facings

英 [ˈfeɪsɪŋz] 美 [ˈfeɪsɪŋz]

n.  (建筑物的)饰面，面层; 领口衬里，袖口贴边，镶边(使衣服耐穿); (不同质地或颜色的)领子(或袖口等)
facing的复数

柯林斯词典

  1. (衣服的)镶边，贴边，里子
    Facing is fabric which is stitched inside the edges of a piece of clothing in order to make them look neat and strengthen them.
    1. (夹克或大衣领口和袖口的)镶边，贴边
      The facings of a garment such as a jacket or coat are the parts around the neck and wrists when they are made of a different fabric from the main part, or are a different colour.
      1. (墙的)贴面，饰面
        A facing on a wall is a layer of stone, concrete, or other material that is spread over its surface in order to make it look attractive.
        点击展开全文

        双语例句

        1. Hard facings on the plug and body seats are not required due to the unique, non-contact turning motion of the Wedgeplug and can be furnished to customer request.
          由于楔塞独特的、无润滑旋转运动，使得阀塞和阀体阀座并不需要坚硬的表面，但是也可以根据用户的要求配置坚硬的表面。
        2. Wedgeplug valves with hard facings are recommended for high temperature corrosive and erosive steam and oil or oil vapor services.
          硬面楔塞阀可用于高温腐蚀或侵蚀蒸汽和油，或者石油蒸汽应用领域。
        3. On special application, Pacific valves can be supplied with special end flange facings other than the raised face or ring joint.
          对于特殊的应用环境，美国太平洋阀门可提供与凸面或环连接不同的特殊端口法兰面。
        4. To secure hand-finished waistbands, tailored buttonhole facings, and bindings use a variation of this hem stitch, picking up the machine stitches instead of the folded edge.
          为了使手工整修的腰带、西装纽洞贴边牢固，卷边针法可变化，挑起机缝线迹而不是折边。
        5. A Felling Machine is a machine that is used mainly for the final sewing of hems, but can also be used for securing neck and armhole facings.
          缲边缝纫机主要是用于底边／下摆的最后缝制，但也可用这种线迹来保护领圈和袖窿的贴边。
        6. Finally, half of the rooms have been left with the structure of its facings on sight.
          最后，一半以上的客房都被留下的结构，其面的视线。
        7. Hard plug and body seat facings available.
          可提供坚硬的阀塞和阀体阀座面。
        8. Back Stitching is used to hold facings to the inside of the garment. heads or tails; top or bottom of a coin
          倒钩针用来把挂面固定到衣片的里面。（丢硬币决定时说的）正面或反面
        9. The repairing technics for damnification of carbon/ epoxy facings-aluminum honeycomb sandwich construction
          碳/环氧面板-铝蜂窝夹层结构件损伤修补工艺
        10. The reform and development of higher education must stick to the three facings.
          高等教育的改革和发展必须坚持三个面向；
        11. A Copper based friction material have been widely applied to clutch and brake facings in transmissions used in machines and industrial vehicles.
          铜基摩擦材料已经在各种机械和工业车辆的离合器和制动器的摩擦衬面中广泛应用。
        12. By study on the stress and strain and failure deformation of part of bituminous concrete facings of domestic and overseas Earth-rock Dams, which were resulted in by load, temperature, creep and different load acting ways, the safety for project can be judged.
          结合国内外部分土石坝沥青混凝土面板，因荷载、温度、蠕变及不同外荷载的作用方式，引起的应力、应变和破坏形态的研究，进而对工程的安全作出判断。
        13. Three Facings is the Essential Education Idea of Higher Education Reform and Development
          三个面向是高等教育改革与发展的重要教育理念
        14. A sandwich type plate with metal facings and felt core fastened by some bolts was studied by using both the test and the finite element analysis.
          本文对由螺栓夹紧的金属表板和毛毡夹心所构成的摩擦阻尼层板进行了试验研究和有限元分析。
        15. The four elements Burger Model was applied to study the creep performance of sandwich honeycomb structure material with wood facings and paper core.
          主要是利用四元件Burger模型对纸木复合蜂窝材料蠕变性能进行研究，其中蠕变实验采用三点弯曲的加载方式。
        16. We only did some experimentation on the B> 0.6H double reinforced earth retaining wall, and observe the distortion of facings, the earth pressure and tensile force of reinforcement.
          在此，我们仅对B>0.6H（B为两墙面间距，H为挡墙高度）条件下的双面加筋土挡墙进行了试验研究，观测其墙面变形、墙面土压力和拉筋拉力的发展变化。
        17. A kind of multifunction composite bearing wall panel with cement shaving board facings and straw board core is designed in this papel.
          本文提出了一种以水泥刨花板为面层、以稻草板为芯层的承重夹层墙板的设计方案。
        18. Taking the Three Facings as the guiding principles and deepening the teaching reform of the Two Courses in the spirit of the National Teachers 'Conference
          以三个面向为指针，按全教会精神深化两课改革
        19. Architectural sandwich panels with thin-walled cold-formed steel facings and rigid foamed insulating core are becoming more and more popular as enclosures for system buildings.
          由冷成型的薄壁钢面和刚性泡沫绝缘蕊子所组成的建筑用夹蕊板条，用来作为多功能建筑隔墙，日益普遍。
        20. Physical and Mechanical Properties of the Packaging Material of Sandwich Construction with Wood Facings and a Paper Honeycomb Core
          纸木复合蜂窝夹心包装材料物理力学性质研究
        21. Reforming Chinese Education According to Deng Xiaoping's "Three Facings"
          按照三个面向改革中国教育
        22. Upholding Three Facings in Ideological and Political Education
          略论思想政治教育要坚持三个面向
        点击展开全文

        考试分类

        行业分类

        柯林斯词典词频分级词汇

        其他分类