inert-gas
英 [ɪˌnɜːt ˈɡæs]
美 [ɪˌnɜːrt ˈɡæs]
网络 惰性气体
双语例句
- Separate inert-gas welded seams in areas and.
分离区域和中使用惰性气体施焊的焊缝。 - Separate inert-gas welded seams in area from the inside using a parting grinder.
使用分离打磨机从内侧分离区域中的惰性气体焊缝。 - TIG: Tungsten-arc Inert-Gas welding
钨极电弧惰性气体保护焊 - Inert-gas shielded arc welding
惰性气体保护电弧焊法 - Given its compact size, the extractor can be positioned directly on the inert-gas welding unit.
因为抽吸器结构小巧，所以可将其直接放置在惰性气体焊接装置上。 - TIG ( tungsten inert-gas) welding processes and A-TIG ( A activating) processes of TC4 titanium alloy with FT-01 activating flux made in BAMTRI were investigated.
采用北京航空制造工程研究所研制的FT-01钛合金活性焊剂进行了A-TIG焊及常规TIG焊焊接TC4钛合金工艺对比试验。 - Marine Equipment: scrubbers for inert-gas generators, submerged equipment.
海洋设备：惰气发生器的洗涤装备，潜水设备； - Air Pollution Control: power plant scrubbers, electrostatic precipitators, waste-heat recovery systems, smelting scrubbers, and scrubbers for industrial boilers and inert-gas generators.
空气污染控制：电厂除尘洗涤装置，电除尘器，余热回收系统，工业锅炉，熔炼洗涤及惰气发生器的洗涤装备； - Variable polarity pulsed metal inert-gas control system
变极性脉冲MIG焊控制系统 - The Study of the Ladle Inert-gas Purging Refining Process
包内吹惰性气体精炼动力学的研究 - Numerical simulation of two-phase gas-droplet flow in combustor generating inert-gas by fuel burning
燃油惰气发生器燃烧室气雾两相流场数值模拟 - High frequency induction hot wire TIG ( tungsten inert-gas) welding is a new technique with high efficiency and welding speed. Using the high frequency induction heating, the temperature and the heating length of the wire can be controlled.
提出了高频感应热丝TIG焊接新方法，焊丝加热温度和深度可控，加热速度快，能适应高速送丝要求。 - Aiming at shortcoming of machining copper band, the method of cladding copper band using metal inert-gas arc brazing was investigated.
针对机械加工制成铜带的不足之处采用MIG钎焊方法堆焊铜带。 - Although the ladle inert-gas purging technique ie widely used in the melt-refining process, yet its theoretical aspects are still not clear.
包内吹惰性气体精炼熔融金属工艺现已广泛应用，但有关的一些理论问题尚有待探讨。 - For the droplet transfer for pulsed metal inert-gas ( MIG) welding, a new waveform control method of waveform with median phase was presented. The effect of median current and median time on the droplet transfer was studied.
针对脉冲MIG焊熔滴过渡过程的控制，提出中值波形控制策略的新工艺方法，详细阐述了中值电流及中值时间对焊接过程熔滴过渡的影响规律。 - This paper introduces the basic principle and application in the international shipbuilding, and compares the traditional metal-inert-gas ( MIG) welding and tungsten inert-gas ( TIG) welding with the novel FSW process, and also analyze the economical prospects of the FSW technology.
介绍搅拌摩擦焊的基本原理和国外的应用状况，与铝合金传统的金属焊条惰性气体焊（MTG）和钨极惰性气体焊（TIG）进行比较，分析搅拌摩擦焊应用的经济性。 - Study on Electron Beam Welding and Tungsten-arc Inert-Gas Welding Techniques of Shell Made of Super-Strength Steel
超高强钢壳体的电子束及手工钨极氩弧焊接技术研究 - Inert-gas tungsten-arc welding for Al-Si-Cu system casting aluminium alloy
Al-Si-Cu系铸造铝合金钨极氩弧焊 - The interaction of inert-gas atoms is described by the Lennard-Jones potential, and the statistical geometric theory of melting is applied to study of the two dimensional solid-liquid phase transition of some inert-gas monolayers physically adsorbed on graphite.
本文以Lennard－Jones势描述惰性原子间的相互作用，将融化的统计几何理论应用到物理吸附在石墨表面的惰性原子单层的固液相变。 - Active flux for austenitic stainless steel tungsten inert-gas welding
奥氏体不锈钢TIG焊用活性剂的研制 - Effect of Longitudinal Intermittent Alternative Magnetic Field on Weld Formation in Tungsten Inert-Gas Arc Welding
外加间歇交变纵向磁场对TIG焊缝成形的影响 - Because of the strong thermal accumulating effect, many kinds of defects were easily produced in aluminum alloy MIG ( metal inert-gas) welding process. The intelligent closed-loop control system of the vision-based aluminum alloy MIG welding pool width was developed to solve this problem.
针对铝合金在焊接过程中热积累作用强、恒参数焊接时容易产生各种缺陷的问题，设计了基于视觉传感的熔宽闭环智能控制系统。 - Single chip computer controlled pulsed metal inert-gas arc weldingmachine
新型单片机控制熔化极脉冲氩弧焊机 - Results 12 eyes underwent vitrectomy with inert-gas tamponade, 8 ( 67.67%) eyes achieved retinal reattachment primarily.
结果玻璃体切除联合玻璃体腔注气术12眼，1次手术视网膜复位8眼（66.67%）； - The effects of single-wire unitary pulsed metal inert-gas ( MIG), synergic pulsed MIG and double-wires tandem MIG welding processes on the microstructures and properties of high strength Al-Cu alloy welds were investigated.
研究了单丝单脉冲、单丝复合脉冲和双丝TandemMIG焊对高强AlCu合金焊缝组织及性能的影响。 - There are some hybrid welding processes such as laser-metal inert-gas welding, laser-tungsten inert-gas welding, laser assisted friction stir welding and dual laser beam welding, which can be used for joining aluminum, magnesium and their alloy.
列举了激光-MIG焊，激光-TIG焊，激光辅助搅拌摩擦焊，双激光束焊等多种激光复合热源在铝、镁及其合金连接上的应用，对相关复合热源的加工原理做了简要的分析。