pipings

(piping 的复数) n. 吹笛, 笛声, 管道, 尖锐声音, 衣服滚边
a. 吹笛的, 高音的, 平静的, 乐声优雅的
piping 的复数



双语例句

  1. With envy of my sweet pipings.
    疑似嫉妒我的婉转笛音。
  2. Many kinds of primers shall be applied on pipings of different systems after blasting.
    在一次喷砂除锈之后,有多种底漆需要在不同系统的管线上喷涂。
  3. Listening to my sweet pipings.
    谛听我的笛音婉转。
  4. Every owner shall keep and maintain the interior of his unit and all wirings and pipings thereto which do not form part of the common areas and facilities and all electrical and sanitary appliances thereto in good reapir and condition.
    每名业主须保持,及保养其单位内部及所有与其连接但不属于公共地方及设施的线路及管道,与所有电力及卫生设备在一良好的状况。
  5. Standard for welding and acceptance of steel pipings and pipelines
    钢质管道焊接及验收标准
  6. At the sorrow of my sweet pipings.
    我悠扬的笛音在悲鸣。
  7. Stress Calculation of Defect Location in Pressure Vessels and Pipings
    压力容器和管道缺陷部位的应力计算
  8. Analysis of Breakdown Causes for Pipings at Elevated Temperature and Its Solution
    高温管道的故障分析及对策
  9. New Construction of Malleable Iron Pipings Annealing Furnace
    玛钢管件退火炉结构的新尝试
  10. Thrust forces, generated by thermal distortion of steam and oil pipings joined to steam turbines, during operation, and acting on the turbine proper, constitute important potential factors for inciting vibration of a set.
    在诱发机组振动的潜在因素中,与汽轮机相连接的蒸汽及油系统管道由于运行中高温热变形引起的对本体的推力是其中的重要方面。
  11. The Application of Float type Steam Traps with Guide Rod Sleeve Yale on Steam Pipings and Steam Consuming Equipment
    柱套浮子式疏水器在蒸汽管道和用汽设备上的应用
  12. An introduction is presented to ways of applying software ANSYS in the design of vital pipings.
    介绍了ANSYS软件在管道设计中的应用。
  13. Steam Measurement and Pipings Loss
    蒸汽计量与管网损失
  14. Flow vibration in turbine control valve is the major consequences of valve stem rupture, valve disc damage as well as the resonance of valve and its pipings.
    调节阀的流体振动会造成阀杆疲劳断裂与阀碟的损坏,以及整个阀门及管道系统的共振。
  15. Study on surface crack opening displacement and its applications in pressurized vessels and pipings
    表面裂纹张开位移的研究及在压力容器与管道中的应用
  16. The Ultimate Strength of Very High Pressure cylinders and Pipings
    超高压容器及管道的极限强度
  17. None of pipings or shapes was painted wrong in the total painting area of 21600 m2 in this project so that the painting quality goes up to a new step.
    该工程共喷砂喷漆21600多m~2,无一根管线(型钢)的油漆用错。涂装质量上了一个台阶。
  18. The first job, in designing pipings of a direct cooling system, is to choose a structurally rational calculation model, which can warrant the piping's strength and stability and simultaneously satisfy thrust limitations, set by the steam turbine's exhaust hood structure.
    在直接空冷系统主管道的设计中,首要任务是合理选择结构计算模型,以保证主管道自身的强度和稳定性,并满足汽轮机排汽装置推力的要求。
  19. New Calculation Method of Technology of Natural Gas-Condensate Pipings
    天然气-凝析液管路工艺计算的新方法
  20. In this paper the application of risk analysis technology on three pipings is described for expending the application of risk analysis technology and improving risk-based management level.
    本文从我国压力管道的现状出发,简要阐述了风险分析技术在不同管道中的应用,旨在促进风险分析技术应用的推广和提高我国压力管道风险分析管理水平。
  21. Test Study of the Influence of Thrust Forces in Pipings on Operational Safety of Steam Turbines
    管道推力对汽轮机安全运行影响的试验研究
  22. It is shown in use that the thermal insulation performances of these flexible pipings made according to the design requirements are excellent.
    使用表明,按设计要求制造软管的绝热性能优良。
  23. Laboratory test on resistance of underground plastic pipings nylon_ ( 11) and low pressure ( high density) polyethylene to attack by Coptotermes formosanus Shiraki
    尼龙(11)和低压(高密度)聚乙烯塑料管道抗家白蚁蛀蚀的室内测定
  24. Pressure pipings reliability safety assessment
    压力管道可靠性安全评定
  25. About the structural mechanics problem for the equipment and pipings, the three dimensional stress and fracture analyses are studied.
    对于设备和管道的结构力学问题,研究了三维应力和三维断裂。
  26. Substituting liquid seal for safety valve; connecting general pipings with welding way;
    以液封代替安全阀,大部分管路以焊接方式连接;
  27. Reasons for Damage of Pipings and Valves in Ash Water System and Adoption of Preventive Measures
    灰水系统管道阀门损毁原因分析与对策
  28. On the method for determining the quantitative norms of materials for the pipings of four categories in a power plant
    火电厂四大管道材料供应定额的确定
  29. Gauge-measuring technique with eddy current for detecting cast iron pipings
    电涡流测厚技术在检测铸铁管路中的应用