crosshead

1. It is a relentless or irresistible action of the machine grips or crosshead.
   这是机器夹头或十字头会产生一种坚韧的，不可抗拒的动作。
2. Analysis of crosshead pin cracking failure of high-pressure reciprocating hydrogen compressor and Countermeasures
   高压往复式氢气压缩机十字头销断裂原因分析与对策
3. Liner for crosshead lubricating pump
   十字头润滑油泵套筒
4. Consider now the same test carried out with servo control based on crosshead travel or displacement of the grips.
   现在我们来研究用十字夹头位移或位移夹头伺服控制来完成相同的试验。
5. Secure special tool centring aid to the crankcase using two countersunk crosshead screws.
   使用两个沉头十字头螺钉将专用工具辅助定心工具固定到曲轴箱上。
6. Analysis on ablation failure of connecting rod and crosshead in large 6HF/ 3 type reciprocating compressor
   6HF/3大型往复压缩机连杆与十字头销烧蚀故障分析
7. The utility model relates to a novel crosshead connecting structure which is composed of a cylinder rod, a spherical washer, a crosshead, a cross pin and a connecting rod;
   一种新十字头连接结构，由活塞杆、球面垫圈、十字头、十字头销和连杆组成。
8. The plunger is clamped into the crosshead.
   活塞固定在十字头中。
9. The article introduces a technique of repairing the crack in the moving crosshead of an extrusion press, based on CO2 gas shield welding.
   本文介绍了一种采用二氧化碳气体保护焊对挤压机穿孔动梁断裂在线修复技术。
10. In fact, this method that adds explanatory note to online video resembles increasing crosshead for DVD same.
    事实上，这个向在线视频增加注释的方法就像为DVD增加小标题一样。
11. The crankcases are finished and mounted as are the crosshead guides.
    完成的曲轴箱和安装的是十字头指南。
12. The crosshead liners are not rigidly cast, and can thus be replaced.
    十字头衬瓦并未牢固浇铸，因此可进行更换。
13. The crosshead also holds the guide-tip and the wire die.
    十字头的联杆器挤带有指示针和电线模具。
14. Driving lever for crosshead lubricating pump
    十字头润滑油泵传动杆
15. Solution for Overheat Lock Breaking of Crosshead Copper Sleeve in High Pressure Pump by Orthogonal Test Method
    应用正交试验法解决高压泵十字头铜套过热抱死问题
16. Analysis of Small End Bushing and Crosshead Pin Failure of Fresh Hydrogen Compressor Connecting Rod in Hydrocracking Unit
    加氢裂化新氢压缩机连杆小头衬套与十字头销烧损原因分析
17. Crosshead Malfunction Analysis& Maintaining for Reciprocating Compressor
    往复式压缩机十字头故障分析与处理
18. The rugged design of this steam engine is unusual in combining the functions of crosshead guide and cylinder support in a single set of columns.
    崎岖的设计，这蒸汽机是不寻常的结合，职能十字头，引导和支持在缸一套单一的栏目。
19. Failure Analysis of the Compressor Crosshead Bolt
    压缩机十字头销断裂失效分析及预防
20. The vibration signals of reciprocating compressor are basically non-balanced from its configuration and work principle, such as the vibration signals of air-valve, crosshead and piston.
    由压缩机的结构和工作原理可知，压缩机的振动信号基本上都是非平稳信号，如气阀，十字头、活塞等振动信号。
21. This article discusses by way of example the causes of crosshead tilt and the influence on pump operation, and presents a method for calculating the accumulated form-and position-accuracy of the driving parts on the reciprocating plunger pump.
    通过实例论述了十字头倾斜的原因及对柱塞泵工作造成的影响，提出了计算确定往复式柱塞泵传动链形位精度的方法。
22. This paper analyses theoretically the relationship between the crosshead speed and the true strain rate in tensile test, thereby, suggests a testing method realizing the constant strain rate on a common tensile machine for investigating superplasticity of metals.
    本文从理论上分析了拉伸试验中真应变速率与夹头移动速率之间的关系，提出一种在普通拉伸试验机上实现恒应变速率变形进行超塑性研究的方法。
23. The kinematics theory provides a necessary basis for the application and the improvement of crosshead coupling. An analysis of the operation principle of the anti-rotation crosshead coupling mechanism is presented in this paper.
    为滑块联轴器的应用与改进提出了必要的理论依据.本文分析了十字连接环式防自转机构的工作原理；
24. Material selection and bonding pattern of friction layer and body of crosshead on gas on gas compressor
    天然气压缩机十字头摩擦层和本体的选材及结合形式
25. The rupture failures of 3 crosshead pins of a hydrogen compressor are analyzed in respect of compressor train design, installation and variations of operating parameters etc, and corrective measures are recommended.
    对同一台压缩机的三起十字头销断裂故障，从机组本身的设计，压缩机的安装及操作参数的变化等方面加以分析，并提出了对策。
26. The system is tested with a crosshead of high rigidity and the control accuracy achieve ± 2%, the system run stably in a continuous period long enough, and all performance have achieved.
    在提高了系统的结构刚度后，对系统进行了调试，最终系统力加载精度达到了±2%，系统长时间运行稳定，满足了全部设计要求。
27. An analysis of the operation principle of the anti-rotation crosshead coupling mechanism is presented in this paper.
    本文分析了十字连接环式防自转机构的工作原理；
28. Research on Crosshead Bearing Oil Groove in Two-Stroke Engine
    二冲程柴油机十字头轴承油槽优化研究
29. Then constraint mode and free modal analysis is made, calculation of natural frequency and the corresponding crosshead the vibration model, ultimately for the structure of the crosshead judge rationality and evaluation.
    接着做出约束模态和自由模态分析，计算十字头的固有频率及其对应的振型，最终对十字头的结构合理性做出判断和评价，为进一步的结构优化提供有价值的参考。

noun

1. metal block that connects to a piston

2. a heading of a subsection printed within the body of the text

   Synonym:    crossheading