deformations

英 [ˌdiːfɔːˈmeɪʃənz] 美 [ˌdifɔrˈmeɪʃənz]

n.  损形; 变形; 畸形; 破相; 变丑; 残废
deformation的复数



柯林斯词典

  1. V-ERG (使)变形;(使)成畸形;损毁…的外形
    If something deforms a person's body or something else, it causes it to have an unnatural shape. In technical English, you can also say that the second thing deforms.
    1. Bad rheumatoid arthritis deforms limbs...
      严重的类风湿性关节炎会造成四肢变形。
    2. ...the ability of a metal to deform to a new shape without cracking.
      金属重新塑形而不断裂的能力

双语例句

  1. Cables'force, strain of beams and columns and structural deformations are all monitored.
    监测内容包括索力监测、梁柱应变监测以及结构变形监测。
  2. A boundary layer theory of shell buckling, which includes the effects of nonlinear prebuckling deformations, large.
    将壳体屈曲的边界层理论推广到复合材料层合剪切圆柱曲板受侧压作用的情况。
  3. In this paper, the general phenomenon about subsidence and deformations of surface in subway construction is illustrated.
    阐述了城市地铁施工过程中,地表沉陷与变形的一般现象,探讨了地表沉降指数函数计算公式。
  4. The deformations of aerated concrete block in varied initial moisture content and environment were mainly studied.
    研究了不同初始含湿量及在不同环境中的加气混凝土砌块的变形行为。
  5. Instability of asymmetric deformations of an incompressible thermo-hyperelastic spherical shell, subjected to internal pressure, is examined within the framework of finite elasticity.
    应用有限变形弹性理论分析了受内压作用的不可压热超弹性球壳发生非对称变形的不稳定性问题。
  6. We discuss in more detail the application of the coupledmode formalism to scalar waveguide deformations.
    我们将详细讨论耦合模公式对标量波导畸变的应用。
  7. As welding deformations of curved hull block is complex, its is difficult to predict its deformation.
    由于船体曲板焊接变形的复杂性,曲板焊接变形的预测一直为焊接变形预测的一个难点。
  8. Stress, slip, and earthquakes in models of complex single-fault systems incorporating brittle and creep deformations
    具有脆性形变和蠕动变形的复合单断层系模型中的应力、滑动与地震
  9. Dial gauges, gridding lines and digital camera were used to monitor quantitatively and write down qualitatively the deformations and displacements of the models.
    采用百分表、网格线和数码相机,对模型的变形和位移进行监测和记录。
  10. This paper studied the forming mechanisms of the Qiyang arcuate structure through regional tectonic evolutional setting and characteristics of structural deformations.
    结合区域构造演化背景及构造变形特征,对祁阳弧形构造的形成机制进行研究。
  11. Then the door deformations in X and Y directions are analyzed with both theoretical and real gaps.
    分别对车门在理论间隙和实测间隙下的Y向变形、X向变形进行分析。
  12. It would make no difference if the bar deformations were totally inelastic.
    如果杆的变形完全是非弹性变形时这也就没有什么区别了。
  13. The wing withstands vertical bending, chordwise bending and torsional deformations, and the rotor blade is considered to be capable of rigidly withstanding one order flap and lag motions.
    机翼承受垂向弯曲、弦向弯曲和扭转变形,螺旋桨旋翼的桨叶认为是刚性的并承受一阶挥舞和摆振。
  14. The influence of inclined struts on the elastic properties under axial, bending, and shear deformations as well as the impact of axial deformation of horizontal struts were considered comprehensively.
    综合考虑了胞体中斜支柱的轴向、弯曲和剪切变形以及水平支柱的轴向变形的影响,利用最小势能原理得到了材料的弹性性能与各向异性比及相对密度的关系。
  15. The character of a state of stress becomes more evident when we consider the deformations or strains produced.
    如若考虑一下所产生的变形或应变,则应力状态的特性便变得更明显了。
  16. Three dimensional reference deformations and strain facies are new advances in structural geology.
    三维参照变形和应变相是最近构造地质学领域中取得的重要进展。
  17. In this paper, the methods of prediction of upheaval deformations of ground induced by expansive soils and the assessment of site including expansive soil layers are reviewed.
    回顾了预示膨胀土引起的地面上抬变形的方法和含膨胀土层场地的评估。基于软化模型提出了一个地面上抬变形的计算方法及其公式。
  18. Without loss of generality, shear deformations will be neglected.
    不失一般性,忽略不计剪切变形。
  19. If this were not true it would imply that the given bar deformations were not compatible.
    如果不对,说明所给的杆变形是不协调的。
  20. If shear, torsional and axial deformations are to be taken into account, their effects must be added into the expression for internal work.
    在计算中若考虑剪切、扭转及轴向变形,则其影响应该迭加到内虚乘积功的表达式中。
  21. The elastic deformations of concrete largely depend on its composition ( especially the aggregates).
    混凝土的弹性形变很大程度上取决于其成分(尤其是骨料)。
  22. Experimental study on influences of static and cyclic deformations on structural soft clay with stress level
    应力水平对结构性软黏土静力和动力变形特性影响的试验研究
  23. Stress concentrations due to prestressing or other loads and to restraints or imposed deformations shall be considered.
    应考虑预加应力或其它荷载以及限制或施加变形引起的应力集中。
  24. This measurement is independent of the ball screw features ( diameter and lead) and its deformations.
    这种测量方法是独立滚珠丝杠功能(直径和铅)和其变形。
  25. And plane finite element method is used to simulate excavation process and calculate the corresponding deformations.
    应用平面有限元法模拟基坑开挖过程计算出各工况的变形值,与基坑实测变形进行对比分析;
  26. The P-stability for deformations of a straight elastic rod in gripper structure is studied.
    研究抓握结构中弹性棒变形的P-稳定性。
  27. Deformable bearings that t ransmit seismic loads limited by plastic deformations or restricted slippage of bearing components;
    传递受到塑性变形或支座构件受限滑移限制的地震荷载的可变形支座;
  28. Special attention is given to the effect of reinforcement on delayed deformations and on the stability of the embankments and foundations.
    特别研究了土工织布加固对堤坝下软土的滞后变形和稳定性的影响。
  29. Objective The aim of this study is to measure the deformations of crowns and the failure loads of cements.
    目的探讨三种不同黏结剂对固定义齿刚性及黏结层破坏负荷的影响。
  30. In determining force effects and deformations due to creep, dependence on time and changes in compressive stresses shall be taken into account.
    确定因徐变产生的力场效应和变形时,应考虑到时间与压缩应力改变的相关性。