chloroprene

1. The article explains the design, applications and production process of the architectural chloroprene rubber adhesive.
   叙述了氯丁橡胶胶粘剂在建筑业的应用以及它的配方设计和制备方法。
2. Study on preparation and properties of chloroprene rubber adhesive for wood working The application prospect and process of RTV CR adhesive were related.
   木工用氯丁橡胶胶粘剂的制备与性能研究简述室温硫化氯丁橡胶胶粘剂的应用前景及工艺路线。
3. Species are natural rubber, styrene-butadiene rubber, nitrile rubber, chloroprene rubber, isobutyl rubber, polyurethane rubber, fluorine rubber and so on.
   品种有天然橡胶、丁苯橡胶、丁腈橡胶、氯丁橡胶、异丁橡胶、聚氨酯橡胶、氟橡胶等。
4. Several points relating to the formula of chloroprene rubber adhesive are discus-sed.
   论述了鞋用氯丁橡胶胶粘剂配方的有关问题。
5. Application and computer simulation of trapezoidal-rectangular three-dimensional spraying continuous mass-transfer tray in chloroprene distillation Simulation of Diabatic Distillation with Heat Integration between Column Sections
   梯矩形立体连续传质塔板在氯丁二烯精馏中的应用和计算机模拟塔段透热能量集成精馏塔模拟及研究
6. The rubber inner layer is made of natural gum or ethylene propylene diene rubber, and the rubber outer layer is made of chloroprene rubber or ethylene propylene diene rubber.
   橡胶内层的材质为天然胶或三元乙丙橡胶，外层橡胶的材质为氯丁胶或三元乙丙橡胶。
7. A new chloroprene rubber which has high mooney viscosity and high-crystallization rate is introduced here.
   介绍一种具有高门尼粘度、高结晶性能的氯丁橡胶。
8. Short CR, obtained by the polymerization of chloroprene.
   简称CR，由氯丁二烯聚合制得。
9. Preparation of Chloroprene Latex Modified with Vinyl Monomers via Emulsion Graft Polymerization and Corresponding Mechanism
   乙烯基单体乳液接枝改性氯丁胶乳的制备及其机理
10. The paper introduces the controlling principles in the chloroprene monomer production and the characteristics, configuration and application of the AC800M system.
    介绍了氯丁二烯单体生产过程的控制原理，同时介绍了AC800M系统的特点、组态步骤及应用情况。
11. The proposals were given that new varieties of carboxylated chloroprene rubber should be developed.
    建议开发羧基化氯丁橡胶新品种。
12. The microgel was prepared by the copolymerization of crosslinking agent A and chloroprene and the sol was prepared by emulsion polymerization.
    以氯丁二烯与交联剂A共聚制备微凝胶；用乳聚法制备溶胶。
13. Study on the Preparative Process and Property of the Waterproof Paint of PS Modifying Cation Chloroprene Latex Asphalt
    PS改性阳离子氯丁胶乳沥青防水涂料的制备和性能研究
14. Study on Chloroprene Rubber modified with Trans-1,4-polyisoprene
    反式-1,4-聚异戊二烯改性氯丁橡胶的研究
15. Emulsion copolymerization of chloroprene and isoprene initiated by potassium persulphate has been investigated.
    研究了以过硫酸钾为引发剂引发的氯丁二烯与异戊二烯的乳液共聚合，选择了乳化剂及调节剂，确定了共聚合的配方及条件。
16. The main material used is polyurethane elastomer and chloroprene rubber.
    带子的主体材料有聚氨酯弹性体和氯丁橡胶两种。
17. Application of Scorch Retarder P-X in Chloroprene Rubber Production
    防焦剂P-X在氯丁橡胶生产中的应用
18. The development in research of chloroprene rubber adhesive, sealing agent and paint at abroad
    国外氯丁橡胶粘接剂、密封剂及涂料研究进展
19. Study on the Chloroprene Rubber Adhesive System for Shoes
    鞋用氯丁橡胶胶粘剂体系的研究
20. Study on Structure and Properties of Chloroprene Rubber/ Butadiene Rubber Blends
    氯丁橡胶/顺丁橡胶共混物结构及性能研究
21. Emulsion copolymerization of chloroprene and styrene
    氯丁二烯与苯乙烯的乳液共聚合
22. Effect of raw material ratio and polymerizing process on the properties of the grafted chloroprene adhesive was discussed.
    讨论了原料配比、聚合工艺对接枝氯丁胶性能的影响。
23. The research development of adhesives made from multivariant graft modification of chloroprene rubber ( CR) and styrene-butadiene block copolymer ( SBS) were introduced. Its properties, uses and synthetic methods were expounded.
    介绍了氯丁橡胶（CR）、丁苯嵌段共聚物（SBS）的多元接枝改性胶粘剂研究进展，并对其性能、用途及合成方法作了概述。
24. Behaviors of different modifiers in emulsion polymerization of Chloroprene
    不同调节剂在氯丁二烯乳液聚合中的行为
25. Formulation, process technology and properties of cationic chloroprene latex modified emulsified pitch paint for bridges are introduced.
    介绍了氯丁胶乳改性阳离子乳化沥青的配方、工艺及其性能特点。
26. The process of imported twin screw extruder as finishing equipment of adhesive chloroprene rubber ( CR 244) was introduced.
    介绍了用进口双螺杆挤出机作为粘接型氯丁橡胶（CR244）后处理装置的工艺流程，探讨了其工艺条件及成品橡胶的性能。
27. Study on the chloroprene rubber/ acrylate rubber blend
    氯丁橡胶/丙烯酸酯橡胶共混研究
28. Study on Butyl Acrylate Grafted Chloroprene Rubber Used as Adhesive of polyolefin
    聚烯烃用氯丁胶接枝丙烯酸丁酯胶粘剂的研究
29. Chloroprene grafted adhesive modified by phenolic residue resin elevates its initial viscosity and ultimate strength.
    接枝氯丁胶用酚渣油树脂改性，可提高胶的初粘性，使最终强度提高，胶的成本降低。
30. Currently, the main production methods of chloroprene rubber include acetylene process and butadiene-based.
    目前，氯丁橡胶的生产方法主要有乙炔法和丁二烯法。

noun

1. derivative of butadiene used in making neoprene by polymerization