braze

1. The braze coating adheres instantly to the surface of the tube so no dry time is required.
   采用该系统可将焊剂涂覆到铜钎焊管的外面。焊剂可迅速粘附到管的表面，因此不需要干燥时间。
2. The Growth Behavior of Interfacial IMC of Sn-0.7Cu/Cu by Laser Braze Welding
   激光钎焊Sn-0.7Cu/Cu界面IMC生长行为
3. According to the technology and configuration of the vacuum braze welding metal honeycomb parts, the technique of ultrasonic inspection for them was studied.
   针对金属蜂窝真空钎焊件的工艺及结构特点，探讨了利用超声波法对其质量进行检测的可行性和可靠性。
4. The moulding of the case utilizes the technology of full-vacuum braze welding for satisfying the sealing requirement.
   为更好的满足密封要求，机箱采用了整体真空钎焊技术进行制造。
5. The basic principle of vacuum braze and its application in manufacturing gas chromatograph are de-scribed.
   介绍了真空钎焊技术的基本原理及其在气相色谱仪气路部件加工中的应用。
6. The braze and interfacial microstructures were characterized by optical microscopy, scanning electron microscopy, and energy dispersive spectroscopy.
   在钎焊和界面微观结构的特点是光学显微镜，扫描电子显微镜和能谱。
7. Research on Braze Welding Procedure of Automobile Heat Exchanger in Nitrogen Oven
   汽车空调热交换器氮气炉钎焊工艺的研究
8. Making an Investigation in the Technological Method of the Medium-frequency Induction Braze Welding of the Rotor Copper Bar and End ˉ ring for the AC and DC Motor
   交直流电机转子铜条与端环中频感应钎焊工艺方法的研究
9. Copper phosphorus alloys. Useful for braze copper-copper or copper-brass, using flux.
   以铜和磷为主要成份，用于铜-铜或铜-铜合金的焊接，需要使用助焊剂。
10. Key Factors Effecting on Properties of Ti_3Al Braze Joints
    影响Ti3Al钎焊接头性能的关键因素探索
11. It's also superior for braze welding of steel.
    这对钢的黄铜焊接也是较优的。
12. Blades and segments are welded by braze, which facilitate change of segment.
    刀头的刀柄和刀头分开使用铜焊焊接，容易更换刀头。
13. It only takes him a minute or two to braze the broken pneumatic limbs of his iron beasts.
    现在只需一两分钟就可以焊接他那些钢铁巨兽的气压式四肢了。
14. The braze alloy evaluated was also found to degrade fatigue properties under certain conditions of test.
    刹车合金的评价还发现，在一定条件下分解疲劳特性试验。
15. The main Reason for failure is the defect that caused by braze welding and component deflection of metallographical structure.
    钎焊形成的缺陷和钎缝金相组织成分偏析是导致疲劳裂纹产生的主要原因。
16. Braze Welding in Furnace was Used in Infrared Detector Module
    炉中钎焊在红外探测器组件中的应用
17. This paper introduces its application of wavelet transform in ultrasonic imaging testing of electric contact's braze quality inspection.
    本文介绍了小波变换在开关电触头钎焊质量超声检测中的应用。
18. The braze repair process of cracks in turbine guide vanes made from super-alloy K3 is investigated in this paper.
    本文主要对K3合金导向叶片裂纹的清理及补钎进行了研究。
19. This paper describes hydrogen shield diffusion braze welding technology for precise parts of copper and compound metal.
    本文阐述的是，铜及其合金精密零件氢气保护扩散钎接焊工艺问题。
20. Especially, the amorphous Ti-based braze materials which are widely used in astronautical and aeronautical fields were elaborated particularly.
    对不同状态钎焊料的性能特点进行了全面的比较，特别是对在航天、航空领域广泛应用的非晶钛基钎焊料进行了重点介绍。
21. The braze of stainless steel joints with wide clearance is made by pre filling alloy powder into the gap.
    采用先在钎缝间隙中预填合金粉，然后在钎缝外置放钎料进行钎焊的方法，解决不锈钢接头宽间隙的钎焊问题。
22. Development and Application of Braze Welding and Ti-Based Braze Materials
    钎焊及钛基钎焊料的发展及应用
23. Active brazing filler metal Ag Cu Ti and Cu Ti were chosen to braze directly cerment and stainless steel.
    选用活性钎料AgCuTi或CuTi对陶瓷与不锈钢进行直接钎接。
24. MARC software was used to simulate the temperature and stress fields of laser beam braze welding process of beryllium ring.
    采用MARC软件对铍环激光束钎焊过程的温度场和应力场进行了有限元分析。
25. Through macro and micro examination for braze welding impeller.
    对铜基钎料钎焊叶轮进行宏观、微观检查及断口电镜分析。
26. Study of elements spreading in composite plates when braze welding and surfacing
    钎焊和堆焊时复合板中成分扩散研究
27. Braze welding is one of the most commonly used technologies for joining aluminum alloys.
    钎焊是铝合金连接最常用的方法之一。
28. Braze welding is widely applied in the connection of Cu-Al.
    在铜铝的连接方法上，应用最为广泛的是钎焊。
29. In this paper, commercial and self-developed brazing alloy were used to join graphite and copper. Interface reaction mechanism of the brazed joints and preparation principle of braze alloy were analyzed.
    本文采用商用钎料和自己研制的新型钎料对石墨与铜进行钎焊，分析了钎料制备原理和界面反应机理。
30. / m. This process is successfully used to braze the commutator of graphite and copper.
    采用此工艺成功钎焊了石墨与铜的换向器。

verb

1. solder together by using hard solder with a high melting point