degreasing

英 [ˌdiːˈɡriːsɪŋ] 美 [ˌdiːˈɡriːsɪŋ]

网络  除油; 脱脂; 去油脂处理; 去油; 去脂

计算机化学



双语例句

  1. Metallurgical oxygen system pipe system, should use strict degreasing treatment, needle valve flange J29 Angle Pressure Gauge Valve connection.
    冶金系统中的氧气管路系统中,宜选用经过严格脱脂处理,法兰连接的针型阀。
  2. Electrolysis degreasing, electrolysis pickling and straight line flooding fulling process are adopted while pre-treatment.
    预处理采用电解脱脂、电解酸洗、直线溢流漂洗工艺。
  3. The results indicate that the practical values of this kind of neutral degreaser, including: low cost, environment protecting, and evidential effects of degreasing.
    通过试验,获得了一种新型磷化中性脱脂剂,并探讨了脱脂的最佳工艺条件。
  4. Degrease with the desired degreasing product.
    采用要求的脱脂产品除去油脂。
  5. Analysis of Water Containing Cause in Heating Furnace Because of Degreasing and Disposal
    由脱脂引起的加热炉带水原因的分析与处理
  6. First of all, to deal with some spraying petrol, acetone for degreasing treatment with a file, fine sandpaper, oilstone will fatigue layer and oxide layer removed to expose the metal color.
    首先应对喷涂部分用汽油、丙酮进行除油处理,用锉刀、细砂纸、油石将疲劳层和氧化层除掉,使其露出金属本色。
  7. The Investigation and Research on Handling of Exhaust Gas During Pickling and Degreasing for the Deep Processing of Copper& Copper Alloy
    铜产品深加工过程中酸、碱废气处理研究与探讨
  8. Influence of degreasing, monoglycerides and sucrose fatty acid ester on the formation of resistant starch was studied in this paper.
    本文研究了脱脂、添加单硬脂酸甘油酯和蔗糖脂肪酸酯对抗性淀粉形成的影响。
  9. Spraying at the former, the basic surface cleaning, degreasing and surface roughness, such as spraying pretreatment process are an important process.
    在喷涂前,对基本表面进行清洗、脱脂和表面粗糙化等预处理是喷涂工艺中一个重要工序。
  10. Sever leather degreasing methods are summarized, especialy emulsifying degreasing and enzymatic degreasing are introduced, and the development trends in this procedure is Ezymatic degrease.
    摘要对皮革脱脂方法进行了综述,重点介绍了乳化脱脂和酶法脱脂,认为酶法脱脂是未来的发展趋势。
  11. Degreasing preparation, not having a basis of soap or other organic surface active agents
    脱脂制剂,不以肥皂或其他有机表面活性剂为基料
  12. Degreasing agent ( surface-active preparations)
    脱脂剂(表面活性制剂)
  13. Smoking shall not be allowed near degreasing equipment.
    不得在脱脂设备附近吸烟。
  14. Ineffective processing and disposal of oils, grease, petroleum hydrocarbons, surfactants or solvents used in vehicle washing and degreasing degrade surface water ( AAPA, 1998).
    油污类、油脂、石油的碳氢化合物、表面活性剂或是洗涤船只的溶剂和油污表面去脂水等不当处理和弃置而形成污染。(AAPA,1998年)。
  15. Application of Degreasing Cleaning Technologies in High Profit Strip Steel Industry
    脱脂清洗技术在高附加值带钢生产中的应用
  16. Determination of fat content in pigskin and degreasing water by UV spectrophotometry
    紫外分光光度法测定猪皮及其脱脂废液中油脂含量
  17. By degreasing the skin, modern detergents might lead to infection and inflammation.
    在洗掉皮肤的油脂时候,现代洗涤剂可能也导致了皮肤的感染和发炎。
  18. Component in hydraulic liquids and metal degreasing agents, coupling agent for cutting oils and cleaning agents.
    液压油,金属脱脂剂之组份;润滑油及清洗剂之偶连剂。
  19. Look the Development of Hot-dip Galvanizing of Strip from Correctly Understanding Degreasing Process
    从对脱脂认识看带钢连续热镀锌技术的发展
  20. Degreasing lipoprotein is the carrier of lipid; after it combines with lipid and forms protein, it was transited to the organs and tissues out of the liver, along with blood.
    脱脂脂蛋白是脂类物质的运载体,而与脂类物质结合成蛋白质后,随血液运送到肝外各器官、组织。
  21. Degreasing preparation, of soap or other organic surface active preparations
    肥皂或其他有机表面活性制剂的脱脂制剂
  22. A technology of electroless Ni-P alloy plating including the process of degreasing, zinc-soaking and water washing was studied according to the composition of L6063.
    根据6063铝合金的组成,研究了一种仅包含脱脂、浸锌及水洗等前处理工序的化学镀镍磷合金工艺规范。
  23. A newly developed high efficient degreasing and rust removing solution for pre blackening treatment of high strength bolt is presented.
    根据高强度螺栓发蓝工艺的独特性,研制适用工艺要求的常温除油除锈液,在生产中应用良好。
  24. "Feat" brand FS series reciprocating rotary spray cleaning machine is mainly used for large-scale metal cast iron machine parts, especially after the degreasing process to clean metal chips.
    系列往复式旋转喷淋清洗机主要用于大型金属工件特别是铸铁件机加工后的除油、除屑清洗。
  25. Solvent Degreasing Process of 316L Stainless Steel Injection Molding
    316L不锈钢注射成形溶剂脱脂工艺的研究
  26. For degreasing, use a neutral or weak alkaline degreaser. A strong alkaline degreaser may seriously damage the zinc coated layer and thus reduce corrosion resistance.
    脱脂时,必须使用中性的或者弱碱性的脱脂剂,避免破坏镀锌层,减弱防腐蚀效果;
  27. To allow visitors a clear understanding of the operation of the kitchen, each chef cooks clothes behind and degreasing machines are hanging on the eye-catching numbers.
    为了让客人清楚地了解厨房的操作过程,每位厨师的厨师服后面和除油烟机上都悬挂着醒目的号码。
  28. Comparison of Degreasing Methods for Fatty Red Fish Surimi
    多脂红身鱼鱼糜脱脂方法的对比实验研究
  29. Gas cavity and deformation of the samples can be avoided by degreasing and sintering at low heating rate.
    采用较低的升温速率脱脂和烧结时,能避免产生气泡和变形等缺陷。
  30. The influence of annealing, degreasing, electropolishing on the morphology of porous anodic alumina was investigated.
    对铝的预处理工艺进行了研究,详细探讨了高温退火、除油及电化学抛光等对多孔阳极氧化铝形貌的影响。