headstock

1. Hardened, precision ground gears in headstock.
   硬化，精密齿轮启闭地面。
2. The pulley is off center'cause the temp headstock was too big and I had to let it hang off the left side.
   滑轮是偏离中心'导致气温启闭太大，我不得不让它挂关闭左侧。
3. The horizontal bed is the foundation member which supports the headstock, tailstock, and carriage.
   卧式床身是基础构件，用来支承床头箱、尾座和拖板。
4. The largest part of the lathe is called the bed on which the headstock and the tailstock are fastened at opposite ends.
   车床的最大的零件称床身，车头和尾架被紧固在相反末端的床身。
5. This design mainly aims at the headstock of the CA6140 machine tool.
   本设计主要针对CA6140机床的主轴箱设计。
6. Headstock piece on media flows and forces open or closed to prevent backflow valve media called a non-return valve.
   启闭件靠介质流动和力量自行开启或关闭，以防止介质倒流的调节阀叫止回阀。
7. The headstock and lathe body are integrated to reduce oil consumption.
   主轴箱和床身液压系统的集成使油耗更少。
8. Material Selection and Heat Treatment of Lathe Headstock Gears
   车床主轴箱齿轮的材料选择及热处理工艺
9. The spindle is encased in the ribbed headstock for maximum heat dissipation.
   主轴是包裹在肋骨底座达到最大散热。
10. The movable part of a lathe that slides along the bed in alignment with the headstock and is locked into position to support the free end of the workpiece.
    车床的可移动的部分，能与主轴箱一同沿床身滑动并锁定在加工件尾端。
11. Reason Causing Blowhole in Headstock Housing of Radial Drilling Machine and its Prevention Optimization of Cam and Rocker Arm of Engine Valve Train
    摇臂钻床主轴箱体气孔产生原因及消除措施发动机配气机构凸轮与摇臂的改进设计
12. The most common form of lathe is the turret lathe it consists of a horizontal bed supporting the headstock, the carriage and the turret.
    最常见的车床形式是以图解方式显示的六角车床，它由一个支承床头箱、拖板和六角刀架的水平床身组成。
13. The performance of the emergency overhaul gate and headstock gears had been normally for many years since the power station put into operation for many years.
    宝鸡峡电站工程已建成并投入使用多年，所有闸门和启闭设备均运行良好。
14. A Design for a New-style Headstock of NC Boring-milling Machine Research on computer numerical control system about new-type ceramic rapid prototyping manufacturing
    一种新型的数控镗铣床主轴系统设计新型陶瓷快速成型装置数控系统的研究
15. The gear box contained in the headstock makes it possible to run the lathe at various speeds.
    在转不同的材料和不同直径的作品，车床，必须以不同的速度运行。
16. A short work may be turned without using the dead center, by simply chucking it properly at the spindle of the headstock.
    一个短的工作在主轴箱主轴上通过适当简单的卡盘无需使用尾架中心也许就能被转动。
17. Force Analysis on Lathe's Headstock Based on ANSYS
    基于ANSYS的车床主轴箱的受力分析
18. The guide way and all gears in the headstock are hardened and precision ground.
    在车头的所有齿轮经过高频淬火及精密研磨。
19. Headstock gears ground with low noise.
    箱齿轮精密磨削，噪音低。
20. Headstock for woodworking machine tools
    机头架，用于木料加工工具机
21. The approach and method of design on project and headstock are introduced in this thesis.
    本文介绍了该组合机床总体方案论证和主轴箱设计步骤和方法。
22. The machines have powerful headstock gear train, high rotating accuracy and smooth running with low noise.
    该机器具有强大的启闭机火车，旋转精度高，噪音低和平稳运行。
23. Multi-objective Optimization of a Winding Machine Headstock
    绕线机床头箱的多目标有限元结构优化
24. Application of Model Analysis in Headstock Optimization Design
    模态分析在主轴箱优化设计中的应用
25. The penstock can be divided into manual type, manual and electric type, electric type according to the headstock.
    由启闭装置的不同型式可分为手动式、电动式、手电动式三种。
26. Clutched headstock for forward and reverse rotating.
    抓住车头前向和反向旋转。
27. Cantalever Vertical Axis Roadheader Bit Distribution Studying and Simulation; Reason Causing Blowhole in Headstock Housing of Radial Drilling Machine and its Prevention
    悬臂式纵轴掘进机截齿分布研究及仿真摇臂钻床主轴箱体气孔产生原因及消除措施
28. The full text mainly includes combines the milling machine the system design and the headstock designs two parts.
    全文主要包括组合铣床的总体设计和主轴箱设计两部分。
29. This let me test a prototype headstock design for a wood turning lathe I'd like to design and build.
    这让我测试的车床我想设计和建造木材启闭原型设计。
30. Headstock all drives lubricated in a single oil-bath, reduce maintenance and servicing.
    所有驱动件均足油浴润滑运转，减少保养工作量及降低噪音。

noun

1. the stationary support in a machine or power tool that supports and drives a revolving part (as a chuck or the spindle on a lathe)