ladles

英 [ˈleɪdlz] 美 [ˈleɪdlz]

n.  长柄勺; 汤勺
v.  (用大勺)舀,盛
ladle的第三人称单数和复数



柯林斯词典

  1. 长柄勺
    A ladle is a large, round, deep spoon with a long handle, used for serving soup, stew, or sauce.
    1. VERB (尤指用长柄勺)舀,盛
      If you ladle food such as soup or stew, you serve it, especially with a ladle.
      1. Barry held the bowls while Liz ladled soup into them...
        巴里负责端着碗,由利兹向碗里盛汤。
      2. Mrs King went to the big black stove and ladled out steaming soup.
        金太太走到黑色的大炉子前,舀出热气腾腾的汤来。

    双语例句

    1. When we got a quite surface, we bought two ladles from indigenes since the water could easily splash into the boat.
      我们到达平缓水面时,因船太易溅进水了,便从当地人买了两个舀子。
    2. The settlements of Sergiev Posad had many workshops of craftsmen who excelled in making crosses, ladles, silversmiths and other artistic objects.
      谢尔盖耶夫颇沙德住居区有许多的手工艺作坊,手工匠们擅长制作十字架、长柄勺、银器和其他的艺术品。
    3. Lily ladles little letty's lentil soup.
      莉莉替小历蒂盛小扁豆汤。
    4. He ladles the soup into the plate.
      他用勺把汤盛进盘子中。
    5. Barrel and bottom of large size ladles and refining ladles.
      大型钢包和精炼钢包的包壁和包底。
    6. Common gourd ladles in daily life are two gourd ladles of the leakage gourd ladle with holes and the gourd ladle with no holes.
      日常生活中常用的瓢有两种,一种是有孔漏瓢,另一种是无孔瓢。
    7. The captioned bricks are very common bricks for the body and bottoms of ladles.
      镁碳砖是一种极普通的耐火砖,主要用于钢厂钢包的炉身、炉底。
    8. Considering deficiencies of traditional powder injection in ladle, slot plug with conical fluidized bed used for bottom powder injection in ladles was developed.
      针对传统钢包喷粉工艺的不足,开发了从钢包底部喷吹的喷粉型狭缝式透气砖。
    9. The slag from the furnace is tapped from the slag notch, and it flows through runner into slag ladles or slag yard.
      (熔炉等内的)熔渣,渣块,煤渣.高炉熔渣从渣口放出,顺着流渣沟流进渣罐,或流入渣?
    10. Development and Application of the Carbon-free Unfired Brick for Ladles
      钢包用无碳不烧衬砖的开发和应用
    11. Slab caster systems through the analysis of continuous metal casting, a secondary development of crystallizer, crystallizer's vibration devices, ladles, pie slice roller, spinning roller mechanical equipment models, and achieve environmental 3D models for virtual scenes.
      通过对板坯连铸机系统进行分析,二次开发建立结晶器、结晶器振动装置、大包、扇形段辊道、旋转辊道等机械设备模型,实现场景的虚拟环境三维模型库。
    12. Study on carbon-free unfired brick for ladles
      钢包用无碳不烧砖的研制
    13. In this paper, the conditions in service of rammed monolithic lining with alumina-magnesite refractory in 200t ladles of oxygen converters are described, their influence on steel quality is discussed and measures for prolonging the life of rammed lining are also provided.
      本文介绍了氧气转炉200t盛钢桶采用铝镁质材料机械捣打整体内衬的使用情况,探讨铝镁质捣打桶衬对钢质量的影响,提出提高捣打桶衬寿命的技术措施。
    14. Finally, the prediction of the growth and separation behaviors of alumina inclusions in molten steel in refining ladles has been illustrated as an application example of this general coupling model.
      最后作为这个通用耦合模型的应用,本文演示了精炼钢包内钢水中Al2O3夹杂物的增长和分离动力学。
    15. The design concept and numerical method of the software TPS-3D ( Transport Processes Simulation with Three Dimensions) developed by the authors for simulating the transport processes in metallurgical reactors is described. In addition, its application to the argon-stirred ladles is also presented.
      介绍了一个自行开发,用于冶金反应器过程模拟的三维计算软件TPS-3D的基本设计原理、构成和求解技术及在吹氩精炼钢包中的应用情况。
    16. An introduction was made to the varieties of Tundish ladles, their features, design and main dimensions calculation.
      介绍盖包的类型、特点、设计及主要尺寸的计算。
    17. Measurement and calculation of liquid steel flow velocities in argon-stirred ladles
      吹氩钢包内钢液流速的实际测定和理论计算
    18. The recovery rate of deoxidizer to rimming steel in the ladles and the final O_2-contents were obtained respectively.
      沸腾钢脱氧剂回收率与终点氧的关系。还提出了用定氧结果估算钢液中含碳量。
    19. The Production and Application of Medium MgO-C Bricks for Slag Lining of Refining Ladles
      精炼钢包渣线用中档镁碳砖的生产及使用
    20. A Study of the Slag Detection System for Continuous Casting with 300t Ladles
      300吨连铸钢包下渣检测系统的研制
    21. In order to achieve the goal of refining liquid steel and smelting clean steel, using of no-carbon refractory for ladles is very important in iron and steel smelting processes.
      在钢铁冶炼工艺中,为了实现钢水精炼和冶炼洁净钢的目的,在钢包上使用无碳耐火材料成为必不可少的重要手段。
    22. Design and Practice of reused molds of big slag ladles
      大型集渣包复用铸型的设计与实践
    23. A safety purge plug for steel ladles
      钢包用安全透气塞
    24. After study and analysis on the causes of tundish slag dam damage, the structure and its position in the tundish are redesigned, the water molding and production test has shown that the new dam can guarantee 10 ladles in one casting sequence.
      通过中间包挡渣堰损毁方式分析研究,重新对挡渣的结构与位置进行设计,水模实验和工业试验结果表明,新型挡渣堰完全能够满足连浇10炉钢的要求。
    25. Numerical simulation on flow and mixing processes in bottom blown ladles
      底吹钢包内流动与混合的数值模拟
    26. Development and application of the compound heat reflecting and insulating layer used for steel ladles are introduced.
      文章介绍了炼钢厂钢包复合反射涂层的研制及应用情况,通过钢包复合反射涂层的应用,解决了钢水散热损失,保证了连铸生产顺利进行。
    27. Discussion on Factors Affecting Self-running Rate of Sliding-gate Systems for Steel Ladles
      影响钢包滑动水口自然开浇率因素的分析
    28. Development and application of magnesia-alumina-carbon bricks for continuous casting ladles
      连铸钢包用MgO-Al2O3-C砖的开发与应用
    29. Casting Process of Huge Flat Ingot With Double Ladles Pouring
      双包浇注钢锭模大平板的铸造工艺