intermeshing

英 [ˌɪntəˈmeʃɪŋ] 美 [ˌɪntərˈmeʃɪŋ]

网络  交叉式; 啮合与否; 相互啮合; 啮合

双语例句

  1. Knitting is defined to be the formation of fabric by the intermeshing of loops of yarn.
    针织被定义为由线圈相互穿套形成织物的过程。
  2. Forecast and Experimental Study of Melt Filled Length of Screw Assembled Field in An Intermeshing Co-rotating Twin Screw Extruder
    啮合同向双螺杆挤出机组合流道的熔体充满长度预测与实验研究
  3. The jaws are strong with a full complement of evenly set and properly intermeshing teeth.
    结实而丰满，牙齿位置匀称且相互啮合的很好。
  4. The effects of screw speed, salt ( 0~ 3%) and sugar ( 0~ 8%) contents on the extrusion of rice flour using a corotating, fully intermeshing twin-screw extruder were studied.
    研究了在使用旋转型全隔行式双螺杆挤压机时，螺杆速度、盐（0~3%）和糖（0~8%）对米粉挤压的影响。
  5. This is helpful for the design and use of a closely intermeshing co-rotating twin-screw extruder.
    这些关系对啮合同向旋转双螺杆挤出机的设计和操作有指导作用。
  6. A Research on Pressure Distribution in the Channel of Co-rotating Intermeshing Twin Screw Extruder
    全啮合同向旋转双螺杆挤出机螺槽中压力分布的研究
  7. Two methods were applied to fit surfaces of the tetrahedral gap of an intermeshing co-rotating twin-screw extruder. The surfaces are irregular border's parameter domain.
    文中利用了两种对非规则边界参数区域进行拟合的方法，对同向双螺杆挤出机四面体间隙进行了拟合，并建立了一种曲面拟合误差测量的新方法；
  8. New Method of Designing Unconventional Screw Elements of the Intermeshing Twin-Screw Extruder
    啮合型双螺杆挤出机非常规螺纹元件设计新方法
  9. The geometry of intermeshing co-rotating twin-screw, especially the shape and volume of the tetrahedral gap of the equipment were studied throughly and the mathematical model of the volume of the gap was proposed.
    对啮合同向旋转双螺杆几何学和无间隙全啮合双螺杆四面体间隙的几何形状与体积做了详细的探讨，并建立了四面体间隙的数学模型。
  10. The paper reports a new kind of feeding method using intermeshing helical roll for cold feeding rubber extruders.
    提供了一种冷喂料橡胶挤出机新型螺旋啮合辊喂料方法。
  11. In this paper, geometrical principle of fully intermeshing counter rotating twin screw extruder are analyzed.
    本文对异向全啮合双螺杆挤出机的几何原理进行了研究，给出了端面曲线，螺杆形状，加工刀型曲线的数学模型；
  12. Screw configuration of different functional sections and modular design of whole screw in intermeshing co rotating twin screw extrusion are introduced.
    介绍了啮合同向双螺杆挤出过程中不同功能段的螺杆构型和整根螺杆的组合设计。
  13. Study on tetrahedral gap of intermeshing co-rotating twin-screw extruder
    啮合同向旋转双螺杆挤出机四面体间隙的研究
  14. The results showed large pressure gradient and velocity gradient of the material in the four intermeshing regions. The mixing efficiency of four-screw extruder was better than that of twin screw extruder.
    计算结果表明：四螺杆的四个啮合区具有较大的压力梯度、速度梯度，其混合性能明显好于双螺杆挤出机。
  15. The disposal of the intermeshing region effect is one of difficulties in the theory study on co rotating twin screw extrusion.
    对啮合区的处理是同向双螺杆挤出理论研究中的难点之一。
  16. This thesis concentrates on simulation of Non-Newtonian isothermal flow in kneading block in closely intermeshing co-rotating twin screw extruders.
    本文主要就全啮合同向双螺杆挤出机捏合块流道中熔体全充满区的流动进行了全三维非牛顿等温模拟。
  17. Relation between operating condition and Intermeshing Twin Screw Extruder
    操作条件对双螺杆挤出机性能的影响及控制
  18. Several Problems on Design of Intermeshing Co& rotating Twin Screw Extruders
    啮合型同向双螺杆挤出机设计中的几个问题
  19. The new progress has been made on the studies of extrusion mechanism in intermeshing co-rotating twin screw extruders and the existing problems in the studies are analyzed. What to be done in the further is also presented.
    论述了啮合型同向旋转双螺杆挤出机挤出机理研究的最新进展，分析了存在的问题和难点，并提出研究发展的方向。
  20. Numerical Analysis and Experimental Investigation of Mixing Effect in Kneading Disc Elements of Co-rotating Intermeshing Twin Screw Extruder
    啮合同向双螺杆捏合块元件混合效果的数值模拟分析与实验研究
  21. Effect of Staggered Angles on Extrusion Characteristic in twin screw non-intermeshing extruder
    双螺杆非啮合螺纹元件错列角对挤出特性的影响
  22. Disposal of the intermeshing region effect on melting procedure in co-rotating twin-screw extrusion theory study
    同向双螺杆挤出熔融理论研究中对啮合区的处理
  23. Computer simulation of extrusion process of Intermeshing Co-Rotating Twin Screw Extruders
    同向啮合双螺杆挤出机挤出过程的计算机模拟
  24. According to the intermeshing mechanism of counter-rotating twin-screw, and using advanced solid modeling the author discussed three dimension solid modeling of counter-rotating parallel twin-screw and conical twin-screw for guidance of selection and design of screw geometry parameters.
    作者根据异向旋转双螺杆啮合原理，应用高级实体造型技术，讨论了异向旋转平行、锥形双螺杆三维实体造型，以指导异向旋转双螺杆几何参数的选择和设计。
  25. PPO/ PA66alloy were prepared using melting-blending reactive extrusion in an intermeshing co-rotating twin screw extruder in this paper. The influence of formula and screw configuration on properties of alloy was studied.
    本课题采用啮合同向双螺杆挤出机，通过熔融共混反应挤出的方法制备PPO/PA66合金，研究了配方和螺杆构型两大要素对合金性能的影响。
  26. Polypropylene ( PP) and Poly ( ethylene-1-octene) ( POE) blends were prepared in an intermeshing co-rotating twin-screw extruder.
    本文采用啮合同向双螺杆挤出机制备了不同组成的聚丙烯/乙烯-1-辛烯共聚物（PP/POE）共混体系。
  27. Driven by the demand of market, the intermeshing co-rotating twin screw extrusion granulator ( ICTSEG) towards the high-output, high-efficiency, large-scale and low-power direction.
    在市场需求的推动下，啮合同向双螺杆挤压造粒机向高产量、高效率、大型化和低能耗方向发展。
  28. The intermeshing co-rotating twin screw extruder ( ICTSE) has been more widely used in the plastics processing and modification, and it has became an important core equipment of plastic extrusion granulation.
    啮合同向双螺杆挤出机在塑料加工与改性方面得到了越来越广泛的应用，已成为塑料挤压造粒的重要核心装备。
  29. According to the geometry of closely intermeshing co-rotating twin screws, an equivalent reactor model was established in this study.
    本文根据紧密啮合同向旋转双螺杆的几何学，建立了轴对称的螺杆反应器的等效数学模型。
  30. Using intermeshing co-rotating twin-screw provides higher shear rate and grain refinement.
    采用同向旋转螺杆，以提供更大的剪切速率，可以更好的细化晶粒。
点击展开全文

考试分类

行业分类

柯林斯词典词频分级词汇

其他分类