polyoxymethylene
英
美
网络 聚氧甲烯; 聚甲醛; 聚氧化甲烯; 聚甲醛树脂; 聚甲醛板
双语例句
- Theoretical Calculations on the Thermodynamics for the Synthesis Reactions of Polyoxymethylene Dimethyl Ethers
合成聚甲醛二甲基醚反应热力学的理论计算 - Enhancement of Toughness and Strength of Polyoxymethylene by Thermoplastic Polyurethane Elastomer and Inorganic Filler; The influence of fineness of fly ash on film-forming of two-component polyurethane waterproof coating was studied.
热塑性聚氨酯弹性体及无机填料增韧增强聚甲醛的研究研究了粉煤灰填充双组分聚氨酯防水涂料的效果。 - Preparation and crystallization behavior of polyoxymethylene/ molybdenum disulfide nanocomposites
聚甲醛/二硫化钼插层复合材料的制备及其结晶行为 - This project mainly makes use of methanol to produce polyoxymethylene ( POM).
本项目主要以甲醇为原料生产聚甲醛。 - Preparation of Ammonium Polyphosphate Based Compound Flame Retardant and Its Flame Retardation on Polyoxymethylene
聚磷酸铵基复合膨胀型阻燃剂的制备及其对聚甲醛的阻燃作用 - Polyoxymethylene fibers were obtained by high-speed melt spinning with laser irradiation heating near the spinneret, meanwhile the thinning behavior was examined by on-line measurement.
聚甲醛纤维是由高速附近的喷丝头的激光照射加热熔融纺丝获得的，同时变薄的行为进行了检查，在线测量。 - Include polyoxymethylene, polyamide, polycarbonate, ABS, polyphenylene oxide, polyethylene terephthalate, polysulfone, polyether sulfone, polyimide, polyphenylene sulfide and so on.
主要包括聚甲醛、聚酰胺、聚碳酸酯、ABS、聚苯醚、聚对苯二甲酸乙二酯、聚砜、聚醚砜、聚酰亚胺、聚苯硫醚等。 - Study on property and structure of glass-fiber-reinforced polyoxymethylene Composites
玻璃纤维增强聚甲醛复合材料性能与结构的研究 - Synthesis, Property and Application of the New Ionomer in the Blend Modification of the Polyoxymethylene
新型离聚体的合成与性质及其在聚甲醛共混改性中的应用 - Study on Sequence Distribution and Thermal Stability of Polyoxymethylene Copolymer
共聚甲醛序列结构与热稳定性能的研究 - Binary blends of polyoxymethylene/ co-polyamide ( POM/ COPA) and ternary blends of poly-oxymethylene/ co-polyamide/ ethylene-vinyl ( POM/ COPA/ EVA) were prepared and the effect of COPA and EVA contents on properties of blends was investigated.
研究了聚甲醛供聚酰胺（POM/COPA）二元及聚甲醛供聚酰胺/乙烯-醋酸乙烯酯共聚物（POM/CA）PA/EVA）三元共混物，探讨了COPA、EVA用量对共混体系性能的影响。 - The antioxidant and the formaldehyde absorbent are the two kinds of the most important thermo-stabilizer for polyoxymethylene ( POM).
抗氧剂和甲醛吸收剂是聚甲醛（POM）稳定体系中最为重要的两种助剂。 - Flame retardant polyoxymethylene ( POM) was developed by means of screening, orthogonal and compounding experiments of the flame retardants, and its molding processing technology was also studied.
通过阻燃剂的筛选实验、正交实验和配方实验研制了阻燃聚甲醛（POM），并研究了阻燃POM的成型加工工艺。 - Fabrication and positive temperature coefficient effect of carbon nanotubes/ polyoxymethylene Composites
碳纳米管／聚甲醛复合材料的制备及其正温度系数效应 - High impact and low wear Polyoxymethylene ( POM) blend was prepared by melt blending of POM with copolyamide ( COPA), silicone grease, oil carrier and surfactant.
将聚甲醛（POM）与适量的三元共聚尼龙（COPA）、硅油、载油体及表面活性剂熔融混合，制备出了性能优良的高抗冲、低磨耗POM共混物。 - In this article, the glass transition temperature of a single polyoxymethylene ( POM) chain adopting the modified bond fluctuation model was studied.
本文利用聚甲醛链的键长涨落模型，研究了聚甲醛单链的玻璃化转变。 - Study on Blends of Polyoxymethylene and Thermoplastic Polyurethane
聚甲醛和热塑性聚氨酯共混改性的研究 - Study on Crystallite Morphology and Mechanical Property of Polyoxymethylene/ Copolyamide Blends
聚甲醛/共聚酰胺共混物的结晶形态及力学性能 - Study on the Polymeric Modification of the Formaldehyde Absorbent for Polyoxymethylene
聚甲醛甲醛吸收剂高分子化研究 - Research on Polyoxymethylene Thermal Decomposition Property
聚甲醛热降解性能研究 - The influence of heat treatment on the crystallization behavior of polyoxymethylene ( POM) was investigated.
考察了热经时处理对聚甲醛（POM）结晶行为的影响。 - Frictional properties of the modified Polyoxymethylene
改性聚甲醛的摩擦性能 - A Orthogonal Experiment Study of Enhancing the Wear-Resistance of Polyoxymethylene Composite
提高聚甲醛复合材料耐磨性的正交试验研究 - Study on Toughening Polyoxymethylene by Blending with Thermoplastic Polyurethane Elastomers
聚甲醛/热塑性聚氨酯弹性体共混增韧的研究 - In this paper the toughening of polyoxymethylene ( POM) by polyamide copolymer was studied by means of mechanical blending, and the morphology, structure and mechanical properties of the blend were measured and analyzed.
本文采用共聚尼龙，用机械共混的方法对聚甲醛进行增韧改性，并对共混物的形态、结构与力学性能进行测试与分析。 - The recent development trend of production and application of general engineering plastics ( including polyamide, polyoxymethylene, thermoplastic polyester, polycarbonate and modified polyphenyl ether) and special engineering plastics polyphenylene sulfide in Japan are introduced.
介绍了最近日本通用工程塑料（包括聚酰胺、聚缩醛、热塑性聚酯、聚碳酸酯及改性聚苯醚）及高级工程塑料聚苯硫醚等的生产和应用开发动向。 - Study on the Thermal Stabilization Effect of Antioxidant F on Polyoxymethylene
抗氧剂F对聚甲醛热稳定作用的研究 - Study of the blend and modification of polyoxymethylene with low density polyethylene
低密度聚乙烯共混改性聚甲醛的研究 - The rheological behavior and mechanical properties of polyoxymethylene ( POM)/ gel acrylonitrile-butadiene elastomer ( GNBE) blends were investigated.
研究了聚甲醛（POM）/凝胶丁腈共聚弹性体（GNBE）共混物的熔体流动指数（MFI）、高压毛细管流变行为和力学性能。 - Study on Nucleation of Polyamide 12 to Polyoxymethylene
PA12对聚甲醛成核作用的研究