polymerization

1. These butylraidicals bring about a rapid polymerization of styrene.
   这些丁基自由基促使苯乙烯聚合速度加快。
2. The results of IR and DSC indicated that ITA took part in shell layer's polymerization reaction successfully.
   IR和DSC分析的结果表明，衣康酸（ITA）成功参与了壳层聚合反应。
3. Three styrene-butyl acrylate-acrylic acid random copolymers with different proportions of acrylic acid were synthesized by emulsion polymerization.
   用乳液聚合法合成了三种不同丙烯酸含量的苯乙烯-丙烯酯丁酯-丙烯酸三元共聚物母料。
4. A novel ladderlike polysiloxane with a reactive side group was synthesized via stepwise coupling polymerization.
   通过“逐步偶联聚合方法”设计合成了一种含有反应性侧基的梯形聚有机硅氧烷。
5. Using preemulsion and post polymerization a polymer emulsion was synthesized.
   采用先乳化、后聚合工艺成功合成一种聚合物乳液。
6. A room temperature film formation and low VOC acrylic finishing coatings has been prepared by core-shell structure emulsion polymerization.
   用核-壳乳液聚合方法制备了室温成膜低VOC丙烯酸类上光涂料。
7. A research is made on the production process of the high NV reactive acrylic resin by solution polymerization.
   采用溶液聚合研究了高固含量反应性丙烯酸酯树脂的制造工艺。
8. Influence factors on the molecular weight of acrylic resin during solution polymerization were studied.
   研究了溶液聚合过程影响丙烯酸酯树脂分子量的因素。
9. The effects of polymerization temperature, composition of initiation system, ratio of monomers and reaction time were studied.
   考察了聚合反应温度、发体系、单体配比及反应时间等因素的影响。
10. Effects of polymerization conditions on the copolymer molecular weight and VA weight content were studied.
    考察了聚合条件对共聚物数均分子量和醋酸乙酯（VA）质量分数的影响。
11. In condensation polymerization, each monomer unit must have at least two functional groups.
    在缩聚反应中，每个单体至少要有两个官能团；
12. The majority of vinyl monomers can be used for free radical polymerization catalyst.
    乙烯基类单体大多数可以采用游离基型催化剂进行聚合。
13. The effectiveness of proposed method is validated with simulation on a bulk polymerization reactor of styrene.
    在苯乙烯间歇聚合反应模型上进行了仿真分析，验证了该方法的有效性。
14. In this work, we present a novel method for studying the molecular imprinting process in precipitation polymerization systems.
    在这篇论文中，我们展示了一种新方法来研究沉淀聚合系统中的分子印记过程。
15. Research status of stability of concentrated emulsion polymerization system;
    本文主要介绍了超浓乳液的定义和制备方法。
16. At first, acrylate polymers used for modifying POM was prepared via emulsion polymerization i.
    本文首先采用乳液聚合方法制备了一种用于聚甲醛改性的丙烯酸酯聚合物。
17. Kinetics and nucleation mechanism of acrylate emulsion polymerization modified by vinyl alkoxy silane;
    综述有关丙烯酸酯乳液聚合的机理、研究进展和改性方法。
18. The polymerization characteristics and the suitable mono-functional initiator systems were introduced.
    液聚合：单体，引发剂在适当溶剂中的聚合过程。介绍了聚合特点和单官能团引发剂体系。
19. A thermoplastic resin obtained by polymerization of indene and coumarone; used in coatings and paint and asphalt tile.
    一种热塑性树脂，聚合茚和香豆酮制成，用于涂层、油漆和沥青砖。
20. The polymerization characteristics, catalyst activity and product quality were discussed.
    从聚合反应特性、化剂活性、品质量等方面进行了讨论，并与非球形高效催化剂进行了比较。
21. The influences of degree of polymerization of EO on physical chemistry properties of product were studied.
    测定了产品的表面物理化学性能，系统研究了环氧乙烷（O）合度对产品表面物理化学性能的影响。
22. Kinetics of methyl methacrylate ( MMA) bulk polymerization is investigated in this paper.
    对甲基丙烯酸甲酯（MMA）本体聚合动力学进行了研究。
23. The propylene polymerization in a liquid-phase loop reactor was simulated based on the polymerization mechanism.
    采用机理建模方法对丙烯在环管反应器中的液相聚合过程进行了模型化研究。
24. By using cadmium acetate as catalyst, polyitaconic anhydride was prepared through ring opening polymerization of itaconic anhydride.
    以衣康酸为原料合成了衣康酸酐，并在乙酸镉的催化作用下通过开环聚合得到了聚衣康酸酐。
25. Temperature, pressure, monomer conversion and copolymer composition could be considered states of a polymerization reactor.
    温度，压力，单体转化率和共聚物组成被认为是聚合反应的状态。
26. The reaction condition parameters of bulk and solution polymerization of maleic anhydride were selected by orthogonal experiment.
    探讨了纳米粒子催化马来酸酐本体和溶液聚合，通过正交实验筛选出了最佳反应条件。
27. Abstract: A water dispersed SBS grafted polymer was synthesized by free radical polymerization.
    文摘：采用自由基接枝共聚的方法合成了亲水性SBS接枝丙烯酸共聚物，同时进行了结构表征。
28. Research progress on the cationic polymerization of polyacrylamide is reviewed.
    叙述了阳离子聚丙烯酰胺聚合工艺的研究进展。
29. The use of three-phase interfacial polymerization, polymerization of monomer on the screen to optimize the polymerization conditions.
    采用三相界面聚合法，对聚合单体进行筛选，对聚合条件进行优化。
30. The mechanism of anionic polymerization of isoprene with cyclohexane and dioxane as solvent was studied and improved by experiment.
    推导了异戊二烯在环已烷-二氧六环混合溶剂中的负离子聚合机理，并通过实验进行了验证。

noun

1. a chemical process that combines several monomers to form a polymer or polymeric compound

   Synonym:    polymerisation