ferrule

noun

1. （棍杖、伞顶端的）金属包箍，橡皮包头
   a piece of metal or rubber that covers the end of an umbrella or a stick to protect it

1. (仗、柱或杆顶端的)金属包箍，橡皮包头
   A ferrule is a metal or rubber cap that is fixed onto the end of a stick or post in order to prevent it from splitting or wearing down.

1. The thumb ferrule is set outside the ferrule of index finger on the backplate with steel wires.
   拇指套圈通过钢丝安装在掌背护板的食指套圈外侧；
2. The Development of Fiber Ferrule Concentricity of Automatic Detection and Classification Instrument
   全自动光纤插针同心度检测分类仪的研制
3. Its ferrule followed lightly on the path, squealing at his heels.
   手杖上的金属包头沿着小径轻快地跟随着他，在他的脚后跟吱吱作响。
4. A new complex ferrule fine-blanking technology, combined with the idea of ferrule punching, is introduced in the researching on the pressure rotor and fender ring in this paper.
   传统的精密冲裁工艺一般是指齿圈压板精冲，工艺过程复杂，需要价格昂贵的专用三动压力机，因而在实际生产中的推广应用受到了一定限制。
5. Objective To investigate the stress distribution in various tooth heights of ferrule effect in post crown, and to evaluate thebiomechanical mechanism in post crown.
   目的探讨桩冠修复中不同余留牙体高度及箍结构形式的应力分布特点和箍效应的生物力学机制。
6. A non-contact measuring instrument based on image detection technology is developed to measure the fiber ferrule inner hole geometry parameter.
   为了测量光纤插针内孔的几何参数，研制了一种基于图像检测技术的非接触式光纤插针内孔几何参数测量系统。
7. Ceramic Ferrule Whole-set Equipment Applied Research Based on Project Management
   基于项目管理的陶瓷插芯成套设备的应用研究
8. A sleeve is sleeved at the lower end of the ferrule and arranged between the ferrule and the handle.
   套筒套置在卡套下端，并设置在卡套与手柄之间。
9. Another ring for the difference between the base-level, allowing the ferrule at the base of the non-standard technology of surface markers.
   为区别另一套圈的基准面，允许在该套圈的的非基准面上标工艺标志。
10. The utility model comprises a handle, the head of which is connected with a ferrule by screw.
    本实用新型包括手柄，手柄的头部与卡套螺纹连接。
11. Another ferrule that is used to enclose the wrist and antebrachium is linked to the crossbar of the U-shaped rack through elastic strings.
    一用于腕臂套置的腕臂套圈通过弹力带连接在U形前支架的横杆上。
12. Bearing bore or outside the surface and the ferrule end face connected to a ring surface.
    轴承内孔或外表面与套圈一端面连接的套圈表面。
13. Using the DEFORM software, the simulation model was established and analyzed, the feasibility and the superiority of the closed type cold rolling with pair taper ferrule were justified.
    运用DEFORM软件建立仿真模型进行模拟分析，对圆锥套圈的成对闭式冷辗扩的可行性和优势进行了验证。
14. The complete story of why the center of my ferrule has no black nickel on it would take pages to explain.
    为什么在我的金属箍的中间部分没有黑镍，光这个问题，就得用上好多页纸才能回答清楚。
15. Fiber ferrule inner hole geometry parameter measuring instrument based on image detection technology
    基于图像检测技术的光纤插针内孔几何参数测量仪
16. It is found that the results of finite element method are close to the experiment values because the ferrule deformation and boundary condition are considered.
    研究表明：由于有限元法考虑套圈变形以及边界条件的影响，与实验结果更为接近。
17. Those black rings on my ferrule are black nickel.
    金属箍上的黑圈是黑镍。
18. The tapered legs, each fitted with a brass ferrule caps the bottom, appear elegant.
    琴脚设计呈锥形，最底下套有黄铜金属环，呈现出尊贵气派。
19. The ferrule effect is influenced by elastic modulus of post and core materials.
    箍效应受桩核材料弹性模量的影响。
20. The Effects of Ferrule and Various Material of Post and Core on the Fracture Resistance of Anterior Teeth Residual Root
    不同桩核材料及箍结构对前牙残根抗折力影响的研究
21. Chapter six, Considering the characteristic of grinding work-procedure an embedded SPC system for manufacturing miniature bearing ferrule is studied. This system also includes the control and measurement of geometry dimension, surface roughness and form.
    第六章，在前面研究结果的基础上，针对微型轴承套圈各磨削工序的特点，研究面向微型轴承制造的嵌入式SPC系统，包括几何尺寸、表面粗糙度、以及圆度等参数的检测与控制。
22. This paper mainly introduces a method ( Grinding and polishing) to machining the ferrule roughcast and studies different technologic parameters 'influence on machining quality ( mainly Roughness).
    主要介绍了一种对插针的坯体进行加工的加工方法（研磨抛光），研究不同的工艺参数对内孔加工质量（主要是粗糙度）的影响。
23. Study on the KBS for Bearing Ferrule Grinding Quality Analyse Based on Ontology
    基于本体论的轴承套圈磨削质量分析及其知识库系统的研究
24. This paper analyses and discusses the principle of polishing-machining and characteristics of polishing-techniques according to requirements of polishing ceramic ferrule of optical fiber connector. The author designed a relevant polishing device.
    根据光纤连接器陶瓷插芯微内孔研磨的要求，分析和探讨了研磨加工的机理和工艺特点，设计了相应的研磨实验装置。
25. Three-Dimensional Finite Element Analysis of the Various Forms of Ferrule Effect in Post Crown
    桩冠修复中不同形式箍效应的三维有限元分析
26. In Vitro Study of Effects of Central Incisors Restored with Different Post-core Materials without Ferrule
    无箍效应时不同桩核材料修复上颌中切牙的体外实验
27. Development of the Study of Ferrule Effect
    箍结构作用的研究进展
28. According to stability theory and design method of external pressure cylinder, the experience which can improve technology parameter by the way cutting open clamp ferrule to change effective length of external pressure cylinder is introduced.
    介绍了根据外压容器稳定性理论和设计方法，通过剖分夹套而改变外压圆筒的计算长度，提高其技术参数的经验。
29. Study on Failure of Ferrule type Compression Joints
    卡套连接的失效与研究

noun

1. a metal cap or band placed on a wooden pole to prevent splitting

   Synonym:    collet