Pulp The mixture of fibre, water, bleaches and fillers from which paper is made. 由纤维,水,漂白剂和填料混合而成的造纸材料。
Such fillers, also known as the fourth element of Abrasives. 这种填充剂,也被称为磨具的第四要素。
Effects of different fillers, different plasticizers on the cover properties of light PVC conveyor belts were studied. 研究了不同填充剂、增塑剂对PVC轻型输送带覆盖胶性能的影响。
And the excellent tribological performance of the fillers improved the tribological properties of polyester fabric composites. 由于填料具有优异的摩擦磨损性能,从而使织物增强复合材料的摩擦学性能得到了提高;
A technique for forcing fillers into lumens of reed fibers through pits was studied. 利用高速搅拌的方法研究了通过纹孔将填料加入芦苇纤维细胞腔的技术。
Study on Absorbing-wave Properties of Magnetic Fillers/ Silicone Rubber Composite 磁性填料/硅橡胶吸波复合材料的性能研究
The influence of curatives, reinforcing fillers and anti-heat agent on the heat resistance of MVQ vulcanizate was investigated. 探讨了硫化剂、补强剂和耐热添加剂对甲基乙烯基硅橡胶(MVQ)硫化胶耐热性能的影响。
These fillers detract form the corrosion resistance of the base resin and certainly add no strength. 这些掺入物会降低基础树脂的抗腐蚀性,当然,也无法增大材料的强度。
Study on Tribological and Mechanical Properties of Oil-extended SEBS Blends Modified by Fillers 填料改性充油SEBS/PP共混材料的摩擦学和力学性能研究
The silane effect noted with some of these fillers and pigments in common thermoplastics will be described specifically. 下面将具体叙述观察到的硅烷在常用的热塑料中与几种填料和颜料的反应。
The two parameters provide basis for the theoretical analysis of the removal of Turbidity Using stub tube fillers. 两者为短管填料对浊度去除的理论分析提供了基础。
Fillers of heavy metal are respectively filled in the treatment head, the handle body and the connecting tube. 在治疗头、杆体和连接管中都填充有重金属的填充物。
This product can be used for low-insulation device in the filler, plastic, rubber and glass, steel and other products used as flame-retardant fillers. 本系列产品可用于低压绝缘器件中的填充料、塑料、橡胶和玻璃钢等制品中用作阻燃填料。
This paper discussed grain fineness and superficial activation of inorganic fillers as well as their toughening and strengthening mechanism in modified polypropylene ( PP). 讨论了无机填料微细化和表面活性化以及无机粒子对聚丙烯增韧增强机理,介绍了无机填料对聚丙烯的改性效果与应用。
Study on properties of PTFE composites filled with different organic fillers 不同有机填料填充PTFE复合材料性能的研究
A technique that incorporates fillers in data. 一种将填充符加入数据中的技术。建议使用filler。
The surface treatment tests on fillers indicated that coupling agents can increase the loading of ATO. 填料表面处理实验表明,偶联剂能提高ATO的最大填充量。
Structure and Properties of Nylon 1010 Modified by Using Ethylene-Vinyl Acetate Rubbers and Inorganic Fillers 乙烯&醋酸乙烯酯橡胶和无机填料改性尼龙1010的结构与性能研究
This composition can be incorporated into white inks, printing inks, paints, resist inks, and fillers. 此组合物可与白色油墨,印刷油墨,涂料,保护层油墨,木材填料等混和。
Fillers include modifiers, extenders, plasticizer and low friction additives. 填料包括改性剂,填充剂,增塑剂和低摩擦添加剂。
Its composition is60 to80% asbestos and10 to20% of the rubber, and fillers, curing agents. 它的组分是水力控制阀60~80%的石棉和10~20%的橡胶,以及填充剂、硫化剂等。
Priming is not usually required prior to the use of emulsionbased and powder fillers. 在使用乳液和粉末填充物之前,不要求打底漆。
Study on high performance clutch friction materials based on two NBR composite fillers 基于两种丁腈橡胶复合填料的高性能离合器摩擦材料的研究
Use composite fillers to improve thermal conductivity without reducing bending strength and heat resistance of plates; ②采用复合型填料,在提高板材导热效果的同时不降低板材的弯曲强度和耐热性;
Microfine filler and microscale filler are development direction of technology of inorgonic fillers. 填料微型化、细化是无机填料技术发展方向。
The coalescence mechanism was explored through comparison experiment of oil removal performance of several coalescence fillers. 通过对几种聚结填料除油性能的对比试验,探讨了聚结机理。
An image analysis method has been applied to study the effect of pulp ratio and the kind of fillers on printing quality of ink-jet printing paper. 利用图像分析方法研究浆料配比和填料的种类对喷墨打印纸的打印质量的影响。
Copper conductive adhesive is prepared by using modified resins and mixed resins as cohesive materials and Copper powders as conductive fillers. 以改性树脂和混合树脂为粘料,铜粉为导电性填料,并配以适当添加剂、固化剂制备铜导电胶。
The influences of the curing and pyrolysis process of silicone resin and those of the inert and active fillers were especially discussed. 探讨了硅树脂固化裂解过程、惰性及活性填料对连接性能的影响。
We find relatively large volumes of particulate fillers being used in many composites. 我们发现在许多复合材料中正在采用较多量的粉状填料。