Optimization of cataplasm matrix with face-centered design-response surface method 面心设计&效应面法优化巴布剂基质的研究
On Earth's surface, iron comes in three flavors, standard crystalline forms known to scientists as body-centered cubic, face-centered cubic and hexagonal close-packed. 在地球的表面,铁以三种形式存在,就像身体一样科学家熟知的标准水晶线形态-空间立方体,平面立方体和紧贴一起的六边形。
All colloidal crystals have face-centered cubic structures and the structures are highly ordered. 实验结果表明,所得胶晶都具有面心立方结构,结构有序性相当高。
The simple shear molecular dynamics ( MD) simulations are performed on single-crystal copper blocks to analyze the size and strain rate effects on face-centered cubic ( FCC) metals. 最后根据模拟的结果建立了单晶铜和单晶镍塑性屈服强度的应变率响应模型。
Phase structure, phase transformation and intrinsic magnetic properties of Pt-Co alloys were introduced, Pt-Co alloys form a face-centered cubic phase after solution treated at high temperature, and form an ordered tetragonal phase after annealing. 首先对Pt&Co合金的相结构和相转变以及内禀磁性能作了介绍,合金在高温固溶后形成无序的面心立方相,时效后形成具有永磁性能的四方相。
The least square method can be applied to closed packing hexagonal ( cph), face-centered cubic ( fcc) and body-centered cubic ( bcc) structures. 这些方法适用于密堆六方(cph)、面心立方(fcc)和体心立方(bcc)结构。
The deposit was in face-centered cubic structure without obvious crystal face preferred orientation. Its lattice distanced and lattice parameter a were larger than those of standard copper powder, which indicated that the obtained deposit was still present internal stress and defects. 铜镀层为面心立方结构,没有明显的晶面择优取向现象,镀层结构的晶面间距d和晶胞参数a与标准Cu粉末的相比均较大,说明铜镀层仍存在应力和缺陷。
It is found that the structure of Co-Ni deposits which were single phase solid solution composed by solvent Co and solute Ni is hexagonal close packed ( hcp), while the structure of pure Ni deposits is face-centered cube ( fcc). 结果表明,Co-Ni镀层是具有六方密排结构(hcp)的,以Co为溶剂,Ni溶解在Co中的单相固溶体,而纯Ni镀层为单一的面心立方结构(fcc)。
Orientation stability during uniaxial tension of face-centered cubic ( FCC) metal sheets is predicted using a rate-sensitive crystal plasticity model. 采用速率敏感晶体塑性理论,预测了面心立方金属板材单轴拉伸过程中主要理想取向的稳定性。
It was found that a cobalt-based solid solution with a face-centered cubic crystal structure is presented accompanied by the secondary phase M_7C_3 with a hexagonal crystal structure in the cobalt-based alloy coating. 结果表明,堆焊合金层主要是由面心立方的γ(Co)和六方结构的M7C3构成,并且在钴基固溶体中存在着许多堆垛层错。
There are three peaks in the RSF of Mo_2N, representing one Mo-N and two Mo-Mo shells, which is in good agreement with the face-centered cubic model. 氮化以后,Mo2N样品的径向结构函数中有三个峰,对应于一个Mo-N和两个Mo-Mo配位壳层,与面心立方模型符合得很好。
This paper presents a comparative study of three important Central Composite Designs ( CCDs) which including Central Composite Circumscribed design ( CCC), Central Composite Inscribed design ( CCI) and Central Composite Face-centered design ( CCF) in Response Surface Methodology. 对响应曲面方法中最重要的三类中心复合设计(CCDs)-外切中心复合设计(CCC)、嵌套中心复合设计(CCI)和面心立方设计(CCF)进行了比较研究。
A face-centered cubic lattice. The space distribution law of D lattice point is revealed. D晶格证明是面心立方晶格,并揭示了D格点的空间分布规律。
