latexes
英 [ˈleɪtɛksɪz]
美 [ˈleɪtɛksəz]
n. (天然)胶乳; (尤指橡胶树的)橡浆; 人工合成胶乳(用于制作油漆、黏合剂等)
latex的复数
双语例句
- Interpenetrating polymer networks latexes were prepared by PTFE latex swollen with acrylic monomers as the seed, and enter PVDF, then the remainder monomer blends were introduced to polymerize.
以聚四氟乙烯为种子乳液，用丙烯酸酯单体对其进行溶胀，加入聚偏氟乙烯后滴加单体聚合，制备出具有互穿网络结构的氟碳有机乳液并采用喷涂法制得疏油涂层。 - The blends include the combination of one latex and another latex, especially hard latex and soft latex, latexes and water-soluble polymers, polymers with different chemical composition, and so on.
水性涂料用树脂的混合主要包括乳液和乳液的混合，特别是硬乳液和软乳液的混合，乳液和水溶性树脂的混合，不同化学成分树脂的混合等。 - The strengthening function of synthetic latexes on the sheet of blended modified polyester fibers and wood fibers was studied in this paper.
本文研究合成胶乳在改性涤纶纤维&木浆纤维混合抄造过程中的增强作用。 - Progress of Fluorinated Acrylate Copolymer Latexes(ⅰ): polymerization techniques and safety of fluorinated acrylate monomers
含氟丙烯酸酯聚合物乳液研究新进展（Ⅰ）&合成技术和含氟单体的安全性 - Preparation of MMA/ BA/ MAA copolymer latexes by nonsoap emulsion polymerization
无皂乳液聚合制备MMA/BA/MAA三元共聚物乳胶粒及表征 - Some latexes occur naturally in the cells of plants such as chicle and rubber trees.
有些乳胶天然存在于植物的细胞中，如糖胶树胶树和橡胶树。 - Preparation 、 Structure and Properties of Nanometer-Silica-acrylate Hybrid Latexes
纳米二氧化硅&丙烯酸酯复合乳液制备、结构与性能的研究 - The influence of crosslinker contents on the properties of latexes and films was investigated.
通过测定PUA乳液和涂膜性能，研究了交联剂用量对PUA乳液和涂膜性能的影响。 - Preparation and characterization of core-shell polyacrylate/ silica sol composite latexes and their pressure-sensitive adhesive properties
硅溶胶/聚丙烯酸酯乳液型压敏胶的制备与性能 - Transmission electron microscopy ( TEM) photos indicate that acrylic latexes were covered by inorganic silica components.
透射电镜（TEM）图显示乳胶粒表面被一层无机硅覆盖。 - Preparation of Water-borne Coatings Employed on the Lower Surface Energy Substrates Through Complexation of Polymer Latexes;
研制高弹性自交联聚合物乳液以克服常规乳胶涂料涂膜导致基层墙面开裂的弊端。 - The polymerization mechanism, the polymer molecule structure and the film forming properties of the latexes were also investigated.
同时对聚合反应的机理、产物的结构及胶膜性能作了考察。 - Disc centrifuge made in our laboratory has been used to determine the particle size and distribution of polystyrene latexes.
应用试制的圆盘离心机测定了聚苯乙烯胶乳的粒径和其分布。 - PU/ PA hybrid latexes had better water resistance and mechanical properties than those of physical polymer blends.
结果表明，由于两种聚合物之间的协同效应使得PU/PA混杂乳液的耐水性和机械性能比其对应的物理机械共混物有显著提高。 - The relationship between polymerization methods-nucleation and growth mechanism of the particle-properties of latexes and films was discussed.
探讨了聚合方法－成核机理－粒子微观结构－乳胶性质之间的关系。 - PA content and NCO/ OH mole ratios in PU/ PA hybrid latexes affected their particle size.
PU／PA混杂乳液中PA含量以及NCO与OH摩尔比将影响混杂乳液的粒径。 - A few methods for removal of residual monomers from polymer latexes were reviewed.
综述了聚合物胶乳中残留单体的几种脱除方法。 - The carboxyl group in the hydrosol polymers has a marked catalysis for the crosslinking reaction between the latexes and amino-resins.
水溶胶聚合物中的羧基对乳液和氨基树脂之间的交联反应具有催化作用。 - The particle size and flow behavior of the latexes, dynamic mechanical properties, tensile behavior, and water resistance of the copolymers, as well as the nucleation mechanism of latex particles were investigated.
对乳胶粒粒径大小、乳液流体力学行为、共聚物的动态力学性质、拉伸行为及耐水性进行了研究，并对乳胶粒的成核机理进行了探讨。 - Study on Synthesis Of Siloxane Acrylic Microemulsion and Paints Development of Organosilicone-Modified Acrylates Latexes
有机硅-丙烯酸微乳液和涂料的合成有机硅改性丙烯酸乳液的研究进展 - Particles with different diameters in the latexes are observed under a metallurgical microscope.
在金相显微镜下观察了乳液中不同直径的粒子。 - The principle of PVC modified by MBS resin and the properties of SBR latexes reeded were briefly introduced.
本文简要介绍了MBS树脂改性PVC的原理及对所用之原料丁苯胶乳特性的要求。 - Study on Inverse Emulsion Copolymerization of Acrylamide& Increasing the Molecular weight of Polymer and the Solid Content of Latexes
丙烯酰胺反相乳液共聚合&提高聚合物分子量和胶乳固含量的研究 - This paper reviewed the recent years 'studies on macromolecular materials toughened by thermoplastic resins, core-shell latexes, liquid crystal polymers or inorganic rigid particles, respectively.
对近些年来热塑性树脂增韧体系、核壳粒子增韧体系、液晶高聚物增韧体系及无机刚性粒子增韧体系等增韧高分子材料的研究进展进行了综述。 - Hybrid latexes of aqueous polyurethane modified by acrylic monomers with core-shell structure have been prepared.
通过自由基乳液聚合，合成具有核壳结构的水性聚氨酯/丙烯酸酯复合乳液（PUA）。 - PAN/ PBA composite polymer latexes were prepared using three diffrent feed methods and two diffrent feed sequences.
用三种不同的加料方法和两种不同的加料顺序，制备了PAN/PBA复合聚合物乳液。 - The curing behavior of acrylic latexes with tetrahydro 1,3,4,6-tetrakis ( hydroxymethy) glycolril was studied by means of TBA.
用动态扭辫分析法（TBA），研究了丙烯酸酯乳胶与四羟甲基甘脲的固化行为。 - A one-component resin with excellent performance is screened out by surveying on waterborne resins and latexes home and abroad.
通过对国内外水性树脂及乳液的考察，筛选出性能优异的单组分水性树脂。 - Monodisperse poly ( styrene-co-acrylic acid) latexes with carboxylic surface are synthesized by soap-free emulsion polymerization.
利用无皂乳液聚合法合成了表面富含羧基的单分散聚（苯乙烯-共-丙烯酸）乳胶粒子模板。 - Finally, the dynamic rheological properties of the pH/ temperature dually responsive IPN polymer microspheres latexes were studied.
最后，对具有IPN结构的pH/温度双重刺激响应性聚合物微球水分散液的动态流变性能进行了研究。