horniness
英
美
网络 角质
双语例句
- Purify skin, balance water and oil, mildly soften aged horniness.
净化肌肤、维持水油平衡、柔和软化老化角质。 - Efficiency: Quickly penetrate into deep skin, thoroughly peel off aged horniness and dirt, make skin clear and refreshing.
产品说明：可迅速渗透至肌肤底层，彻底去除老化角质和污垢，肌肤净透清新。 - Instantly penetrate into and peel off horniness, remove aged and dead cells which cause dull tone and rough texture, and make skin clear.
能迅速渗透角质层使之脱落，清除造成肌肤暗沉粗糙的老化死皮，使肌肤呈现素肌透明感。 - It can effectively relax facial fatigue, eliminate blackheads, dirt and aged horniness, and activate the face in an instant.
有效舒缓面部疲劳，洗去黑头、污垢和老化角质，令面部肌肤瞬间活力四射。 - Paraclete core board can be board, plywood, horniness beaverboard, plastic board, glass.
辩护人芯板可为木板、胶合板、硬质纤维板、塑料板、玻璃等。 - It's that horniness in today's society is out of control.
那就是今天这个社会的硬化已无法控制。 - At a stroke the little woods and copses became a cacophony: a musical celebration of the instantaneous horniness of the turning year.
小树林和灌木丛里一下子充满了各式各样的声音：用音乐庆祝突如其来的季节更迭。 - Efficiency: Promote to peel off dead horniness which contains melanin, boost skin luster, and make skin moist, soft, healthy and clear after use.
功效：促进含有黑色素的死皮脱落、提亮肤色，使用后令皮肤有如新生般的滋润、柔软，肤色变得均匀、健康、有透明感。 - So, in horniness material and weak qualitative data, will you choose which kind of?
那么，在硬质材料和软质材料之中，您将选择哪一种？ - Controlling Method for Dis-brazing of Horniness Alloy Tools
硬质合金刀具的脱焊及其控制方法 - Correlation analysis indicated that there were no significant relationships between sedimentation and head length, spike number, 1000 seed weight and seed plumpness, but positively significant with seed horniness ratio.
对国内外60个品种的分析表明，沉降值与穗长、小穗数、千粒重、子粒饱满度相关性不明显，与子粒角质率呈极显著正相关。 - Polymetric MDI is important material to make polyurethane horniness and semi-horniness foam.
聚合MDI是制造聚氨酯硬质和半硬质泡沫材料的主要原料。 - The results indicated that the microstructure of the composite coatings is with the bedded matrix phase FeAl_2O_4 and the horniness phase Al_2O_3, and the spherical Fe phase is distributed in the bedded coatings;
结果表明：等离子反应合成得到了以层状基体相FeAl2O4与硬质相Al2O3为骨架，球状Fe相弥散分布于基体相上的复合涂层； - The contents of Calcium ( Ca), Phosphorus ( P), Copper ( Cu), Zinc ( Zn), Manganese ( Mn) in hoof horniness and serum of 20 normal and 20 hoof disease milk Cows were investigated by fluorescence and divide light photometer.
本实验采用荧光分光光度计和原子分光光度计法，对20头正常奶牛和20头有蹄病奶牛蹄角质、血清中的钙、磷、铜、锌、铁、锰离子含量进行测定。 - During the process of drilling, sand and gravel strata are often encountered, in which there are a lot of quartzs that are very hard and rubbing with variable shapes and sizes, so steel grains and horniness alloy drilling are not fit for the strata.
在钻探生产中经常遇到砂卵石层，砂卵石层中石英含量高，坚硬，研磨性强，形状各异，大小不一，钢粒钻进和硬质合金钻进都不适用钻进砂卵石层； - The content of Cu in serum and hoof horniness of normal milk cows was lower than hoof disease milk Cows, but the content of Zn in serum of normal higher than of hoof disease Cows.
正常牛蹄角质和血清中铜含量低于病牛，而正常牛蹄角质和血清中锌含量高于病牛。 - The sealing surface of the upper& lower valves of the coal lock hopper, required to deposit horniness alloy metal, the depositing area larger, the depositing metal high hardness, and the most strict requirements in quality.
气化炉的煤锁上、下阀门密封面要求堆焊硬质合金，堆焊面积大，硬度高，质量要求极其严格。 - The leaf dissection showed that with the light intensity increased, leaf thickness, ( horniness) layer thickness, relative thickness of railing tissue added, relative thickness of sponge tissue shrinked and the contents of chlorophyll increased.
叶片解剖表明，随着光照强度的增加，叶厚度增加，角质层、栅栏组织的相对厚度增加，海绵组织的相对厚度减小，叶绿素含量逐渐增加。 - But the horniness fibreboard is different from the magnesite fire-retardant ornamental board in essence.
但是硬质纤维板和菱镁阻燃装饰板有本质不同。 - The combined experiments on granite and concrete blocks are carried out with horniness alloy cutting tools through changing the values of WOB ( Weight on Bit) or impact energy.
通过改变静压、冲击能的大小，应用硬质合金刀具对花岗岩、砂浆块进行了静压-冲击组合破碎试验。 - Study on the Thermal Model and Horniness Segmer Toughening Modification of Epoxy Resin
环氧树脂耐热模型与硬质链段增韧改性的研究 - Sintering is the key processes in horniness alloy production, in which the temperature control is the key factor to guarantee the product quality.
硬质合金烧结是硬质合金生产的关键工序，烧结过程中的温度控制是保证硬质合金生产质量的关键。 - In recent years the domestic market demands for sintering equipment is growing, however, due to foreign companies concealing the key technologies of horniness alloy production equipment and its high price, Chinese cemented carbide industry has not made great progress.
近几年来，国内市场对压力烧结设备的需求在不断增加，而国外公司对关键技术的保密以及过高的设备价位，严重制约了我国硬质合金工业的发展。 - The horniness films can be used at the making machine, automobile industry, spinning industry, geological drilling, dieing industry and aerospace engineering very comprehensive.
硬质薄膜材料可以广泛应用于机械制造、汽车工业、纺织工业、地质钻探、模具工业、航空航天等领域。