plasticizing
英 [ˈplæstɪsaɪzɪŋ]
美 [ˈplæstɪsaɪzɪŋ]
v. 使增塑; 使塑化; 使可塑
plasticize的现在分词
双语例句
- The lines are reasonable in structure, stable in performance, wonderful in plasticizing, high in productivity, low in energy consumption, which make the product clear in the interfaces between layers.
结构合理、性能稳定、塑化好、产量高、能耗低、分层清晰，是生产高强度、耐老化、无滴、透光、保温等多功能大棚膜、土工膜的理想设备。 - The only function of the pre-plasticizer is plasticizing, injection is left to another unit called the plunger.
预熔器只做塑化，注射由独立的柱塞负责。 - Effect of plastifiers on compatibility, plasticizing efficiency, mechanical properties of SPU sealants were discussed by swelling test and dynamic properties analysis.
通过溶胀实验和动态力学性能分析，讨论了增塑剂对SPU密封胶的溶胀性能、增塑效率以及力学性能的影响。 - The few methods to increase plasticizing time without lengthening cycle time all depend on simultaneous action.
几个可增加塑化时间而不增加周期时间的方法都离不开并行动作。 - This paper lays stress on DSC technology and method for measurement plasticizing or coagulating degree of RPVC mixture.
通过DSC技术与方法，定量了RPVC配料的塑化度或凝胶化度。 - When the temperature rises, the viscosity deceases, which is good for plasticizing.
料筒中料温升高时黏度降低，有利于塑化； - Utilize DSC technology for studying on plasticizing or coagulating degree of RPVC-U, supplement dichloromethane resistance testing.
应用差示扫描量热法（DSC）技术研究了RPVC管材的塑化度或凝胶化度，并辅以二氯甲烷浸渍试验。 - Based on the shear theory of hydrodynamics, the damping coefficient in plasticizing process is determined in this paper.
依据流体动力学的剪切理论，确定预塑过程聚合物熔体的阻尼系数。 - Experiments have proved that an improved bentonite used as a plasticizing agent in the body of electrical porcelain insulators can greatly plasticize the body.
通过在电瓷绝缘子坯料中使用一种改良膨润土作为增塑剂来弥补粘土可塑性的不足，试验证明其对坯料可塑性能增强效果明显。 - Everything else unchanged, the bigger the screw diameter, the bigger is the depth of the screw flight in the metering section, which increases plasticizing capacity.
在螺杆的设计不变的情况下，螺杆直径越大，计量段的槽深便越深，增加了塑化能力。 - Why this three screw extrusion machine has such a powerful plasticizing dispersion function?
为什么这种三螺杆挤出机具有如此强大的塑化分散功能呢？ - Effect of Activated Gangue on Plasticizing Efficiency of Plasticizers
活化煤矸石对减水剂塑化效果的影响 - Skim Quick-Set ( SQS) is a water reducing plasticizing and accelerator admixture specially designed for concrete and mortar mix.
实坚快速硬化剂是一种液体混合料，与洋灰混凝土混合时，能发挥极佳功能及加速硬化。 - It is mainly used in plasticizing, extruding and forming PVC pipe, plate, sheet, film, profile, and granulator etc.
主要用于PVC管、板、片、膜、型材、造粒等塑料制品的塑化和挤压成型。 - Screw of big length to diameter ratio, uniform plasticationhigh plasticizing capability.
大长径比螺杆、塑化均匀、塑化能力特高。 - This machine is with the advantage of low-speed cutting, no-material decompounding, even plasticizing and mixing, high output and wide using area.
该机具有剪切速率小，物料不易分解，塑化混练均匀，产量高，适应范围广等特点。 - Thermostat: It can accurately measure the temperature of cavity milling to prevent excessive temperature to caking and plasticizing.
能准确测出磨出粉料的温度，防止温度过高而引起的结块和塑化。 - Based on plasticizing mechanism of river mud, the influence of inorganic plasticizer, organic plasticizer and inorganic-organic plasticizer on the plasticity of river mud was studied.
根据河道淤泥的塑化机理，分析了无机增塑剂、有机增塑剂和无机-有机复合增塑剂对泥料塑性的影响。 - Influences of gel content and use level of dull PVC resin on the extinction property and plasticizing property of products were studied.
介绍了消光PVC树脂的应用及性能，研究了消光PVC树脂的凝胶含量、用量等因素对制品的消光性能及塑化性能的影响。 - Effect of Vibration Parameters on Plasticizing Capability of Dynamic Injection Screw
振动参数对动态注射螺杆塑化能力的影响 - High torque and excellent performance of hydraulic motor can drive screw directly and shorten plasticizing time so that saves energy.
采用高扭力、效率佳之油压马达，直接驱动螺杆，可缩短塑化时间节省能源。 - The injection weight, injection rate and plasticizing capacity change according to the model and kind of the material.
射出量，注射率及塑化能量依材料类别及模型而改变。 - Soil Plasticizing Technique for EPB Shield Excavation
土压平衡盾构施工中土的塑流化技术 - The plasticizing and modifying of PBA to PMMA by solution and emulsion polymerization was studied.
通过试验研究了溶液和乳液聚合法制备聚丙烯酸丁酯（PBA）对浇铸型有机玻璃（PMMA）的增韧改性。 - The reinforcement of plasticizing effect or POSS was dependent on its dispersion structure.
POSS对硅橡胶的增强效应、增塑效应取决于其分散结构。 - T g and recrystallization temperature of Nylon-6 fibre are greatly reduced by the plasticizing effect of oligomer and water.
低聚体的存在增加纤维的吸水量，这种增塑作用使聚酰胺-6纤维的Tg和再结晶温度大大下降。 - This paper presents trial process and analyzes acid exciting mechanism and activating plasticizing mechanism for paper making black liquid.
介绍了试制过程，并对酸激发机理、造纸黑液的活化增塑机理进行了分析。 - The influence of coupling agent, antioxidant agent, kneading and plasticizing technology on the talc/ PP composite properties was studied, and its properties were measured.
研究了偶联剂、抗氧剂，捏合工艺，塑化工艺对滑石粉/PP复合材料性能的影响并测试了它的性能。 - CK 94 Binder consists of alcohol soluble polymer, solvent, plasticizing agent, stripping agent, defoamer, etc.
作者所研制的电子陶瓷流延成膜黏合剂是由醇溶性聚合物、溶剂、增塑剂、脱膜剂、消泡剂等组成的多组分黏合剂。 - The plasticizing behavior during extrusion with the single screw being cooled was studied.
利用可视化挤出实验对螺杆冷却情况下的单螺杆挤出熔融机理进行了研究。