clamps

英 [klæmps] 美 [klæmps]

v.  (用夹具)夹紧,夹住,固定; 紧紧抓住; 紧夹住; 被抓住; 被夹紧; 用夹锁锁住(车)
n.  夹具; 夹子; 夹钳; 车轮夹锁(用于锁住违章停放的车辆)
clamp的第三人称单数和复数



柯林斯词典

  1. 夹子;夹具;夹钳
    A clamp is a device that holds two things firmly together.
    1. VERB (用夹具)夹紧,夹住,固定
      When you clamp one thing to another, you fasten the two things together with a clamp.
      1. Somebody forgot to bring along the U-bolts to clamp the microphones to the pole.
        有人忘了带把麦克风固定在支架上的U形螺栓。
    2. VERB 将…固定(在某处);紧紧抓住
      To clamp something in a particular place means to put it or hold it there firmly and tightly.
      1. Simon finished dialing and clamped the phone to his ear...
        西蒙拨完号,把听筒贴在耳边。
      2. He clamped his lips together...
        他紧闭双唇。
      3. You beg him to try just one spoonful, and he clamps his mouth shut...
        你求他就尝一匙,可他就是不张嘴。
      4. Peter jumped to his feet with his hand clamped to his neck.
        彼得一只手捂着脖子,腾地跳了起来。
    3. (将违章停放的车辆扣在原地的)夹钳,车轮固定夹
      A clamp is a large metal device which is fitted to the wheel of an illegally parked car or other vehicle in order to prevent it from being driven away. The driver has to pay to have the clamp removed.
      1. in AM, use 美国英语用 Denver boot

      2. VERB 给(车辆)上夹钳
        To clamp a car means to fit a clamp to one of its wheels so that it cannot be driven away.
        1. Courts in Scotland have ruled it illegal to clamp a car parked on private ground and then to demand a fine.
          苏格兰法院裁定,将停在私人地界上的车辆上夹钳并索要罚款的行为是违法的。
      3. in AM, use 美国英语用 boot


      双语例句

      1. You beg him to try just one spoonful, and he clamps his mouth shut
        你求他就尝一匙,可他就是不张嘴。
      2. If the government clamps down on the protestors, that will only serve to strengthen them in the long run
        如果政府镇压抗议者,从长远来看,这将只能使他们更加坚决。
      3. Some clamps that had held the device together came undone.
        用来将装置夹在一起的一些夹子松开了。
      4. Tighten inner hose clamps again.
        重新拧紧内软管卡箍。
      5. Slide hose clamps onto the steel flexi-pipes.
        将软管卡箍滑动到钢制挠性管上。
      6. Tighten the clamps using the special pliers or a commercially available special pliers.
        使用专用钳子或商用的专用钳子拧紧卡箍。
      7. Tighten screw-type hose clamps in correct position.
        将螺钉式软管卡箍在正确位置拧紧。
      8. The steel pipes should be secured with clamps.
        这些钢管应该用夹子固定起来。
      9. The SC Series Swing Clamps combine linear and rotary motions.
        在SC系列摇摆夹结合线性和旋转运动。
      10. Unscrew the screw-type hose clamps for this purpose.
        为此,请松开螺旋式软管卡箍。
      11. Two elastic rail clips or two tension clamps.
        两个弹性轨夹或两个张力夹。
      12. Encoders with a synchro flange can be attached to the machine by means of three clamps.
        有一个同步器凸缘的入码器能经由三个夹子被附上到机器。
      13. Undo four screw-type hose clamps on resonance tube.
        松开谐振管上的四个螺旋式软管卡箍。
      14. Position C-pillar trim panel and press it into the fastening clamps.
        放置c柱装饰板并将其按入到固定卡子中。
      15. Loosen both hose clamps at intake distributor.
        旋开进气分配器上的两个软管卡箍。
      16. Unscrew the fastening nuts to the fastening clamps of both refrigerant lines.
        从两条制冷剂管路的紧固卡箍上拧下紧固螺母。
      17. Check for loose connections, rusted clamps.
        检查连接处有无松动,夹子是否生锈。
      18. Remove clamps from resonance tube.
        从谐振管上拆下卡箍。
      19. Loosen screw-type hose clamps and disconnect intake-air distributor.
        松开螺钉式软管卡箍并断开进气分配器。
      20. The distance between the clamps of the safety cable is checked.
        检查了安全索卡箍之间的距离。
      21. She clamps down on it and continues reading.
        她压住了它,继续看了下去。
      22. If there is corrosion, removing the exhaust pipes and clamps is made easier by heating.
        如果有腐蚀,通过加热就能很容易地将排气管和卡箍拆下。
      23. To do this, tighten the clips and clamps.
        为此,请拧紧卡子和卡箍。
      24. Spring force clamps and hydraulic force release it.
        弹簧力钳住和液压力量释放。
      25. Disconnect the two hoses with the hose clamps.
        断开两个软管及软管卡箍。
      26. I may even install clamps or wire ties if they become necessary.
        我可能甚至安装夹具或电线上的联系,如果他们成为必要。
      27. Connect the three hoses to the upper box of the distributor pipe and fasten the hose clamps.
        将三根软管连接到分配器管的上部箱体中并拧紧软管卡箍。
      28. For securing clamps and hose clamps.
        用来紧固卡箍和软管卡箍。