non-solvent
英 [ˈnəʊn ˈsɒlvənt]
美 [ˈnoʊn ˈsɑːlvənt]
n. 非溶剂
双语例句
- It is usually used to suck gas that does not contain soild particle and is non-solvent or little solvent.
通常用于抽吸不含固体颗粒，不溶或微溶于工作液，无腐蚀性气体。 - The performance index, main points for application of non-solvent adhesive tape and train of thoughts in its development are introduced in the article.
介绍了无溶剂型胶粘带的研制思路、性能指标和施工技术要点。 - We are one of the leading companies adopting environmental non-solvent technology in China to produce top-grade glassine adhesive materials in rolls.
在中国率先采用环保型无溶剂涂硅技术，大量生产高档格拉辛卷筒不干胶材料。 - It is pointed out that the research of green coating should be directed to the development of high solid coating, non-solvent coating, powder coating, radiation curable coating and water-base coating.
介绍了世界涂料发展的趋势，指出绿色涂料的研究方向应该向高固体份涂料、溶液无溶剂涂料、粉末涂料及辐射固化涂料和水性涂料发展。 - The fluid sealant formulated with PVC plastisol has the good characteristics of mono component, non-solvent, storage stability.
PVC塑溶胶配制的密封胶具有单组分、无溶剂、贮存稳定及弹性好、耐化学介质优良等特点。 - Hot melt adhesive is a kind of non-solvent, 100% fixed component thermal plasticity material.
热溶胶是一种不含任何溶剂，为100%固定成份热可塑性物质。 - The bisphenol F was synthesized by condensation reaction using phosphoric acid as catalyst, phenol and formaldehyde as feed stock under the non-solvent condition.
以苯酚、甲醛为原料，以磷酸为催化剂，无溶剂条件下经酚醛缩合合成了双酚F。 - Through comparison with typical SOX extraction method, and supersonic extraction method, it showed that these three methods were in conformity with current sample non-solvent pretreatment trend, with higher extraction efficiency and wide application characters.
通过与经典的索氏萃取法和超声萃取法的比较，表明这3种方法符合目前样品处理无溶剂化的潮流，具有萃取效率高、应用广泛的特点。 - Studies on the Lipase-Catalyzed Modification of Teaseed Oil in Non-Solvent System
非溶剂系统中茶油酶促改性的研究 - The solubility of substance in non-solvent effect on the preparation, the lower solubility is helpful to obtain lower size, weak aggregation, spherical particles.
物质在非溶剂中的溶解度对纳米颗粒的制备存在影响，较低的溶解度有利于制备小粒度、弱团聚、颗粒球化度好的粉体材料； - The traditional non-solvent epoxy glass flake coating was modified by self-made electroless Ag flake graphite and the glass flake conductive coating was prepared.
以自制的化学镀银鳞片石墨对传统的无溶剂型环氧玻璃鳞片涂料进行改性，制得了玻璃鳞片导电涂料。 - Using polystyrene foam wastes as elementary component and butyl acrylate, styrene and vinyl acetate as nontoxic modifiers, a new non-solvent emulsion of low cost was prepared.
用废聚苯乙烯泡沫作为主要原料，丙烯酸丁酯、苯乙烯和醋酸乙烯酯作为改性剂制备了一种低成本的无溶剂型聚合物乳液。 - Nano-composite energetic ma te rials research were reviewed including the preparation technologies of sol-gel method, solvent/ non-solvent method, energetic ball milling method and porous metal/ filler method.
对纳米复合材料的研究进展进行了综述，例举多种纳米复合材料的制备方法：sol-gel法、溶剂/非溶剂法、高能研磨法、多孔金属/填充物复合法。 - Spray Polyurea Elastic ( SPUA) is new-fashioned technology of non-solvent and non-pollution adverse effect.
喷涂聚脲弹性体技术是一种新型无溶剂、无污染的绿色施工技术。 - Rheological Properties of Room Temperature Quick Curing Non-Solvent Polyether Urethane Adhesives
室温快速固化非溶剂聚醚氨酯胶的流变性能 - The neoprene adhesive includes solvent type, latex type and non-solvent type.
氯丁胶粘剂分为溶剂型、乳液型和无溶剂型。 - Application of Non-solvent Polyurethane Coating in Jacking Construction of Steel Pipe with Large Caliber
无溶剂聚氨酯涂料在大口径钢管顶管工程中的应用 - Comparing with the suspended emulsion polymerization of monomer/ polymer dissoluble system ( such as vinyl chloride), non-solvent of PMMA, such as cyclohexane, must be added to the polymerization system, to obtain porous PMMA resin.
与单体/聚合物不溶体系的悬浮态乳液聚合相比，对于MMA悬浮态乳液聚合，需要加入聚合物的不良溶剂，如环己烷，才能得到疏松、多孔结构的聚甲基丙烯酸甲酯（PMMA）树脂。 - Study on the Quick Preparation of Epoxy Soybean Oil with Non-Solvent Process
无溶剂法快速制备环氧大豆油的研究 - AS can be more easily adsorbed at the surface of TATB in non-solvent than in good solvents.
AS溶解在相对不良溶剂，其在TATB表面上的被吸附量大于相对良溶剂中的。 - The Application of Non-solvent Laminate Technology in Paper Composite
无溶剂复合技术在纸复合材料中的应用 - Curing process is an essential step in the preparation of silicone resin coating, in which polycondensation of multi-silanol mainly occurred in a non-solvent system.
固化是有机硅树脂涂层制备过程的一个重要步骤，其本质是多元硅醇在非溶液体系中的交联缩聚反应。 - Effects of Solvent/ Non-solvent System on the Properties and Structure of Polyethersulfone Microporous Membrane
溶剂/非溶剂体系对聚醚砜微孔膜性能和结构的影响 - Factors influencing membrane morphology such as polymer, polymer concentration, solvent/ non-solvent, composition of casting soluting, composition of coagulation bath were also discussed in this paper.
并对影响膜结构形态的因素如聚合物的选择、聚合物的浓度、溶剂/非溶剂体系的选择、制膜液的组成、凝胶浴的组成等进行了讨论。 - Meanwhile, studies have been carried out on the preparation conditions, such as the molecular weight of additives, the additive content, non-solvent content and the post-processing treatments.
通过改变添加剂分子量、添加剂浓度、非溶剂浓度和后处理方法等因素，研究了其对制备多孔纤维的影响。 - Non-solvent groups required less time to achieve satisfactory gutta-percha removal and rootcanal refinement than the solvent groups.
未使用溶剂组达到满意的去牙胶效果并进行根管再预备所需的时间比使用溶剂组更短。 - Liquid paraffin ( LP), which is a non-solvent for PVDF but a solvent for diluent mixtures, was used as bore liquid to make a lumen of the hollow fiber for purpose of exchange with diluent near the inner surface of hollow fiber.
液体石蜡（LP）（PVDF的非溶剂，DBP/DEHP的溶剂）作为制备中空纤维膜内腔的芯液，并用来与中空纤维内表面的稀释剂进行交换。 - It was found that the solution viscosity increased with the increase of concentration of polymer/ non-solvent or the increase of aging time at a certain shear rate.
一定的剪切速率下，随着溶液中PAN浓度增加、非溶剂加入量增加、熟化时间增大，溶液粘度都会增大。 - Membranes were obtained by adding the casting solution into the non-solvent ( water).
将铸膜液浸入非溶剂（水）中成膜，膜中稀释剂经萃取脱除。 - The temperature of coagulation also effected solvent and non-solvent diffusion.
凝胶浴温度影响溶剂-非溶剂扩散。