platen

1. The stress, deformation and fatigue life of the optimal platen were compared with the original platen.
   对比了模板优化前后的应力、变形及疲劳分析情况。
2. Analysis and Research of Die Cutting Platen Press Mechanism and Its Motion Compatibleness
   平压模切机构及其运动协调性的分析研究
3. Following the analysis of the hydrodynamical characteristics and the state of temperature divagations observable sectional divided platen superheaters, a reconstruction proposal is being presented.
   通过分析分隔屏过热器的水动力特性和热偏差情况，提出了分隔屏过热器的改造方案。
4. So including conventional vase, coffee set, tea set and bowl, there are also casket, stationery, pencil vase and bamboo platen, etc.
   瓷胎竹编工艺品，除了传统的花瓶，咖啡具，茶具，饭碗等产品外，还有首饰盒、文具、笔筒、竹压盘等。
5. Any of the pegs on the platen of a printer, which engage holes at the edges of paper. a writing implement with a small toothed wheel that cuts small holes in a stencil.
   （打字机）的齿打字机压纸卷轴上的齿，可在纸沿打孔有小齿轮可以在蜡纸上刻小孔的书写工具。
6. Analysis on Blast of Platen Superheater of Boiler No. 13 in Shijiazhuang Co-generation Power Plant
   石家庄热电厂~13炉屏式高温过热器爆管分析
7. Aluminum platen base, including adjustment device.
   底模用铝合金底板，含可调装置。
8. Research and Design of Horizontal Platen Veneer Dryers
   卧式均压单板干燥机的研究设计卧式均压单板干
9. With finite-element analysis design, platen structure is more reasonable, and has better strength& stiffness.
   有限元分析设计的三大模板，结构合理，刚性好，强度高。
10. Large area of cutting platen is suitable for punching and cutting of large knife molding and width materials.
    裁断压板面积大，适合大刀模宽幅面材料的冲裁落料。
11. This provided a practical and effective method for future's design and optimization of platen of injection molding machine.
    这为注塑机模板的设计及优化提供了一种实用和有效的方法。
12. The utility model provides a platen type fishnet roller, used for the net hauler of a fishing boat to pick and place a net.
    本实用新型提供了一种滚筒式鱼网辊，用于渔船起网机起放网。
13. Driven by single chip, department is biplate or more pieces of platen composed, it will actively department through friction from the drive to the transmission of the input shaft.
    从动部门是由单片、双片或多片从动盘所组成，它将主动部门通过摩擦传来的动力传给变速器的输入轴。
14. Platen by platen ontology, friction slices and platen hub three basic departments to be composed.
    从动盘由从动盘本体，摩擦片和从动盘毂三个基本部门组成。
15. Hydraulic controll of mold platen can reduce noise and shakes.
    模台液压升降，减少震动和噪音。
16. Cause Analysis to Tube Bursting of Platen Reheater of 480 t/ h CFB
    480t/h循环流化床锅炉屏式再热器变形爆管原因分析
17. The balance valve circuit is to support the weight of platen and plunger design.
    回路中的平衡阀是为支撑压板及柱塞的重量而设计的。
18. In order to make the car can smooth start, clutch should be able to downy jointing, this needs platen in axial has certain flexibility.
    为了使汽车能平稳起步，离合器应能柔和接合，这就需要从动盘在轴向具有一定弹性。
19. This invention of cereal song adduce cries "hippo water platen".
    谷歌举出的这个发明叫“河马水滚筒”。
20. Characteristics Study for Ultra-supercritical Boilers with Vertical Rifled Tube Platen Water Wall on Flow Compensation
    超超临界锅炉垂直管屏水冷壁流量补偿特性研究
21. Analysis of over-temperature on the platen superheater of once-through boiler for Supercritical 600 MW Unit
    超临界600MW机组直流锅炉屏式过热器超温问题分析及治理
22. Mould adjustment system is drive by hydraulic controlled gear transmission, which is easy for operation and can keep parallelity between head plate and middle platen.
    液压控制齿轮调模装置，操作简单，稳定保持头板及中板之平行度；
23. The replicas are made by using a thin film of fusible alloy on a stiffening platen.
    复制是用附着在加强托板上的可熔合金薄膜实现的。
24. Experimentation Research on Platen Superheater Excess Temperature Prevention and Main Steam Temperature Improvement
    提高主汽温度防止屏式过热器超温试验研究
25. MS63-type tire changer with large chucks, pneumatic lifting the rotating platen and assembly arm.
    MS63型轮胎拆装机采用大号卡盘，气动升降的旋转压盘和装配臂。
26. Analysis on Reasons of Hot Corrosion Invalidation of Platen Super-heater
    火电厂屏式过热器热腐蚀失效原因分析
27. Avoid water line inlets and outlets through die clamp platen machine T-slots.
    避免水管路进口和出口和钢摸加紧设备的T型槽位置冲突。
28. The results show that: the main reasons for the platen superheater tube failure are the inter-action results of long-time over temperature and short-time over temperature.
    结果表明，该屏式过热器管失效的主要原因是长时超温与短时超温共同作用的结果。
29. The Design and Application of Comprehensive Automation and Information-based Platen in Eight Minerals of Ping Chemical Group
    平煤八矿综合自动化、信息化平台的设计与应用

noun

1. the roller on a typewriter against which the keys strike

2. the flat plate of a printing press that presses the paper against the type

3. work table of a machine tool