prepreg
英
美
网络 膠片; 预浸布; 预浸料坯; 树脂片; 预浸处理
双语例句
- By analyzing the power transfer between the infrared heat source and the prepreg, the paper proposes calculation methods and equations about the transfer coefficients in the infrared heating process.
通过对红外热源与预浸带能量传输过程的分析，提出了红外加热过程中各传递系数的计算方法和公式。 - Research on Placement Techniques of Epoxy Matrix Composite Prepreg
环氧基复合材料预浸料铺覆工艺技术研究 - According to the charactistic of prepreg in tape-laying, effect of the processing pressure on craft process of automatic tape-laying ( ATL) and final product is presented.
结合预浸带在铺叠过程中的特点，分析了铺带成型压力对铺带工艺过程和最终成型构件的影响。 - Using Imported Prepreg as the Raw Material, The Second Overall Compression Molding for External Trough Line and the Tube, Excellent Surface Finishment and Mechanical Performance.
采用进口预浸布作为原材料，槽线与管体二次固化整体成型，表面光洁度和力学性能优异。 - For requirement of placement ability of trajectory, the reason of prepreg distortion is analyzed and the influence of it is also discussed.
基于轨迹的可铺放性要求分析了铺放过程中预浸料产生畸变的原因及影响轨迹可铺放性的因素。 - The prepreg had been used in helicopter secondary structure.
该预浸料已用于直升机次承力结构。 - It would be difficult with complex shape to use prepreg mat or RTM process without having resin-starved or resin-rich area, compromising performance.
以传统的预浸布或树脂转注成型来说，要避免树脂过多，或是树脂缺乏区域，甚至在成品性能上妥协，是一件困难的事。 - The low temperature moulding prepreg technology and it's application are emphasized.
本文简介炭集团公司概况，重点介绍低温成型预浸料技术及其应用。 - In order to satisfy the technological requirements of the automatic tape-laying on freeform surfaces, prepreg tape path is generated.
为满足自动铺带成型工艺要求，在自由曲面上规划预浸带轨迹。 - Research on Molding Suitability of Prepreg Composites for Automated Tape Performance
复合材料预浸料自动铺带成型适宜性研究 - The effects of the sample dimension and the type of fabric on the gel properties of the prepreg were investigated.
在此基础上考察了试样尺寸和纤维织物结构对预浸料凝胶特性的影响。 - The preparation of MODERATE-TEMPERATURE curing epoxy resins used as hot-melt prepreg
热熔预浸料用中温固化环氧树脂体系的制备 - Gelation of thermosetting prepreg by means of solid torsional method The results showed that the mount spacing can be varied to adjust the natural frequency of the rotational mode.
热固性预浸料凝胶特性的固体扭转测试方法结果说明：改变隔振元件的间距能调整扭转振动的固有频率的大小。 - Dynamic mechanical analysis of isothermal curing of epoxy prepreg
用DMA研究环氧预浸料的等温固化过程 - The polypropylene or polyamide prepreg reinforced with 30-60% wt glass or graphite fiber content was prepared.
利用该装置可制备纤维质量比在30%～60%的连续纤维（碳纤维，玻璃纤维）增强热塑性树脂（聚丙烯、尼龙等）基预浸带。 - The cured EN resin has excellent mechanical properties The effect of moisture on the EN system is investigated by DSC TBA and gravimetry And a suitable operating temperature, humidity and storage condition for the prepreg is suggested.
湿气对EN体系的影响用DSC、TBA和重量分析法进行研究。提出了预浸料合适的操作温度、湿度和贮存条件。 - With the increment in the cut length of the prepreg and fiber content, the mechanical property increased.
随着预浸料切割长度的增大、纤维含量的增加，材料的力学性能提高； - In this paper, the technology of carbon fiber reinforced PEEK prepreg produced by melt impregnation is investigated.
初步探索了熔融浸渍法制备碳纤维增强PEEK预浸带的制备工艺。 - Study on the carbon/ epoxy prepreg cured at medium temperature
中温固化碳纤维/环氧预浸料研究 - The prepolymer blending with AE resin can increase dramatically its toughness and tack of prepreg under room temperature.
BDM/DDS/改性剂A预聚体中加入AE树脂，可显著提高基体韧性和预浸料室温粘性。 - Large tow carbon fiber prepreg; Fast curing prepreg.
大丝束碳纤维预浸料和快速固化预浸料。 - In this paper the mechanical properties of moderate temperature material system made by SW-280A/ epoxy resin prepreg, SY-24C adhesive and Nomex honeycomb from the local supplier were studied.
本文详细介绍了由国产SW-280A／环氧树脂预浸料、SY-24C胶膜和Nomex纸蜂窝组成的中温材料体系蜂窝夹层结构的力学性能。 - The glass cloth prepreg and laminates based on this matrix resin were prepared.
考察了共聚树脂及玻璃布预浸料的贮存稳定性和层压板的性能。 - The study progress in epoxy resin and curing system for moderate-temperature hot-melt prepreg is reviewed.
本文综述了中温热熔预浸料用环氧树脂体系，包括国内外基体树脂及固化体系的发展现状； - This paper introduces the principle, test condition and deviation of determination of functional groups in epoxy resins by infrared spectroscopy and the application of epoxy resins and prepreg in quality control.
介绍了用红外光谱法测定环氧树脂的原理、试验条件和允许差，以及该方法在环氧树脂及其预浸料质量控制方面的应用。 - The electromagnetic interference shielding effectiveness of CF/ varnish and CF/ epoxy prepreg are determinated.
测定了碳纤维/清漆混合涂料及碳纤维预浸带对电磁辐射干扰的屏蔽效率。 - Nano attapulgite/ chopped carbon fiber/ BMI composite was prepared by the hot moulding process of prepreg.
采用预浸料模压工艺制备了纳米凹凸棒土/短碳纤维/BMI树脂复合材料。 - Good prepreg with stable processing and according with demands can be fabricated by controlling these factors reasonably.
通过合理控制这些影响因素，可制备出工艺状态稳定、质量符合要求的预浸无纬布。 - White liquor prepreg KP pulp had a better bleachability and can increase alpha-cellulose content easily.
白液预浸KP法浆料可漂性更好，α-纤维素含量容易提高。 - In this study, Glass-aluminum laminates ( GLARE) were prepared and the key factors of the preparation process, including content of primer on the aluminum sheets, fiber volume fraction of the prepreg, drying process and pressing process, were optimized.
本研究对玻璃纤维-铝合金层板（GLARE）的制备关键工艺参数进行了优化，包括铝合金薄板的底胶含量、预浸料的纤维体积含量、烘干条件和层板压制工艺。