nozzles

英 [ˈnɒzlz] 美 [ˈnɑzəlz]

n.  管口; 喷嘴
nozzle的复数

柯林斯词典

  1. N-COUNT 管嘴;喷嘴
    The nozzle of a hose or pipe is a narrow piece fitted to the end to control the flow of liquid or gas.
    1. If he put his finger over the nozzle he could produce a forceful spray.
      如果他把手指按在喷嘴上，就可以产生强力的喷射。
点击展开全文

双语例句

  1. In order to minimize the boundary layer effects, the nozzles were made as short as possible.
    为了减少附面层效应，喷嘴做得尽可能地短些。
  2. Q.How do I size nozzles for a multiple gun system?
    问题对于一个多水枪系统我应选择多大的喷嘴？
  3. Is a company specializing in the production of industrial nozzles and air filter manufacturers.
    长原喷雾产品有限公司是一家专业生产工业用喷嘴和空气过滤器的厂家。
  4. Atomized spray injectior Flames jetted out ( of the nozzles).
    （喷注器）雾化式喷嘴火焰（从喷嘴中）喷出来了。
  5. All welds for nozzles and manways shall be full penetration through the vessel wall.
    接管和人孔的焊缝应为穿过容器壁的全熔透。
  6. Fatigue behavior of a model of boiler drum with two nozzles are studied.
    报导了带两只接管的模拟汽包的疲劳行为研究。
  7. Flames jetted out ( of the nozzles). The fire sent up spurts of flame.
    火焰（从喷嘴中）喷出来了.大火喷出一股股火焰。
  8. In practice, the turbine disc and the nozzles are fitted into a casing.
    实际上，涡轮圆盘和喷嘴是装在机壳里的。
  9. Temperature and stress fields of multi-pass welding of orthogonal nozzles were simulated.
    对正交接管焊接接头的温度场和应力场进行了数值模拟。
  10. Aperture atomizer The spray nozzles are designed to produce a dense spray at a predetermined angle.
    喷孔式喷油嘴喷雾器喷嘴是按预定角度产生稠密水雾来设计的。
  11. Firstly, this paper introduced a Spray Angle Measuring System of Industrial Nozzles, whose principle based on image p.
    本文首先介绍了一种基于数字图像处理的非接触工业喷头喷雾角度测量的系统。
  12. Design of internal structure parameters of flat fan nozzles is studied and design method is presented in details.
    对扁平扇形喷嘴的内部结构参数设计进行了系统研究，给出了具体设计方法。
  13. Universal printer nozzle from many small nozzles composed of dust particles and inkjet hole almost.
    万能打印机的喷头由很多细小的喷嘴组成，喷墨孔与灰尘颗粒差不多。
  14. ASIMCO Tianwei exports diesel pumps, injectors, nozzles, plungers and valves, auto part machining.
    亚新科天纬的出口产品包括：喷油泵、喷油器、喷油嘴、柱塞、出油阀、汽车零部件加工类。
  15. Provide tangential nozzle design for level nozzles on the liquid sump.
    在液体排污箱上水平的接管提供切线方向接管设计。
  16. This paper explained the design of nozzles, injectors and burner cones of new ignition with producer gas on forced pre-mixing and the method of flame stability.
    根据发生炉煤气的特性，采用强制预混燃烧方式，设计了点火器的喷嘴、引射器及烧嘴，并对稳定火焰的方法也进行了研究。
  17. A new style of double nozzles steam-jet ejector is introduced on the basis of single nozzle steam-jet ejector.
    介绍了蒸汽-水喷射混合器的工作原理相关的设计计算及其在蒸汽-水热回收系统中的成功应用。
  18. The design approach of internal structure parameters of flat fan nozzles with a lateral V-shaped cut was presented.
    对侧向V型狭缝式扁平扇形喷嘴的内部结构参数设计方法进行了研究。
  19. A low maintenance solder bath pump system that can be fitted with the proven AP-1 range of nozzles.
    一套高可靠性低维护的锡锅及泵系统，可配有一套通用的高可靠的AP系列焊嘴。
  20. Four nozzles, canted outboard, split the exhaust of the solid rocket motor into four equal tails.
    四个向外倾斜的喷管把固体火箭发动机的排气流分成四个相等的尾巴。
  21. Both suction and discharge nozzles are horizontal, which has simplified the connection of pipeline.
    泵吸入口和吐出口均水平方向，简化了管路的连接。
  22. The act of ejecting or the condition of being ejected. Flames jetted out ( of the nozzles).
    喷出喷出的动作或被喷出的状态火焰（从喷嘴中）喷出来了。
  23. Corrosion resistant SS fluid passages, Air Control Valve in Ergonomic handle, with new MAXIMUM DELIVERY air nozzles.
    耐腐蚀不锈钢流体通道，空气控制阀在人体工程学手柄，最大的传送与新空气喷嘴在行业后面。
  24. The nozzles are satisfactory for powder feeding in laser cladding and can be used for material synthesis of powders.
    孔式同轴送粉系统较好地满足了激光熔覆对送粉喷嘴的要求，并且能用用来进行多种元素粉末的材料合成。
  25. Based on this condition, number of nozzles and nozzle size are determined.
    在以上条件的基础上我们可以计算出喷咀的数量和大小。
  26. That's one of the front nozzles with the actuating mechanism.
    这与执行机构的前面喷嘴之一。
  27. The spray nozzles are designed to produce a dense spray at a predetermined angle.
    喷嘴是按预定角度产生稠密水雾来设计的。
  28. Another variant switches multiple nozzles on or off to achieve a similar result but without the fine control.
    另一个交换机的多个变种在喷嘴或关闭，以达到类似的结果，但没有很好的控制。
  29. The protection of spray nozzles for the screens of paper making machines.
    对于纸张的制造机器屏幕保护喷嘴。
  30. This paper is focused on the analysis of three nozzles with different entrance shrinking angle with FEM method.
    文中运用有限元法对三种不同入口收缩角的喷嘴进行了分析。
点击展开全文

考试分类

行业分类

柯林斯词典词频分级词汇

其他分类