handwheel

n.  手轮;操纵(驾驶、方向)盘

机械



双语例句

  1. Carefully remove the handwheel and turn indicator sleeve assembly, leaving the valve at its balance set point.
    小心拆卸手轮,并旋转指示器套筒总成,将阀门保留在它的平衡设置点上。
  2. When opening a diaphragm valve, you will feel resistance for approximately one turn, at which point most or all resistance on the handwheel will disappear.
    当开启隔膜阀的时候,在大约一圈中,你会感觉到阻力,到了一圈时,大部分或所有阻力都会消失。
  3. It is the handwheel adjustment of the kerosene stove wick.
    这是煤油炉炉芯的手轮调节处。
  4. Includes floorstand with gate position indicator, handwheel, fittings and extension.
    包括带有闸板指示器的地轴承架,手轮,连接件和加长件。
  5. Reinstall handwheel and secure with retaining bolt.
    重新安装手轮,用固定螺栓加固。
  6. Bevel gear actuators provide vertical mounting of the handwheel or chainwheel, or can be used where space limitations prohibit the use of standard handwheel.
    锥齿轮执行器为手轮或链轮提供垂直安装方式,也能够应用在由于空间限制而无法采用标准配置的手轮的地方。
  7. Single pulling the handwheel through tooth synchronous transmission chain, ensure single-side chuck pull synchronization.
    单面拉网手轮通过齿链条同步传递动力,保证单面夹头拉力同步。
  8. If the operator mounting holes do not line up with the valve flange holes, the stop screw ( s) should be backed off and handwheel turned until holes are aligned.
    假如操作安装的装置孔与阀门法兰孔没有对应上,就要把锁定螺栓退回,扭转手轮式的螺栓孔瞄准为止。
  9. Valves are supplied with a handwheel actuator on all sizes.
    所有通径的阀门都配置手轮执行机构。
  10. The most economical mechanism for tight shutoff is the impactor handwheel.
    要做到紧密关闭,最经济的机械装置就是冲击式手轮。
  11. To order handwheel or chainwheel actuators, add the appropriate order code to the basic valve order code.
    如果要订购手轮或链轮执行器,需要在主阀门订购代码的基础上添加适当的执行器订购代码。
  12. The height of swing arm is regulated by the handwheel at the top of the machine and the cutting stroke is regulated by the timer so as to easily obtain optimal cutting position to improve work efficiency and prolong the service life of die cutter and padding plate.
    摆臂的位置高低由机器上端的手轮调节,冲裁行程由时间计时器调整,这样可以轻易获得最佳裁切位置,提高了工作效率,延长了刀模和垫板的使用寿命。
  13. To order, specify handwheel actuator code, and add extension description as second line information.
    如果要订购加长件,请指定手轮执行器代码,并在第二行加上加长件的描述信息。
  14. Development of Handwheel Upper Switch Control System Based on LIN Bus
    基于LIN总线的转向盘上开关控制系统研制
  15. Starting air master handwheel The initiative rests with us.
    起动空气主操纵手轮主动权掌握在我们手里。
  16. To order, specify description and extension length from center line of valve to handwheel.
    订购时,注明描述信息和从阀门中心线至手轮的加长长度尺寸。
  17. Specify required extension length from centerline of valve to handwheel.
    注明从阀门中心到手轮的所需加长件的长度。
  18. Minimum dimension from centerline of valve to handwheel when ordered without floorstand.
    如果不订购地轴承架,则最小长度尺寸为阀门中心至手轮的长度。
  19. Handwheel should turn freely over full range of travel.
    在整个活动范围内,手轮应该能够旋转自如。
  20. Beneath the handwheel is one set of wrench flats on a nut threaded into the valve body. This is the diaphragm-retaining nut.
    在手轮下面,在一个旋进阀体的螺母上面是一套扳手面。这是横膈膜止动螺母。
  21. Auto disengaged handwheel for safety.
    自动脱离手的安全。
  22. Loosen the scale retaining ring and rotate the turn indicator scale to align with the "0" on the handwheel.
    松开刻度上的固定环,旋转指示器刻度使其对齐手轮上的“0”。
  23. Hammerblow handwheel adapters can be furnished with handwheel or chainwheel construction.
    锤击手轮接合器可以配置在手轮或链轮结构上。
  24. Remove handwheel and turn indicator sleeve by grasping the handwheel and pulling away from the valve body along the stem.
    拆卸手轮,并通过抓住手轮旋转指示器套筒,将其沿着阀杆从阀体内拉出。
  25. When gas sourse happen to trouble, can operate handwheel to open valve.
    当气源发生故障时,可操作手轮使阀门开启。
  26. The extension includes handwheel, non-rising stem, fittings and extensions to allow remote operation normally from above.
    加长件包括手轮,暗杆,连接件和加长件,允许在上方进行远程操作。
  27. The disc position corresponds with the decimal indicator viewed through the handwheel window.
    阀瓣位置与十进制指示器相一致,并可通过手轮上的窗口一览无遗。
  28. Emergency handwheel for direct fuel control
    直接燃油控制用应急操纵手轮
  29. The extension includes fittings and extension pipe with handwheel mounted.
    加长件包括连接件和加长管件,带手轮安装。
  30. Do not attempt to force beyond stops. Handwheel should turn freely over full range of travel.
    手轮停止后,不要再使劲旋转。在整个活动范围内,手轮应该能够旋转自如。

英英释义

noun

  1. control consisting of a wheel whose rim serves as the handle by which a part is operated

    1. a wheel worked by hand