Erosive wear mechanism and mathematic-physical model of face-centered cubic materials 面心立方材料的冲蚀磨损机理和数学物理模型
The crystal structure of metal Iridium is the face-centered cubic ( FCC) lattice. 金属铱是面心立方结构晶体,原子序数是77,原子重量为192.2。
The results show that the adsorption ( or desorption) process of hydrogen at electrodes of face-centered cubic metal occurs in several stages owing to the characteristics of the crystal surface, and corresponding current peaks appear on the I-η curves. 结果表明,氢在面心立方金属一类的电极上,吸(脱)附过程由于晶面特性而分阶段进行,在I-η曲线上出现几个相应的电流峰。
The binding energy of face-centered cubic lattice and hexagonal lattice for C_ ( 60) crystal was calculated by using the analytic interaction potential, the stability of different lattice was discussed and the reason why C_ ( 60) is general face-centered cubic lattice was explained. 用该表达式计算了C(60)分别为面心立方和六方晶格时晶体的结合能,讨论了不同晶格的稳定性问题,解释了C(60)晶体一般是面心立方的原因。
N-diamond is a new kind of carbon allotrope, which is a metallic form of carbon with face-centered cubic structure. 新金刚石是具有面心立方(fcc)结构的金属性碳,是一种新的碳同素异形体。
X-ary quantitative analysis shows the additions of rare-earth can control to greater extent the martensitic phase change of cobalt phase in alloy, remaining more a-Co with face-centered cubic structure. 经X射线定量分析,稀土添加剂可较大幅度地抑制合金中钴相的马氏体相变,使更多的面心立方结构钴保留下来。
Relations between effective magnetic permeability of body-centered cubic, face-centered cubic and simple cubic lattices of conducting spheres and ratio of magnetic permeability, frequency are studied. 用迭代方法研究了磁流变体中体心立方结构、面心立方结构及简立方结构3种立方格子导电球的有效磁导率与磁导率比、趋肤深度及频率的依赖关系。
Simulation of face-centered cubic lattice's First Brillouin zone with 3-dimensional animation 面心立方晶格第一布里渊区的三维动画模拟
It demonstrated that though various morphology and nanometer size of silver particles vary considerably from different systems, the resulting nanoparticles are spherical, of face-centered structure and well-dispersed. 结果表明,虽然不同体系中所得的银纳米颗粒在形貌和尺寸上存在很大差异,但所得颗粒晶型均为面心立方。
SEM and XRD results showed that Pd were uniform distributed on C/ TiO2 with face-centered cubic lattice, and both the Pd film and Pd wire were composed of Pd nanoparticles with diameter around 20 nm. SEM和XRD分析表明,两种电极上Pd在C/TiO2上均匀分布、Pd具有面心立方结构,Pd膜与Pd线均由粒径约为20nm的Pd颗粒构成。
The quantitative relationship between quasi-particle geometry model and face-centered cubic crystal lattice has been proposed. 并推导出该拟质点几何模型与面心立方晶胞之间的定量数值关系。
Five-fold twinned structures are a class of important members in the family of metallic nanocrystals with face-centered cubic ( fCC) structures, which can anisotropically grow into nanowires when their { 100} facets are protected. 五重孪晶结构是具有面心立方结构的金属纳米晶体中的重要种类,当它们的{100}面被保护起来的时候,它们可以各向异性生长成纳米线。
The XRD curve shows that the silver nano-particle is face-centered cubic structure elemental silver with fine crystallinity. X射线衍射图谱表明纳米银颗粒为面心立方晶系的单质银,而且产品结晶性能良好。
The XRD result shows that the products are silver nanoparticles and the crystals are face-centered cubic. XRD结果表明,产物为纳米银颗粒,晶体结构为面心立方。
XRD results showed that these irregular shapes were typical face-centered cubic structure. XRD的结果表明这些不规则金颗粒的体相结构是典型的面心立方。