carborundum

noun

1. 金刚砂，碳化硅（用作研磨材料）
   a very hard black solid substance, used as an abrasive

1. The grinding block made of carborundum abrasive, is very hard and sharp.
   磨光机磨块采用金刚石磨料制成，硬度极高，磨削锋利。
2. Slagging characteristics on carborundum combustion of boiler liners during pulverized coal stream combustion
   粉煤燃烧过程中锅炉碳化硅质卫燃带结渣特性
3. The bonded warehouse is flooring with carborundum which is wearable, dustproof, and anti-statics.
   仓库地面采用耐磨金刚砂，耐磨、防尘、防静电。
4. First, resin grinding tablets, cutting tablets from carborundum abrasive resin from chemical processing of raw materials.
   树脂打磨片、切割片由金刚砂磨料树脂化工等原料加工而成。
5. Materials for Rotating and Static Rings: Impregnating resin ( metal) graphite, Carborundum, hard alloy, etc.
   动，静环材料：浸渍树脂（金属）石墨，碳化硅，硬质合金等。
6. The Effect of the pH Value of Silica Solution on the Silica Coat of Carborundum
   陶瓷液pH值对碳化硅陶瓷涂层的影响
7. After setting, the surfaces of the specimens are ground down using carborundum and alumina.
   凝固之后，样品表面连续用金钢砂或氧化铝磨平。
8. Analysis on the economical running situation of China's superabrasives industry in 2008 Our Carborundum planks have been used in high-pressure electric ceramics broadly, widely used in electronic ceramic, emery wheel and magnetic material.
   2008年我国超硬材料行业经济运行形势分析广泛应用于高压电瓷行业、电子陶瓷业、砂轮业、磁性材料行业中。
9. Different methods to disinfect carborundum wheel have significant effect on the partical numbers in ampule.
   割锯安瓿的砂轮用不同方法消毒，对引入安瓿药液中微粒数差异有显著性。
10. Applicable sand material: Aluminum oxide Sand of# 26-# 320, carborundum, glass beads, Plastic sand blasting grains.
    适用砂材：＃26-＃320氧化铝砂、金刚砂、玻璃珠、塑胶喷砂粒等。
11. Our Carborundum planks have been used in high-pressure electric ceramics broadly, widely used in electronic ceramic, emery wheel and magnetic material.
    广泛应用于高压电瓷行业、电子陶瓷业、砂轮业、磁性材料行业中。
12. Carborundum has a crystal structure like that of diamond and is almost as hard.
    具有晶体结构，类似金刚石，几乎和它一样硬。
13. We repair the burner brand with carborundum by the technique of ramming.
    我们采用碳化硅材料，利用捣打技术恢复一号炉卫燃带。
14. I center specializing in the production of carborundum wearable Floor sales materials, product development and production sets, planning and design, project construction in one.
    我中心专业生产销售金刚砂耐磨地坪材料，集产品研制生产、规划设计、工程施工于一体。
15. On Periphery Circuit Design for Industry Control Computer System of Carborundum Furnace
    碳化硅炉工控机控制系统外围电路的设计
16. Study on Disinfection of Carborundum Wheel and partical Pollution of Ampule
    砂轮的消毒与安瓿药液微粒污染的研究
17. The analysis and research of carborundum in silicon alloy
    硅质合金中碳化硅的分析探讨
18. For the two kinds of abrasive grain& ordinary abrasive and ultra hard material, carborundum and diamond were chosen as samples for dispersing experiment.
    针对两大类磨料微粉&普通磨料和超硬材料，选择碳化硅和金刚石为例进行分散实验。
19. Characterization of UV Curing Materials Containing SiO_2 and Carborundum by Thermal Analysis
    热分析法研究含SiO2、金刚砂填充物的光固化材料
20. Computer Monitor and Control for Smelting Furnace of Carborundum
    碳化硅冶炼炉的微机监测与控制
21. The Temperature Control of Distant Infrared Carborundum Radiation Heating System
    远红外碳化硅辐射加热系统的温度控制
22. This paper describes the application results of Carborundum and cast stone in mineral processing equipment as well as the hot pressing technology for producing them.
    本文叙述了绿碳化硅砂、铸石砂在选矿设备中的应用效果以及热压生产工艺。
23. The test result shows that the greater the carborundum grain size, the more the carborundum content, the faster the tools wearing and tearing;
    试验结果表明：碳化硅颗粒尺寸越大、碳化硅含量越多，对刀具的磨损速度越快；
24. UV cured material was prepared with carborundum, SiO_2 and photopolymer resin. The performance of the cured material were studied through DSC and TG according to the special instance when it is used as grinding wheel.
    该文对以金刚砂为磨料、SiO2为填充物、光固化树脂为结合剂的超薄砂轮光固化材料进行了DSC、TG分析。
25. Study of the relationship of non-linear property with surface silica content of carborundum
    碳化硅非线性性质与表面二氧化硅含量关系的研究
26. Based upon analysis of the reasons caused the cracks in concrete pre-control measures and optimal mix proportion design are introduced. High accuracy regulation and control technology and mechanical polishing technique are adopted, which ensure construction of large area concrete carborundum floor.
    通过对混凝土产生裂缝的原因进行分析，采取预控措施，优化配合比设计，采用了高精度螺纹调控技术控制成型地面的平整度和机械磨光施工技术，保证了大面积混凝土金刚砂地面的施工质量。
27. Study of the effects of thickness and carborundum content on the non-linear property of carborundum anti-corona coat
    防晕层厚度和碳化硅含量对其电学性能影响因素的研究
28. Determining the SiC Contents in Carborundum by the Method of High-frequency Infrared Carbon-sulphur
    高频红外碳硫法测定碳化硅中SiC
29. The thermoanalysis results combined with carborundum brick performance tests will do much help to determine boiler starting mode, heating rate and temperature reduction conditions in order to guarantee the safety of fireproof brick wall and even the boiler.
    上述结合碳化硅砖性能测定的工程热分析结果对实际确定增压锅炉启动方式、升温速率和降温模式，以保证耐火砖墙乃至锅炉的安全有重要参考价值。

noun

1. an abrasive composed of silicon carbide crystals