lath

noun

1. 灰板条；板条；板筋
   a thin narrow strip of wood that is used to support plaster (= material used for covering walls) on the inside walls and the ceilings of buildings

1. This paper sets up the plastic energy consumption and tensile functions of the ideal rigid plastic steel wire and lath under large curvature tension bending.
   建立了理想刚塑性钢条、板条在大曲率拉弯过程中的塑性耗能量函数与拉力函数。
2. The relationship between fracture toughness and notch toughness, tensile ductilities in lath martensite steel has been investigated.
   研究了超高强度板条马氏体钢的平面应变断裂韧性与缺口韧性、拉伸塑性之间的关系。
3. I must get a lath even a small one for stuff like this.
   我必须得到板条，甚至一小一为这样的东西。
4. By the integration of numerical result and CNC programming, a new method which advances the efficiency at the CNC machining of arced lath tool is provided.
   通过数值解和数控编程结合，为圆弧车刀在数控加工中提高加工效率提供了一种新的办法。
5. A as thin as a lath women.
   一个骨瘦如柴的妇女。
6. Furthermore, both the effect of martensite lath boundaries on the nucleation of dynamic recrystallization, and the mechanism of nucleation and growth of equiaxial nanometer grains were revealed.
   揭示了马氏体板条界面在温变形过程中对动态再结晶形核的作用，及退火过程中等轴纳米晶粒的形成机制和长大机制。
7. They took their lath swords, dumped their other traps on the ground, struck a fencing attitude, foot to foot, and began a grave, careful combat, "two up and two down."
   他们各持一把木片的剑，把身上多余的东西都扔到地上，两人脚对脚呈对峙状站立，开始了一
8. Effect of Lath Martensite Morphology on the Mechanical Properties of Steel
   条状马氏体形态对钢力学性质的影响
9. A conventional plaster application using metal lath mechanically fastened to the existing exterior and finished with a good acrylic cement finish is what is normally recommended.
   通常建议的上灰泥的方法是，用金属板把灰泥固定在现有表面上，再以优质丙烯酸接合剂涂抹作为最后一道工序。
10. This method is suggested because the weight of one full coating might be too much, and you would probably have some trouble keeping it in place on the lath.
    建议这样做的原因是一个整层的重量会很大，可能不大容易在板条上使灰浆就位。
11. I don't have no stinking lath!
    我手边没有任何臭板条！
12. Make-up: long edge of lath made according to the actual needs of the90-degree angle to join together.
    拼版：板条长边根据实际需要做成90度角的企口和凹口来拼接。
13. Lath lath should fitness of first selection appliance, be like dumbbell, barbell, pulling force implement, assorted fitness implement etc.
    瘦人应首选器械健身，如哑铃、杠铃、拉力器、组合健身器等。
14. He's as thin as a lath.
    可他瘦得就像根板条。
15. The microstructure evolution and grain-refining mechanism of the process, severe rolling of lath martensite, was studied.
    分析了采用板条马氏体大变形轧制工艺制备超细晶钢板时的显微组织演变过程及其晶粒细化机制。
16. The results indicated that there are some microtwins in lath martensite.
    结果表明，板条马氏体内存在少量的微孪晶。
17. They are dislocated lath martensite area and twinned martensite area respectively.
    这些微区分别为内孪晶马氏体区和位错板条马氏体区。
18. A series of morphologies of lath microstructure can be attained by TMP.
    通过TMP可获得各种各样的板条组织。
19. The microstructures of the steel are fine lath martensite after "zero time holding" quenched.
    零保温淬火后可获得细小的板条状马氏体组织。
20. The microstructure of surfacing metal is lath martensite and carbide.
    堆焊层显微组织为低碳马氏体和碳化物。
21. The microstructures of heat affected zones of T91/ 10CrMo910 are tempered sorbite and thin tempered lath martensite and the toughness is good.
    10CrMo910热影响区和T91热影响区的组织分别为索氏体和细的回火马氏体，韧性较好。
22. The prodominant twin martensite and partial lath martensite existed in dendrite.
    枝晶内为孪晶马氏体和部分板条马氏体。
23. The Effect of Microstructure on Crack Initiation and Steady State Propagation of Lath Martensite
    微观结构对板条马氏体启裂和裂纹稳态扩展的影响
24. Nb and RE oxide could refine the microstructure, thus the hardness of hardfacing alloy could also be improved. The hardfacing alloys microstructure in this research were composed of lath martensite, residual austenite and dotted carbides.
    Nb和稀土氧化物可以细化组织，从而提高堆焊金属的硬度，硬面合金的组织主要包括板条马氏体，残余奥氏体和点状碳化物。
25. And when the quenching temperature is high, the chemical composition of the austenite grain can fully spread, while the defects in the crystal will be reduced, which would promote the formation of lath martensite.
    而在淬火加热温度很高时，奥氏体晶粒中的化学成分可以充分地扩散，同时晶体中的缺陷也会减少，会促进板条马氏体的形成。

noun

1. a narrow thin strip of wood used as backing for plaster or to make latticework