enameling
英 [ɪˈnæməlɪŋ]
美 [ɪˈnæməlɪŋ]
网络 珐琅; 上釉; 搪瓷
COCA.46683
双语例句
- The company follows international standards, using advanced V process vacuum precision casting technology, automatic punching, pressing, enameling line and electric furnace for production.
采用国际标准和先进的V法真空铸造技术，以及一流的钢板自动冲压、涂搪、电炉流水线生产。 - Feasibility Study of Improvement and Application of the Annealing Furnace for Enamel Wires before Enameling
漆包线涂漆前退火炉改进和应用的可行性分析 - A detailed analysis was made on the mechanism of enamel melt flow and the affection of the die construction on the enamel melt in the process of enameling round wires.
本文对漆包圆线的涂漆工艺中漆液流动机理，以及模具结构时漆液的影响进行了较详细分析。 - The decoration techniques used by the artisans to apply gemstones and pearls were filigree and enameling.
装修的工匠用宝石，珍珠等应用技术是金银丝和搪瓷。 - Customers can also find supplies for metal enameling for other fast and fun microwave kiln projects.
客户也可以找到用品，金属搪瓷其他快速和乐趣微波窑项目。 - The results are as follows: The microstructure of the experiment steel at room temperature is ferrite, and the grain size grows after enameling.
搪瓷用钢的室温组织为铁素体，涂搪后晶粒有一定程度的长大； - The present status of researching on the enameling pipe and its joining technology are introduced.
介绍了搪瓷管道及喷瓷管道的国内外发展现状和搪瓷管道的连接技术。 - The book ends with an extensive resource of enameling guild and societies, and material and tool suppliers.
这本书的最后一个广泛的资源，搪瓷行业协会和社会的物质和工具供应商。 - Optimization of High Speed Enameling Machine and Process Improve
高速漆包设备的优化改造及工艺攻关 - The hydrogen permeation time of enamel steel was determined; the results matched with the subsequent enameling test.
对钢板的氢渗透时间进行了测定，试验结果与随后的涂搪试验吻合。 - Cold rolled sheets and strips for civil enameling Buckle-driven delamination of metal film/ ceramic substrate systems under thermal loading
GB/T13790-1992日用搪瓷用冷轧薄钢板和钢带金属薄膜&陶瓷基组件热载屈曲失效 - Study on FISH-SCALING resistance of cold rolled steel sheet for enameling
冷轧搪瓷钢板的抗鳞爆性能的研究 - Development of New All-ceramic fiber-lined Bell type 610 kW Electric Resistance Furnace for Enameling
新型搪烧设备610kW全纤维钟罩式电阻炉的研制 - Related parameters may be calculated according to the requirements of the enameling process and the theory of enamel melt flow, by using which right die sizes can be selected.
通过漆包线生产工艺对涂漆的要求及漆液流动理论，可以计算出相关的参数，并合理选择配模尺寸。 - This paper presented the technology for production of extra-low carbon steel in converters in order to meet the requirements of electric steel and enameling plate with carbon content less than 0.01 percent.
本文根据电工钢、搪瓷板等产品含碳量0.01%的要求，介绍了转炉生产极低碳钢的工艺技术。 - Mathematical Model of Heat Transfer in Batch type Radiant-tube Enameling Furnace
辐射管搪烧炉传热数学模型研究 - [ Results] The fresh lung weight and collagen content in spray enameling dust group were higher than those in saline group and obviously lower than those in quartz group.
[结果]熟料粉尘组大鼠的肺鲜重和肺胶原含量高于生理盐水组，但明显低于石英石粉尘组。 - During the production of transposed conductors and assembled conductors, the assembled thickness of the finished enamel rectangular conductor is hard to control due to the accumulation of size errors of the dimension a after enameling.
在换位导线和组合导线生产中，由于涂漆后漆包扁线窄边A的偏差有累积效应，使得组合厚度方向的尺寸难以控制。 - [ Conclusion] Certain amount of spray enameling dust deposited in lung will not induce progressive lung fibrosis but slight foreign body reaction.
[结论]一定量的搪瓷喷花粉尘进入肺内不至引起进行性肺纤维化，而是引起肺内异物反应性改变。 - This paper analyses the influence of air preheated by afterheat on fuel utilization and energy-saving, appraises the feasibility and economy of preheating air by heat exchangers on the muffle furnaces for enameling.
本文就利用余热预热空气，对炉子燃料利用率和节能的影响进行分析，同时对马弗搪烧炉上利用换热器预热空气的可行性和经济性进行了评估。 - Calculation of die arrangement for enameling round wires
漆包圆线涂漆配模计算的探讨 - The effects of batch annealing ( BA) and continuous annealing ( CA) on the formation property and the hydrogen permeability of ultra low carbon enameling sheet were investigated.
就罩式退火和连续退火工艺对含钛超低碳搪瓷钢板成型性能和贮氢性能的影响进行了研究。结果表明，试验材料经连续退火后其成型性能较罩式退火好； - Effect of annealing modes on mechanical properties and hydrogen permeability of Ti-STABILIZED ultra low carbon enameling sheet
退火工艺对含钛超低碳搪瓷钢板成型和贮氢性能的影响 - Analysis of possibility on the enameling with leser in part
激光局部涂烧搪瓷的可行性分析 - The fish scaling resistance of the ultra low carbon steel sheet for enameling has been studied.
研究了冷轧超低碳搪瓷钢板的抗鳞爆性能。 - Property of High Strength Hot Rolled Sheet Steel for Electrostatic Enameling
静电搪瓷用高强度热轧薄钢板的性能 - The application results showed that the various types of enameling steels could meet the production needs of the various enameling ware.
结果表明，宝钢冷轧和热轧搪瓷钢能够满足不同搪瓷制品的生产需要。 - According to the traditional enameling technology, NiO was introduced into enamels by melting addition.
传统的搪瓷工艺，氧化镍是通过熔加的方式引入到搪瓷釉中。 - This method greatly improved the product quality and consistency, and help to save energy, to achieve a good energy saving effect of enameling machine.
这样大大地提高了产品质量和一致性，并有利于节约电能，达到了漆包机节能降耗的良好效果。 - The enameling machine oven temperature control system using fuzzy PID combined with feed-forward compensation algorithm, transferred multi input and multi output into a number of single input single output system.
在漆包机烘炉温度控制系统中采用模糊PID结合前馈补偿算法的模糊解耦控制算法，把多输入多输出的漆包机烘炉改变成为多个单输入单输出系统。