On many modern wooden boats, epoxy coatings will have been used as a base for varnishing. 很多现代的木船将采用环氧涂层作底漆。
Epoxy structures can be similarly identified, provided they are not fully alkylagted. 没有完全烷基化的环氧结构也可以同样地加以鉴识。
The problem of crack initiation in epoxy resin sealing compounds at low temperature is discussed in this paper. 针对如何解决环氧树脂灌封料在低温下易产生开裂这一问题进行了探讨。
The preparation and properties of superfine glass powder/ epoxy resin composites were studied. 研究了玻璃粉/环氧树脂封接复合材料的制备与性能。
Most polymers used in food factories are derivatives of epoxy, polyester and acrylic resins, and rubber latex. 用于食物工厂的多数聚合物是环氧衍生物、聚酯和丙烯酸树脂和胶乳。
In this paper, the copolymer emulsion of acrylates with epoxy resin was prepared and characterized. 研究了环氧改性丙烯酸酯乳液的合成工艺。
Using the silver paste and epoxy resin as die bonding materials, two kinds of power LEDs are made. 分析了功率型LED热阻系统的构成,对采用银浆和环氧胶作为芯片键合材料的功率型LED热阻进行了对比研究。
In this way, epoxy resin is introduced into amino resin to obtain an epoxy-modified amino resin. 这样就可以将环氧树脂引入氨基树脂中,制得环氧改性氨基树脂。
The effects of chemical structure of epoxy resins on the thermal, mechanical, and phase behavior were studied. 研究了固化剂和环氧树脂化学结构的改变对热固网络相行为和热力学性能的影响。
They are cross-linked with themselves, amino, or epoxy resins. 它们可以自交联,或和氨基、环氧树脂进行交联。
Study of Structure and Properties for TiO_2, Silicone Resin and Polyurethane Modified Epoxy Resin 二氧化钛、硅树脂和聚氨酯改性环氧树脂的结构与性能研究
The performance characteristics of vulcanized nano-nitrile rubber modified epoxy resins were briefly described. 简述了纳米硫化丁腈橡胶改性环氧树脂的性能特点;
The sulfonium salt has better curing character to epoxy resin. 该硫鎓盐对环氧树脂具有良好的固化性能。
New process on phosphorus curing agents of epoxy resin are reviewed. 综述了含磷环氧树脂固化剂研究的新进展。
It was found that the adhesive tensile and shear strength of the modified epoxy resin was increased. 实验表明:预聚体的加入明显提高了环氧树脂的粘接剪切强度和拉伸强度。
The influence of acrylate and epoxy resins on the adhesion properties of modified PF resin was studied. 考查了丙烯酸酯单体种类、用量以及环氧树脂用量对改性酚醛树脂粘接性能的影响。
This report covers preliminary results of EPR study of electrical aging in epoxy resin for insulation. 本文讨论了电绝缘用环氧树脂电老化过程的电子顺磁共振研究初步结果。
The method and the condition of separation epoxy ethane from dihydric alcohol are discribed. 介绍了环氧乙烷与二元醇的分离方法和条件。
The thermal properties of cured epoxy resin was evaluated with TMA and TG. 最后采用TMA及TG对固化物的耐热性能进行了评价。
The formulation and process of epoxy primer and polyester polyurethane top finish in this system were introduced. 介绍了该涂料体系的环氧底漆和聚酯聚氨酯面漆的配方和生产工艺。
It is a key monomer in production of polycarbonate plastic and epoxy resins. 它是聚碳酸脂塑料和环氧树脂生产中的关键单体。
A thermosetting epoxy modified acrylic clear top finish for metal electroplated parts is formulated. 介绍了一种金属电镀件罩光用的热固性环氧改性丙烯酸清漆的配制。
Vinyl ester resin was synthesized using bisphenol A type epoxy resin and methylacrylic acid as raw materials. 以双酚A型环氧树脂与甲基丙烯酸为原料合成了乙烯基酯树脂。
Epoxy resin structural adhesive with high-temperature resistant of one component at intermediate temperature; 本文描述了室温固化环氧树脂结构胶粘剂的历史和四个发展阶段。
Such traditional poisonous solutions are replaced with dimethylbenzene to improve the synthesis technology of epoxy acrylic resin. 用新型绿色溶剂取代传统的二甲苯等有毒溶剂,并对环氧丙烯酸树脂的合成工艺进行改进。
Two pack, polyamide cured epoxy resin medium pigmented with zinc chromate. 双组份、具有铬酸锌颜料和聚酰胺固化的环氧树脂介质。
Adhesion of an epoxy resin to glass has been investigated by fracture mechanics test. 以断裂力学方法研究了环氧树脂与玻璃的粘合及添加偶联剂的影响。
Finally, the bond strength of FRP bars to epoxy resin and cement grout is also studied. 同时对纤维塑料筋与水泥装和环氧树脂的粘结强度也进行了探讨。
Nonisocyanate polyurethane ( NIPU) was synthesized by aliphatic primary diamine and cyclocarbonate prepared from epoxy resin E-44. 以环氧树脂E-44为原料合成了环碳酸酯,再与脂肪族伯胺反应合成了非异氰酸酯聚氨酯。
Water-borne acrylic resin was modified by grafted copolymerization of acrylic monomer and epoxy resin. 通过丙烯酸酯类单体与环氧树脂接枝共聚反应,对水性丙烯酸树脂进行改性。