polyacrylonitrile

网络  腈纶; 聚丙烯晴; 聚丙烯腈; 聚丙烯腈纤维; 聚丙烯腈标准品

化学



双语例句

  1. The influence of oxidative time and temperature on the stabilization of polyacrylonitrile fiber
    预氧化时间和温度对聚丙烯腈纤维预氧化的影响
  2. Studies on Thermal Conductivity of Carbon Nanotubes/ Polyacrylonitrile Composites
    碳纳米管/聚丙烯腈基复合材料的热导率研究
  3. Study on Magnetic Control Electrostatic Spinning Polyacrylonitrile Fibers and its Microstructure
    磁控静电纺聚丙烯腈纤维及其微观结构
  4. PTAM was blended with polyacrylonitrile ( PAN) and spun into blend fiber which was dyed with acid dyestuff.
    将PTAM与聚丙烯腈(PAN)共混纺丝制得共混纤维,用酸性染料染色,考察其上染率。
  5. Amidoxime functionalized fiber was prepared by reacting polyacrylonitrile fiber with hydroxylamine, resulting from that nitrile group was transformed into amidoxime group.
    以聚丙烯腈纤维为原料,通过与羟胺反应制得偕胺肟基纤维,考察了合成条件对铀吸附性能的影响。
  6. High-Performance Carbon Fiber Manufacturing Improve and XRD Analysis Polyacrylonitrile during Pre-Oxidation
    高性能碳纤维制造工艺改进和聚丙烯腈预氧化成环机理的XRD研究
  7. The Polyacrylonitrile Spinning Control System Based on Industrial Ethernet and PROFIBUS
    基于工业以太网和PROFIBUS的腈纶生产控制系统
  8. Study on Blending Modification of Starch/ Polyacrylonitrile Fiber
    淀粉/聚丙烯腈共混改性纤维的研究
  9. Study on Road Performance of Asphalt Mixture Added Polyacrylonitrile Fiber
    聚丙烯腈纤维对沥青混合料路用性能的影响
  10. Experimental Study on Polyacrylonitrile Fiber to the Mechanical Property of Concrete
    聚丙烯腈纤维对混凝土力学性能影响的试验研究
  11. Compatibility and Rheological Behavior of Polyacrylonitrile/ Poly ( n-Butyl Methacrylate) Blends
    聚丙烯腈/聚甲基丙烯酸正丁酯共混体系的相容性及流变性能
  12. The Study of the Pre-oxidation of Polyacrylonitrile ( PAN) Fiber in Ozone
    臭氧预氧化聚丙烯腈纤维工艺条件的研究
  13. Polyacrylonitrile fiber Determination of compatibility indices of cationic dyes used for dyeing acrylic fibres
    聚丙烯腈纤维,腈纶纤维GB/T2400-1980阳离子染料染腈纶时配伍指数的测定方法
  14. Preparation and characterization of polyacrylonitrile/ polyvinyl alcohol/ paraffine energy storage fiber
    聚丙烯腈/聚乙烯醇/石蜡储能纤维的制备及表征
  15. Preparation and Properties of Polypropylene Microporous Membrane Grafting with Polyacrylonitrile
    聚丙烯微孔膜接枝聚丙烯腈的制备和性能
  16. Influence of polyacrylonitrile fiber on mortar deformation properties
    聚丙烯腈纤维对砂浆变形性能的影响
  17. The Basic Study on Polyacrylonitrile/ Carbon Fiber Reinforced by Chitosan Treated Carbon Nanotube
    壳聚糖处理的碳纳米管增强聚丙烯腈纤维/碳纤维的基础研究
  18. Study on Spinning Formation Mechanism and Processing of Polyacrylonitrile Fibers
    聚丙烯腈纤维纺丝成形机理及工艺相关性研究
  19. Preparation and performance characterization of polyethersulfone/ polyacrylonitrile blending membrane
    丙烯腈-苯乙烯共聚体聚醚砜/聚丙烯腈共混膜的制备及性能表征
  20. Research on Heat Treatment in Nitrogen Gas during the Stabilization of Polyacrylonitrile Fibers
    氮气中环化热处理对聚丙烯腈纤维不熔化的影响
  21. Study on Spinning Technology of Polyacrylonitrile/ Ionic Liquids Solutions
    聚丙烯腈/离子液体溶液纺丝成型工艺研究
  22. Structure and Properties of Polyacrylonitrile/ Na-montmorillonite Nanocomposite Fiber
    聚丙烯腈/钠基蒙脱土纳米复合材料的结构和性能研究
  23. Effect of hot water drawing on structure and properties of polyacrylonitrile nascent filament
    热水浴拉伸对聚丙烯腈初生纤维结构和性能的影响
  24. Studies on Gel-spinning of Chitosan Dispersion Carbon Nano-tubes/ polyacrylonitrile Composite Fibers
    凝胶纺壳聚糖分散碳纳米管/聚丙烯腈纤维的研究
  25. Study on High Molecular Weight Polyacrylonitrile Precursors for Carbon Fibers
    碳纤维用高分子量聚丙烯腈前驱体的研究
  26. Study on high isotactic polyacrylonitrile fiber in preoxidation process
    高强高模碳纤维用高等规聚丙烯腈在预氧化过程中成环性能的研究
  27. For example, polyacrylonitrile fiber impregnated by PTFE emulsion, but also by pre-oxidation after the sintering mold suppression, can be sealed filler molding performance;
    例如用聚丙烯腈纤维经聚四氟乙烯乳液浸渍,又经预氧化后,在模具中烧结压制,可以得到密封性能优异的成型填料;
  28. Polymeric thickener for latex can be prepared from waste polyacrylonitrile ( PAN) via alkaline hydrolysis and chain extension.
    以废腈纶为原料,经碱法水解反应和扩链反应制取乳液用高分子增稠剂。
  29. Non-isothermal Decomposition Kinetics of Novel Fire Retarded Polyacrylonitrile Copolymer in Air
    新型阻燃聚丙烯腈共聚物在空气中的非等温热分解动力学
  30. Study on In-situ Polymerization of Polyacrylonitrile/ Montmorillonite
    原位聚合法制备聚丙烯腈/蒙脱土插层共混材料初探