interelectrode
英
美
adj. （电）极间的
双语例句
- Fuzzy Controlling Interelectrode Gap Method of Electrochemical Machining ( ECM) Based on 6-D Forces and Machining Current
六维力/加工电流模糊控制电解加工间隙的方法 - The analysis of this model shows that if the interelectrode gap length in the CCM elements decreases, the rate of the charge multiplication increases.
通过对该模型的分析表明：CCM单元内电极间的间隙越小，电荷倍增率越大。 - On-line measuring interelectrode gap of processing blade based on information fusion
基于信息融合的叶片加工间隙在线检测方法 - The interelectrode dielectric adopts the polypropylene film with surface coarsening which is easy to impregnate so as to enhance the reliability of high-capacity capacitor.
极间介质为易于浸渍的表面粗化聚丙薄膜，特别提高了大容量电容器的可靠性。 - Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves
GB/T7274-1987电子管极间电容测试方法 - Experimental Research of Influence on Interelectrode Resistance of P-type Silicon with Different Conduction Mode
进电方式对P型硅极间电阻影响的试验研究 - There isn ′ t any effective method for in-process measuring the interelectrode gap of ECM.
目前，在电解加工中还没有有效的加工间隙在线检测方法[1]。 - Effects of Interelectrode and Stray Capacitances on a MOSFET Source Follower at High Frequencies
高频下寄生极间电容对MOSFET源极跟随器的影响 - The Relationship between Emission Current and Interelectrode Voltage in Thermoelectron Emission
论热电子发射中发射电流与两极间电压之间的关系 - Teaching Study of the Influence in High Frequency Characteristic of the Transistor Interelectrode Capacitance to Amplifier Circuit
三极管极间电容对放大电路高频特性影响的教学探讨 - Experimental research of on-line monitoring interelectrode gap of electrochemical machining based on 6D forces
基于六维力电解加工间隙在线检测试验研究 - On characteristics of flow-field and interelectrode gap in pulse electrochemical finishing
周期叉指阵中的指间多次反射问题脉冲电化学光整加工的流场及间隙特性 - Interelectrode clearance is one of the most important parameter of it, keeping minimal clearance while machining will improve the part's surface gloss and size accuracy.
极间间隙是对脉冲电化学光整加工具有重要影响的工艺参数，保持极小的极间间隙加工，可以提高工件的表面光泽度以及加工的尺寸精度。 - At the optimum conditions of electrolytic voltage 8 V, electrolytic reaction time 30 40 min, interelectrode distance 2 cm, pH 8 10 and conductivity 0.620 ms/ cm, the removal rate of anionic surfactant is more than 96%.
在电解电压为8V、电解时间为30~40min、电极间距离为2cm、废水pH为8~10、废水电导率为0.620ms/cm的条件下，阴离子表面活性剂的电解处理去除率可达96%以上。 - In this work, the field distribution of electrodes is analysed to determine the maximum overlap integral affected by the parameters of electrode width, interelectrode gap and optical mode size etc.
本文利用集成电光调制器电极电场的分布规律，研究了各种结构中影响电光重叠因子的诸参量之间的关系； - Electrochemical Machining ( ECM) Interelectrode Gap Measurement Based on Information Fusion
基于信息融合的电解加工间隙检测 - At the optimal conditions of voltaic density 30 mA/ cm~ 2, electrolyse time 80 min, interelectrode distance 2 cm, pH 7~ 8 and conductivity 1100 μ s/ cm, the removal rate of phenol can be more than 97%.
在电流密度为30mA/cm2，电解时间为80min，电极间距离为2cm，废水pH值在7~8之间，废水电导率为1100μs/cm的处理条件下，苯酚的电解处理去除率可达97%以上。 - A complex impedance theory for surface acoustic wave interelectrode multireflection effects
声表面波指间多次反射效应的复阻抗理论 - Measurement and Control of Interelectrode Gap during Electrochemical Machining ( ECM) Based on Wavelet Transform and Fuzzy Control
基于小波变换、模糊控制的电解加工间隙检测与控制 - Measure and control of interelectrode gap of electrochemical machining based on force signal and fuzzy control
基于力信号和智能控制的电解加工间隙检测与控制 - The force signal on the surface of the cathode, which is led by the electrolyte, is gathered in the test and treated by wavelet transform to decrease noise and get a smooth curve of force signal which tends to ascend as the interelectrode gap decreases.
采集真实电解加工过程中阴极表面上的力信号，利用小波变换对采集的信号进行降噪处理，得到一条随着间隙减小而光滑增大的力信号趋势曲线。 - Triode can be designed by film edge field emission cathode in which the cathode, gate and anode are all in a planar structure, so its interelectrode capacity is very low. It is suitable for the application of high speed and high frequency circuit.
利用薄膜边缘场发射阴极设计的三极管，阴极、栅极和阳极是平面结构，因此极间电容小，适合应用于高速和高频电路。 - Improvement of Crack Resistance of Al_2O_3 Base Interelectrode Insulator Materials for MHD Power Generation
燃煤MHD发电Al2O3基电极间绝缘材料抗裂性的改善 - Microcomputer Process System of Interelectrode Voltage Dynamic Parameters for Resistance Spot Welding
电阻点焊电极间电压动态参数微计算机处理系统 - This relationship can be used to measure the interelectrode gap indirectly.
结果发现：随着间隙减小力和加工电流都增大，可以据此间接实现间隙的测量。 - The ignition characteristics in terms of spatial-temporal evolution of discharge interelectrode structure and optical emission intensity are investigated by time resolved imaging.
通过时间分辨成像研究起辉阶段在放电电极极间间隙的时空演变和发射谱线强度的特征。 - By the use of the LC peaking technology and interelectrode series LC peaking technology, the circuit has obtained good gain flatness in the whole frequency band.
通过采用电感负载峰值技术和极间串联电感峰值技术，在整个频带内获得了良好的增益平坦度。 - Energy consumption can be reduced through narrowing interelectrode distance, decreasing current and increasing initial dye concentration.
缩小极板间距、减小操作电流和提高染料初始浓度可降低能耗。 - The relationship between the dielectric permittivity of flame and the internal interelectrode capacitance is verified by demarcation experiment.
利用标定实验验证了火焰介电常数与火焰温度的关系。