因此可用于外墙作为建筑物立面的一部分。
  10. Analyzing the Elasto-Plastic of Single-Storey Factory Building Bents in Earthquake Response
    单层厂房排架弹塑性地震反应分析
  11. In order to meet requirements of structural design specification, foundation treatment was conducted by means of replacement of the filling materials in the foundation, rigid connection of the transversal beams with columes was adopted to make transversal bents become rigid frames.
    通过采用地基换填处理，以及楼体横梁与立柱采用刚性连接，使横向排架形成刚架结构等方法，使结构设计满足规范要求。
  12. Internal force calculation of bents of standing-pile wharfs considering influences of joint-panels and shear deformation
    考虑节点域和剪切变形影响的高桩码头横向排架的内力计算
  13. Plane calculation method is usually adopted for high-piled wharf design, i. e., to calculate the interal force of structure in the transverse longitudinal plane directions, in which, transverse bents are calculated as flexible platform and longitudinal girders as elastic supporting continuous girders.
    在高桩码头设计中，通常采用平面计算方法，按纵向和横向2个平面进行结构内力计算，即横向排架按柔性桩台计算，纵梁按弹性支承连续梁计算。
  14. An Accurate Method of Calculating Internal Force and Change of Position of Bents of All-vertical-piled Wharf under Horizontal Forces
    求解水平力作用下全直桩码头排架内力和变位的一种较精确方法
  15. Construction Techniques for Erecting Arch Bridges with Large Lifting Capacity Cable Crane Mounted on Movable Bents
    大吨位移动塔架缆索吊机架设拱桥施工技术
  16. Since shafting bearing faults occurred to a generating unit after running for 20, 000 hours, the lower bents of the quaternary superheater burst in succession after start and stop for several times.
    某机组运行2×104h时因汽轮机轴承出现故障，多次启停后导致锅炉四级过热器下弯头处相继发生爆管。
  17. The Method for Calculating the Temperature Effect on Longitudinal Bents Considering the Elastic Resistance of Transverse Beams
    考虑横梁弹性抵抗的纵向排架温度内力分析法
  18. Space vibration of complex Bents
    复杂排架的空间振动
  19. The performance of hysteresis type damper and the bents of elevated pile wharf with and without absorbing adaptor are tested.
    本文对滞回式阻尼减震元件的性能、设与不设减震接头的高桩码头排架进行了试验。
  20. In this paper, the formula for computing the stability of single-story mill bents has been developed by applying the formula of computing column buckling under vertical force expressed in integral form.
    本文将积分形式的纵力弯曲公式用于排架稳定性计算，得出一个简便而精确的排架稳定性计算公式。
  21. Space Loads Orthogonalization and Combination on 3-dimensional Structures of Frames and Bents
    框排架三维结构的空间荷载正交化及组合
  22. The distribution of the collusion force on the bents is discussed.
    对船舶碰撞力在排架上的分配进行了讨论。
  23. Method of Analyzing Single-Story Mill Hinged Bents and Multistory Rigid Frames Taking Account of Both the Rotation of Footings and the Deformation of Columns
    单层厂房铰接排架和多层框架结构考虑基础转动及柱变形的内力分析法
  24. Analysis of symmetrical multi-storey and single-bay bents under wind loads and Vierendeel trusses with symmetrical parallel chords by lin's method of one-cycle moment distribution
    用林氏力矩一次分配法分析对称式多层单间排架的风应力及对称式平行弦连框桁架
  25. Analysis of continuous beams and multi-storey and multi-bay bents by influence moments
    用影响力矩解算连续梁及多层多跨排架
  26. Safety Application of Small Radius Tube Bents in Heating Surface of Furnace
    小弯曲半径受热面管在锅炉中的安全使用
点击展开全文

考试分类

行业分类

柯林斯词典词频分级词汇

其他分类