grippers
英
美
网络 抓爪; 气爪; 叼纸牙; 夹持器; 握爪
双语例句
- The projectile loom uses a projectile with grippers to carry the yarn through the shed. A shuttle loom has two cam operated picking mechanisms, one on either side, each of which operates every other weaving cycle.
片梭织机使用一个带有夹子的片梭将纬纱引过梭口。有梭织机具有两个由凸轮控制的投梭机构，分装在织机的两侧。 - Parallel Gripper: Several series of grippers are available.
平行爪：爪几个系列的可用。 - This projectile or gripper shuttle will be referred as a projectile here after although the alternative names of gripper shuttle and gripper still have some currency. The projectile loom uses a projectile with grippers to carry the yarn through the shed.
尽管片梭常用的有几个名称，今后统称为片梭。片梭织机使用一个带有夹子的片梭将纬纱引过梭口。 - The paper analyzes the present problems of several specialized grippers for material tension tester; introduces the improved designs for grippers and the working principles.
摘要分析了材料拉力试验机的几种专业夹持器存在的问题，介绍了夹持器的改进设计及工作原理。 - The packer assembly and skirt pile grippers were selected for the Pinghu jacket due to offshore leveling and grouting requirements.
为了满足海上调平和灌浆的要求，东海平湖油气田平台导管架采用了液压卡桩器和封隔器组合件。 - Quantitative analysis of wrist force of robot grippers is very important for the safe operation of robot.
机器人手爪腕部所受的力的量化对于机器人的安全操作是非常重要的。 - Owing to being able to improve robot grippers, multifingered articulated robot flexible hands are introduced.
多指多关节机器人柔性手因能改善现有夹持器的不足而受关注。 - The WG series,( double guided wedge parallel grippers), achieves synchronous motion with a double acting piston attached via the piston shaft to a double sided wedge.
该工作组系列，（双导杆平行爪），实现了双动通过活塞轴一楔双面同步连接活塞运动。 - The most common way is to turn the sheet on its long dimension, feeding the same edge to the grippers, after backing-up, the sheet is cut in half at its long dimension.
翻转纸张印底面时有两个方式；常用的是沿着长边翻转，印底面时用同一长边作夹牙边。印后，在长边当中切开。 - The TJ Series Grippers provide high grip force in a compact design.
对TJ系列抓手提供高度紧凑的设计握力。 - Compliant grippers offer an economical solution, potentially eliminating the use of a compliant wrist.
标准爪提供了一种经济的解决方案，消除了潜在的标准手腕使用。 - Single or multiple gripper or projectile looms, rapier looms, water jet looms and air jet looms. The projectile loom uses a projectile with grippers to carry the yarn through the shed.
单片梭或多片梭织机，或抛射（片梭）织机；剑杆织机；喷水织机和喷气织机。片梭织机使用一个带有夹子的片梭将纬纱引过梭口。 - Gravel multi-function impact test enginery main standard components are: shot gun components, collision chamber and specimens grippers.
砂砾多功能冲击试验机主要的标准组件有：射枪组件、碰撞室和试件夹持器。 - The optimization results showed that motion impact on paper-transferring grippers minished greatly.
优化结果表明后靠规定位机构的运动、动态性能得到了很大改善，定位过程产生的冲击、噪声大大减小。 - This text has introduced the commonly used 2-finger-parallel grippers of pneumatic double piston structure and wedge system, has analysed the performance characteristic of this class II grippers, question considered while explaining that chooses the grippers.
文章介绍了常用的楔式结构和双气缸结构的二指平动抓手，分析了这二类抓手的性能特点，阐述了选择抓手时要考虑的问题。 - The Structure and Characteristic of Commonly Used 2-finger-parallel Grippers
几种常用的二指平动抓手的结构和特点 - The structures of robot grippers and fixture and the device of screws feeding and screwing are also introduced especially to the gripper for relative pole.
还介绍了机器人手爪和夹具体的结构、螺钉自动供料与拧紧装置的设计及其优点以及传感器的应用。 - This paper systematically sums up the reverse design theory of grippers on-off mechanism, applies it to develop the new product and the desired result has been achieved for.
本文系统总结了咬牙开闭机构的反求设计理论，并将其应用于实际的新产品开发中，取得了预期的设计效果。 - A Data Acquisition, Fusion and Transmission System for Robotic Multi-sensor Grippers
机器人手爪的多传感器数据采集、融合和传输系统 - A Kind of Plane Compliant Grippers
一种平面柔顺型夹持器 - The relationship between joint clearances and motion precision of paper transferring grippers was derived by assuming that the forces on the joints were continuous, the finite difference method was then used to solve the equations.
在假定运动副受力为连续接触模型的条件下，利用差分方程求出了运动副间隙与递纸牙运动精度之间的相互关系。 - The mechanism of grippers on-off is one of the key mechanisms in the printing machine.
咬牙开闭机构是印刷机械的关键机构。 - Analysis of influence of joint clearances on motion precision of paper-transferring grippers
运动副间隙对递纸牙运动规律的影响分析 - Larger joint clearances result in larger displacement errors in the paper transferring grippers.
运动副间隙越大，递纸牙运动轨迹误差就越大； - A networked smart sensor based on an embedded network module for EMR grippers is developed for data sampling, fusion and transmission.
研制了基于嵌入式网络模块的网络化智能传感器，用于舱外自由移动机器人手爪传感器的数据采集和远程监控。 - Space robots are installed sensors in their grippers so as to operate dexterously in an uncertainty environment.
空间机器人为了能够在不确定性的环境中进行灵巧操作，其手爪上配置了多种传感器。 - With the hydraulic drive, the multiple grippers can work in a self-coordination mode, instead of the mode that gripper moving as a whole in traditional stretch forming process.
板材离散夹钳柔性拉形是一种新型的拉形技术，通过全液压驱动技术来实现多个夹钳的柔性自协调工作，取代了传统拉形工艺中夹钳的整体运动模式。 - The thickness of sheet metal has a relative bigger influence on contact force: the thicker the sheet metal is, the more difficult it is for the material to deform, and the bigger the contact force is needed between sheet metal and grippers.
板材的厚度对接触力的影响比较大，板材越厚，变形越不容易，拉形时板材与夹钳之间的接触力就越大。