metallizing
英
美
n. 喷镀金属；镀金属; 喷镀；熔射
v. 使金属化（metallize的ing形式）
双语例句
- The outer casing is pasted with a metallizing plastic film layer with various colors and patterns printed by ink to accomplish the decorative effect of the outer casing.
在外壳上用油墨印刷各种花色图案的金属化塑料薄膜层直接粘贴上，完成了外壳的装饰作用。 - Research Status of Diffusion Metallizing Technique for Non-ferrous and Alloy
有色金属及合金渗金属技术研究现状渗金属的多孔耐火材料 - Influences of the metallizing technologic conditions, Ni plating and subsequent annealing on the joint shear strength were investigated.
考察了金属化工艺、镀镍及镀后热处理对接头剪切强度和钎焊效果的影响。 - Its subject coverage includes: electrodeposition, chemical vapor deposition, vacuum metallizing, and hard-chrome plating;
它的主题报导包括：氮化的作用在摩擦学、摩擦损耗、涂层粘着与滑动磨损等； - The Second Metallizing Process of Ceramic to Metal Seal
陶瓷-金属封接中的二次金属化工艺 - An Investigation of High Performance of Equal-Pressure Molding Ceramics and Its Metallizing Process Matching
高性能等静压成型陶瓷与其金属化工艺匹配性的探索 - Study of Ni-Cu-P Metallizing Process on Ceramic Surface
陶瓷表面Ni-Cu-P金属化工艺的研究 - Decompression and boiling, or the immiscible separation of CO_2 occured during the metallizing process.
成矿过程中伴有减压沸腾或CO2的不混溶分离作用； - Study of the Russian Ceramics and Metallizing Technology
俄罗斯陶瓷及其金属化技术的研究 - The Second Metallizing of Ceramic to metal seal
陶瓷&金属封装中的二次金属化技术 - The experimental results show that the tungsten powder sintering was affected by metallizing temperature. Y_2O_3 acts the key role for joining tungsten to ceramic.
结果显示金属化温度影响W粉的烧结，配方中的氧化钇在连接W和陶瓷基体中起到关键作用。 - This paper analysed the limitation of standard method on surface metallizing of nonmetallic decorative materials. The main technology of surface metallizing of nonmetallic decorative materials by vacuum evaporation is investigated.
分析了传统非金属表面金属化工艺的局限性，探讨了采用真空镀膜法实现低密度非金属装饰材料表面金属化的主要工艺环节。 - In this paper are introduced and discussed the ways and study results of metallizing cladding onto diamond to raise diamond tool's working effect.
介绍与论述了提高金刚石工具使用效果的金刚石表面金属化方法及研究成果。 - The process is applicable to the metallizing of ABS plastics and through-holes of printed circuits board.
此工艺适用于ABS塑料和PCB板通孔的金属化。 - This paper has been studied in ceramic metallizing layer thickness and its uniformity. The differences of ceramics and metallizing formulations must be different metallizing thicknesses.
本文叙述了金属化层厚度及其均匀性的重要性，不同的陶瓷和不同的金属化配方应具有不同的厚度。 - The New Technique of Metallizing the Surface of Plastics and its Applications
塑料表面金属化新技术及其应用 - Application and development of the techniques of die surface diffusion metallizing
模具表面渗金属技术的应用与发展 - It was revealed by the experiments and analyses that the metallizing aluminum coating was firmly combined with the magnesium alloy being as the base material and the excellent anticorrosion property could be obtained.
试验和结果分析表明，热喷铝层和镁合金基体结合牢固，并具有良好的耐腐蚀性能。 - This metal powder blending method reduced the equipments and producing costs, improved the sanitation compared with traditional electroplating and vacuum metallizing methods.
母粒掺混法与传统的电镀法、真空镀膜法生产的银色塑料制品相比，该法直接掺混金属粉，因此减少了设备投资，降低了生产成本，改善了车间卫生条件。 - The kinetics of lithiation for polybutadiene ( PB) with 1,2-and 1,4-units contents of 98% and 92%, respectively, was investigated at 70 ° C, by using n-BuLi/ TMEDA ( tetramethylethanediamine) as metallizing reagent and cyclohexane as solvent.
以n-BuLi/TMEDA（四甲基乙二胺）为金属化试剂，环己烷为溶剂，研究了1,2-结构和1,4-结构分别为98%和92%的聚丁二烯（PB）在70℃时的锂化反应动力学。 - In other words the application of double glow discharge ionic Ni-Cr metallizing of carbon steel and workpieces are followed.
此外，还列举了双层辉光离子镍铬共渗工艺在碳钢钢板及碳钢零件上的应用。 - The final metallizing ratio of pelletes increases with the increase of heating temperature.
该球团的金属化率随加热温度提高而增加。 - This paper discussed the metallizing technology of resin matrix composites products and mainly introduced four methods of metallizing, such as vaporizing in vacuum, ion sputtering in vacuum, electroforming and metallic spraying transfer et al.
主要讨论了树脂基复合材料制件的表面金属化技术，着重介绍了真空蒸镀、真空离子溅射、电铸法和金属喷涂转移法等四种金属化方法。 - Application of Plasma in Metallizing Nonwovens
等离子体在非织造布金属化处理中的应用 - The effects of heating temperature, carbon contents of pellet, composition of furnace gas, additives, and the kinds of raw materials on the rates of reduction, final metallizing rates and metallurgical characteristics of carbon-bearing pellets have also been investigated.
研究了加热温度、球团配碳量、炉气组成、添加剂、原料种类等对含碳球团的还原速度和金属化率的影响及球团的冶金特性。 - Research on the Processing of Metallizing Aluminum and Corrosion Resistance on the surface of Magnesium Alloy
镁合金表面热喷铝工艺及防腐性研究 - The process of copper metallizing of carbon powder was investigated.
研究了在碳粉表面电镀铜的工艺。 - It expounds the metallizing process from two aspects. One is the driving force for the ion migration, the other is the possibility for ions migrating in the polymer film.
从离子在聚合物中迁移的推动力和可能性两个方面阐述了化学还原法使高分子材料表面金属化的微观过程，开拓了一个崭新的领域。 - In order to promote the application of vacuum electron devices, extensive studies on alumina ceramics and its metallizing have been carried out worldwide.
为了促进真空电子器件的应用，氧化铝陶瓷及其表面金属化得到广泛的关注和研究。