carbide

1. Inner Mongolia is China's calcium carbide production, use, sale province.
   内蒙是我国碳化钙生产、使用、销售大省。
2. Silicon carbide space-borne mirror was produced by reaction bonded process.
   采用反应烧结工艺制备了碳化硅空间用反射镜坯体。
3. For various reasons, most domestic enterprises to adopt the gypsum is calcium carbide treatment methods for stockpiling.
   出于多种原因，国内大多数企业采用的是对炭化钙石膏进行堆存处理的方法。
4. In this paper, the distribution and existent morphology of rare earths in cemented carbide have been studied.
   研究了稀土元素在硬质合金中的分布和存在形态。
5. Effect of Cerium on Grain and Carbide in Low Chromium Ferritic Stainless Steels
   铈对低铬铁素体不锈钢晶粒和碳化物的影响
6. The comprehensive utilization of carbide slurry was introduced.
   重点介绍了电石泥的综合利用情况。
7. Primary carbide microstructure evolution in the semi-solid hypereutectic high Cr cast iron has been studied at partial remelting temperature.
   研究了半固态过共晶高铬铸铁坯料部分重熔保温过程中初生碳化物的演变规律。
8. The toughest materials around are diamond ( a type of crystalline carbon) and silicon carbide.
   其中最为坚固的当属金刚石（一种碳的晶体）和碳化硅。
9. This paper studies the effect of the C content on microstructure and properties of nanosize cemented carbide.
   该文研究碳含量对纳米硬质合金组织和性能的影响。
10. This product is made by the precision machining with the tungsten carbide materials ( superhard alloy).
    该产品选用碳化钨材料（超硬合金）精密加工而成。
11. The experimental studies on iron carbide formation by two step method have been carried out.
    在实验室条件下进行了二步法制备碳化铁的研究。
12. It combines silicon carbide in the surface for initial slip resistance and aluminium trioxide throughout the thickness.
    它结合了碳化硅在表面初始滑移阻力和三氧化二铝的整个厚度。
13. The research and development of preparation processing of nanosize cemented carbide are reviewed.
    综述了纳米硬质合金制备工艺的研究与发展。
14. A solid solution of ferric carbide or carbon in iron; cools to form pearlite or martensite.
    含铁碳化物或含碳铁的固体溶体，冷却可形成珠光体或马氏体。
15. The wear patterns and wear mechanisms of solid cemented carbide are analyzed in high-speed milling of aluminum alloy.
    对硬质合金整体立铣刀高速铣削加工航空铝合金时的刀具磨损形态及其磨损机理进行了观察和分析。
16. Advanced production method of spherical cast tungsten carbide is introduced.
    介绍了球形铸造碳化钨先进的生产方法。
17. This paper describes the chlorination process of waste tungsten carbide powder.
    本文对废碳化钨粉的氯化反应进行了实验研究。
18. Refractory in the silicon carbide, clayey SiC has the most simple production process and the lowest price.
    在碳化硅质耐火材料中，粘土结合碳化硅是生产工艺最简单、价格最低的制品。
19. The process of synthetical harness of carbide slag slurry in PVC production by calcium carbide acetylene method was introduced.
    介绍了综合治理电石乙炔法生产PVC时产生电石渣浆的工艺技术。
20. At last, we induce and analyze appearance and distribute regulation for grinding-cracks of solid carbide cutting tools.
    最后对整体硬质合金刀具磨削裂纹等表面缺陷的形态分布规律进行了归纳和分析。
21. The results show that thermal fatigue cracks initiate at graphite cusps and in the pearlitic matrix and eutectic carbide.
    结果表明，热疲劳裂纹在石墨尖端处、珠光体基体及共晶碳化物中萌生；
22. This is related not only to the wearability, the surface roughness and the oxidation resistance of coating but also to the hardness, the toughness and the bending strength of carbide alloy A.
    这既与涂层的耐磨性、表面粗糙度和抗氧化性能有关，也与硬质合金A的硬度、韧性和抗弯强度有关。
23. The precipitation behavior, form, quantity and Composition of Carbide also Change.
    并影响了正火时碳化物的析出行为，种类，数量及成分。
24. The iron carbide constituent of steel and cast iron; very hard and brittle.
    铁的碳化物，组成钢和铸铁，极硬极脆。
25. The system pressure changed the adsorption abilities and pore size distributions of carbide and activated carbon.
    反应压力能够改变炭化产物和活化产物的吸附性能和孔径分布。
26. Our main products are Silicon Carbide, Alumina Ceramic, Tungsten Carbide, and Carbon-Graphite Seal Rings.
    我们的主要产品是碳化硅、质合金、石墨密封环和氧化铝陶瓷制品。
27. The synthesis of silicon carbide whiskers by double-heating method using carbon black and SiO_2 powder as raw materials is studied.
    以炭黑和二氧化硅微粉为原料，对双重加热法合成碳化硅晶须进行了研究。
28. In this paper, decarbonization of silicon carbide platelets by using a novel rolling oxidation furnace was studied.
    采用旋转式氧化脱炭炉这一新设备对碳化硅晶片的氧化脱炭进行了研究。
29. The fine grains, crack deflexion and grain-bridging are main toughening mechanisms of silicon carbide ceramic.
    细晶、裂纹偏转和晶粒桥联是碳化硅陶瓷的主要增韧机制。
30. MIM of cemented carbide adaptor of bayonet have been investigated.
    研究了硬质合金刺刀座注射成形工艺过程。

noun

1. a binary compound of carbon with a more electropositive element