intercooler
英
美
n. 中间冷却器；冷热气自动调节机
COCA.44601
双语例句
- Study of Heat Pipe Application on Intercooler for Internal Combustion Engines
热管在增压内燃机中冷器上的应用研究 - The Study of Vehicle Diesel Sequential Supercharging System and Intercooler Flow Field Computation
车用柴油机相继增压系统研究及中冷器流场计算 - Development and Application of EPDM Rubber Tubes for Intercooler
改性EPDM中冷器出气胶管的开发及应用 - Air-cooler is an ordinary heat exchange set. Type Selection of Radiator, Intercooler and Fan and Its Checking Calculation
中冷器（气冷却器）一种常用热交换装置。散热器、中冷器和风扇的选型校核计算 - At last, the more suitable structure of intercooler to the step utilization of the energy is designed.
找到了适合能源梯级利用的中冷器的结构形式。 - The modification of a compressor intercooler was conducted by replacing the straight tubes of a shell tube heat exchanger with a new type of stainless steel corrugated tubes.
采用新型不锈钢波纹管代替壳管式换热器中的直管，对压缩机中间冷却器进行了改造，并进行了实际运行测试和比较分析。 - The argon arc welding process after replacement of intercooler cooling section was presented. The welding feature and weldability were analyzed.
介绍了中冷器抽换散热单节的氩弧焊接工艺，分析了中冷器抽换散热单节的焊接特点以及焊接性。 - The work of developing the test-system of intercooler ′ s performance will be introduced in this paper.
主要介绍中冷器性能测试系统的开发工作。 - The characteristics of diesel engine intercooler rubber tubes are introduced, and the performances of silicone rubber and EPDM rubber are compared in the paper.
介绍了汽车柴油发动机中冷器出气胶管的特点，比较了硅橡胶与三元乙丙橡胶（EPDM）的性能特征。 - The influence of the combustion system parameters on the combustion process of the turbocharged diesel/ CNG dual fuel engine with intercooler has been investigated, the combustion system parameters include CNG ratio, the pilot fuel injection time, the air temperature after the intercooler and so on.
对天然气替代率、引燃柴油喷油时刻和中冷后进气温度等燃烧系统参数对增压中冷柴油天然气双燃料发动机燃烧特性的影响进行了实验研究。 - Take compressor's intercooler for example, main reasons of failure is analyzed.
以压缩机管壳式冷却器为例，分析了其失效原因。 - In this thesis, the research process of raising performance and reducing the emission of 6M turbocharged intercooler diesel engine by using four valves technology was introduced.
本文主要介绍了6M增压中冷柴油机改为四气门后提高功率、降低排放的研究过程。 - The correcting methods of cooling area and the temperature of supercharging air before intercooler are also given.
在此基础上，还给出了校核散热面积和增压空气出口温度的方法，使中冷器的校核计算简单、准确。 - The design of intercooler configuration for diesel engine
柴油机中冷器结构与设计 - Selection of intercooler;
中冷器的选取； - Based on analysis of structural style and cooling mode of intercooler for diesel locomotive, a new and reasonable design and calculation method of intercooler for diesel locomotive is selected.
在分析了机车中冷器的结构形式和冷却方式的基础上，选用了一种新颖合理的内燃机车中冷器设计计算方法。 - Based on the development for the cooling elements in air-air intercooler, the proper cooling elements are selected optimally.
在对空空中冷器用冷却元件进行试验研究的基础上，优选出适合机车柴油机使用的空空中冷器冷却元件。 - This paper proposes a new intercooler core model design and analyses the result of devaporation test taking account of the status of intercooler. The result shows that the new core can improve heat-transfer capability effectively and provides basis for developing the new structure of intercooler.
根据中冷器现状，提出了新型中冷器板芯模型，并进行了蒸汽凝结试验分析，结果表明新型中冷器板芯能有效提高传热能力，为进一步研究中冷器新结构提供了依据。 - Study of the cleaning method for intercooler and radiator
对中冷器、散热器清洗方法的探讨 - Experimental study on heat transfer and fluid flow in an intercooler
中冷器内流动与传热的试验研究 - The characteristics of cold rectifying fin tubular intercooler are introduced.
介绍了冷轧翅片管式中冷器的特点，导出了该种形式的中冷器冷却元件几何参数的计算公式； - Design and test research of new type intercooler core
新型中冷器板芯设计及试验研究 - Thermal load calculation and design of intercooler for diesel locomotive
内燃机车中冷器热负荷计算与设计 - We also design a simple intercooler. Finally, a diesel engine test is benched, and we compare the performance of the prototype experiment and the prototype machine.
针对进气温度升高的特点设计了一款简单的中冷器。最后，建立了柴油机试验台架，进行了原机，样机的性能对比实验。 - In order to improve system performances, we introduce the splitter and intercooler on the basis of traditional technology.
在传统液体除湿工艺基础上通过引入分流器和中间冷却器改进系统性能。 - Design requirements of intercooler system are put forward, and gas turbine calculation procedure of assisting optimal design is developed.
提出了间冷系统的设计要求，开发了辅助燃气轮机间冷系统优化设计的计算程序。 - Based on the traditional design theory, the design method and procedure of marine gas turbine intercooler system are established.
在传统的设计理论基础上，确立了燃气轮机间冷系统的热力计算方法和步骤，利用此方法对间冷系统进行优化设计。 - Based on the modularization theory a marine diesel engine model is established by using MATLAB/ SIMULINK. The model describes working process of diesel engine, intake and exhaust systems, intercooler, turbocharger, governor, torque output and multi-cylinder model.
本文依据模块化思想在MATLAB/SIMULINK中建立了柴油机容积法模型，主要对柴油机气缸工作过程、进排气系统、中冷器、涡轮增压器、调速机构、输出扭矩和多缸模型进行模型描述。 - On this basis, the structure design of marine gas turbine intercooler has been carried out in this paper.
在此基础上，本文借鉴了成熟机型WR-21燃气轮机间冷器的设计经验，对间冷器进行了初步的结构设计。