recuperator
英
美
网络 回收装置; 换热器; 同流换热器; 能量回收器; 回流换热器
双语例句
- Experimental Investigation on Performance for Annular Primary Surface Recuperator of Micro Gas-turbine
微型燃气轮机圆筒原表面回热器的性能试验研究 - A numerical simulation of flow and heat transfer was conducted for a wavy entire duct of primary surface recuperator ( PSR).
对双面加热环形窄缝通道内单相水处于充分发展流动情况下的对流换热特性进行了数值计算。 - Numerical Simulation and Experimental Study of the Dynamic Characteristics of a Primary Surface Recuperator
一次表面回热器动态特性的数值模拟与实验研究 - Parametric Design of Hydropneumatic Recuperator Based on the Redevelopment
基于二次开发的液体气压式复进机参数化设计 - The flowing and heat transfer in the primary surface recuperator ( PSR) can be influenced by unreasonable inlet structure which results in uneven material flow distribution.
不合理的进气结构造成一次表面回热器（PSR）内部物流分配不均匀，影响回热器内部流体的流动和传热效果。 - Working principle, construction and control of the burner with integrated recuperator ( BICR) provided with radiant tube and developed by Kromschroeder Co.
论述了由德国霍科德公司开发的与辐射管配套使用的自预热燃烧器的工作原理、结构和控制技术。 - Separation of Convective Heat Transfer Coefficient for Cross Wavy Surface Recuperator Based on Genetic Algorithm Hydrodynamics and thermal characteristics of chevron-type plate heat exchangers
基于遗传算法的交错波纹板换热器表面传热系数的分离人字形波纹板式换热器性能数值模拟的研究 - Performance of Heat Transfer and Drag Characteristics for Recuperator with Corrugated-Undulated Primary Surfaces
复式波纹板型一次表面回热器传热及阻力特性的研究 - Experimental investigation of flow and heat transfer in a primary surface recuperator
重力热管流动与传热特性的数值模拟原表面回热器换热阻力特性试验研究 - Numerical Simulation of Two-Phase Flow in Inclined Settlers and Their Separation Performance; Separation of Convective Heat Transfer Coefficient for Cross Wavy Surface Recuperator Based on Genetic Algorithm
斜板沉降器固液两相流数值模拟及分离性能研究基于遗传算法的交错波纹板换热器表面传热系数的分离 - By several low Reynolds numbers, the heat transfer and flow characteristics are compared for different structural scales and surface arrangements, and the recuperator is optimized and designed.
针对低雷诺数范围流动，通过比较不同结构尺度和换热面布置时传热和流动特性，对换热表面进行了设计优选。 - The calculation model for tubular radiation recuperator has been established and the thermal transmission characteristics ( preheating temperature of air, temperature of furnace wall and thermal transmission coefficient) of the radiation recuperator for car-type heat treating furnace has been therefore analyzed.
建立了筒状辐射换热器传热计算模型，分析了台车式热处理炉上使用燃气辐射换热器的传热特性（空气预热温度、壁温和传热系数）。 - Dynamic Behavior of a Inter-Cooled Gas Turbine Set with Waste Heat Recuperator
带中间冷却和回热的燃气轮机动态性能的研究 - A numerical simulation of flow and heat transfer was conducted for a wavy entire duct of primary surface recuperator ( PSR). The results of three-dimensional numerical predictions were obtained based on the laminar flow assumptions and compared with the literature data by empirical calculations.
基于层流假设，对微型燃机一次表面回热器（PSR）波纹状全程通道的换热特性和压力损失进行了三维数值模拟计算，并将模拟结果与经验公式计算结果进行了比较。 - The result can be referenced for the design of the CW primary surface recuperator.
模拟结果为CW原表面回热器的进一步优化设计提供了参考依据。 - An Analysis of the Influence of a Recuperator on a Humid Air Turbine ( HAT) Cycle
回热器对HAT循环影响的分析 - On thermal performances of micro-turbine with a recuperator and its CHP system
回热型微型燃气轮机热力性能及CHP系统研究 - The application characteristics of plate-fin recuperator for HTGR
板翅式回热器在高温气冷堆中的应用特性 - Investigations on heat transfer performance of a plate-fin recuperator
板翅式回热器传热性能研究 - Recoil mechanism of simulated firing device consists of structural forms of double recoil brakes and single recuperator.
某模拟发射装置的反后坐装置采用双驻退机和单复进机的结构形式。 - The status quo of the recuperator development for the energy island is summarized, and types of heat transfer surfaces, materials and manufacturing technologies are discussed in this paper.
为此，综述了能源岛中回热技术的发展现状，对回热器材料、换热型面、回热器的制造情况进行了研究。 - Research on Flow and Heat Transfer Characteristics of Primary Surface Recuperator
一次表面回热器的流动和传热研究 - The recuperator is one of the main components of the micro turbine in energy island system.
回热器是能源岛系统中微型燃气轮机的一个主要部件。 - The technical processing of designing and producing the cast iron recuperator for hot blast cupola is available.
根据熔化原理，提供设计制造铸铁热风炉胆的工艺过程和利用导程刮板的造型方法。 - The advance of material in metal convection recuperator, new technology of control pattern in recuperator system and the problems on air heating temperature considered in design are discussed in this paper.
本文对金属对流换热器材质的进步，换热器系统控制方式中的新技术，以及设计中确定空气预热温度时应考虑的问题等进行了论述。 - The application of equal mass flow method in high temperature recuperator test system is discussed.
研究等流量法在高温回热器试验台上的应用。 - This paper represents a numerical method to simulate the complex heat transfer in a radiant metal recuperator.
应用蒙特卡洛法仿真辐射式金属换热器内的辐射传热过程，建立了换热器综合传热的数学模型。 - Study on the Recuperator Design Used in the Direct Helium-turbine Power Conversion Cycle of HTR-10
HTR-10氦气透平直接循环回热器的设计研究 - Intensifying heat transfer of high temperature flue gas/ air recuperator by metal radiation mesh is presented, and effects of the said mesh on heat transfer are tested and analysed.
提出了用金属辐射网来强化高温烟气/空气换热器传热的方法，并通过实验研究了金属辐射网对其传热特性的影响。 - The effect of turbine efficiency on the system efficiency is more obvious than the effect of compressor and recuperator efficiencies among the gas turbine components.
燃气轮机部件中透平性能好坏对混合系统的效率影响最大，其次为压气机和回热器。