roughening

英 [ˈrʌfnɪŋ] 美 [ˈrʌfnɪŋ]

v.  变粗糙; 使粗糙
roughen的现在分词

柯林斯词典

  1. VERB （使）变得粗糙;（使）变得不平滑
    If something has been roughened, its surface has become less smooth.
    1. ...complexions that have been roughened by long periods in the hot sun...
      因长期曝晒而变得粗糙的皮肤
    2. She lifted her big, roughened hands.
      她举起了那双粗糙的大手。
点击展开全文

双语例句

  1. Mechanically roughening the surface of a metal sheet by means of abrasive powders, sand bursting, etc, for use as an offset plate.
    用机械方法把书页结合一起的方法。通常是用金属线或胶圈。
  2. With fully hardened metal spikes, replaceable, for removal of paint and synthetic sealant, adhered underlay, cork tiling and adhesive residue, for roughening industrial floors.
    硬质合金尖刀，清除油漆，秘封剂，胶粘的地胶，软木层，胶水，毛毡，打磨工业地坪。
  3. If maximum recoat is exceed, roughening of the surface is necessary to ensure intercoat adhesion.
    如超过最大重涂间隔，应磨粗表面，以保证附着力。
  4. Fibrillation: In paper making, the process of roughening the outside of the fibre to increase bonding capabilities.
    纤丝化：在造纸过程中，把纤维的外表摩擦起毛，以增加连接能力。
  5. Mechanical graining: Mechanically roughening the surface of a metal sheet by means of abrasive powders, sand bursting, etc, for use as an offset plate. See Graining.
    机械磨版：用磨擦粉剂，喷沙等机械方法把金属片的表面造成粗糙，适合为柯式印刷。参阅磨版。
  6. Compared with the prior art, the roughening device can remarkably improve the reliability and prolong the service life of the bonded rebar.
    与现有技术相比，能显著提高化学植筋的可靠性和寿命。
  7. The influence of surface roughening on GaN based vertical-electrodes LEDs
    表面粗化对GaN基垂直结构LED出光效率的影响
  8. Roughening of HYP-containing coating base paper
    含高得率浆涂布纸的粗化及其影响因素
  9. Tilting hi-speed sole welt grinding& roughening machine
    旋转式高速鞋底边墙磨粗机
  10. In this paper wave decay characteristics and wave run-up on armored layers with stripstones of roughening sloping dikes are studies.
    试验研究了加糙斜坡堤插砌条石护面的消浪特性及波浪爬高。
  11. Chemical roughening method was applied to treat plastic surface, roughness and contact angle of plastic surface were determined before and after it was treated.
    采用化学糙化法对塑料表面进行处理，测定了处理前后表面的粗糙度及接触角。
  12. Development of Sulfuric Acid/ Hydrogen Peroxide System Roughening Reagent BTH-2066 and Application to Manufacture Fine-Line Circuit Pattern
    硫酸双氧水型超粗化剂BTH-2066的开发及在精细线路图形制作中的应用
  13. Optical Profiler's Application in the Determination of the Base Paper Roughening SMOOTHING AND FITTING THE MEASURED DATA OF PLANE CAM PROFILE
    光学轮廓仪在纸张粗化程度测定中的应用平面凸轮廓线实测数据的光顺及拟合
  14. Traditional copper surface roughening treatment involve the use of arsenide-containing electrolyte which is harmful to environment.
    对铜箔表面进行粗化处理，传统的粗化工艺中要使用砷化物，不仅操作不便而且危害环境。
  15. A flume experimental study is conducted for the hydraulic resistance of roughening elements shaped as letter "Y".
    通过水槽试验对Y型加糙体阻力特性进行了深入研究。
  16. In situ surface Raman spectroscopy has been extended to study silicon electrode surfaces by optimizing the Raman system and the surface roughening method.
    通过对拉曼谱仪和电极粗糙方法的优化，本文将表面拉曼光谱技术拓宽到了半导体硅电极表面的现场研究。
  17. Surface self-diffusion and thermal roughening study on tungsten single crystal planes by field emission fluctuation method
    用场发射涨落法研究钨表面原子在单晶面上自扩散和热粗糙化过程
  18. Study on Reduced Thickness and Roughening Surface of Punched Hole Steel Strip
    穿孔钢带减薄和表面粗化处理的研究
  19. Study of the Influence on Fatigue Strength of Thermal Spraying Crankshaft Roughening by Wet Blasting and Arc
    液体喷砂和电拉毛粗化处理对热喷涂曲轴疲劳强度影响的研究
  20. No surface ablation or roughening was observed after plasma treatment.
    等离子体处理后，纤维的表面没有明显的刻蚀或粗糙现象。
  21. Surface self-diffusion and the thermal roughening of W atoms on the stepped W surface at higher temperatures.
    在较高温度时钨台阶表面上钨原子的表面自扩散和热租糙化过程的研究等。
  22. A new method ( screen-printing) of roughening anode/ electrolyte interface is presented.
    提出了一种新的粗化阳极/电解质界面的方法&丝网印刷法。
  23. Surface roughening is very important in arc spraying, as the coating quality depends greatly on its treatment result.
    表面粗化在电弧喷涂中具有重要作用，涂层质量很大程度上取决于表面粗化预处理的效果。
  24. Influence of Roughening Treatment of Plastic Surface on Its Wettability
    塑料表面糙化处理对其润湿性能的影响
  25. The roughening process of unsaturated polyester resins and its technological criterion were described.
    介绍了不饱和聚酯树脂的粗化工艺流程及各工艺规范。
  26. The optimal roughening solution was obtained, and the effects of sodium hydroxide concentration, roughing time and temperature on the etching of textile fiber were further studied.
    得出了较好的粗化液，并研究了该粗化液中氢氧化钠的质量浓度、粗化温度、粗化时间对织物纤维浸蚀效果的影响。
  27. Study on Copper Foil Surface Roughening Technology
    铜箔表面粗化工艺的研究
  28. Aiming at the quality of metallization on organic terylene fabric textile which is used for microwave protection and electromagnetic wave shielding, the roughening effects of sodium hydroxide, phenol and polyethylene glycol 600 on terylene fiber were studied.
    针对微波防护和电磁屏蔽用涤纶织物金属化的附着强度问题，研究了氢氧化钠、苯酚、聚乙二醇-6003种粗化液对涤纶纤维的粗化效果。
  29. The influences of the kind, the volume fraction and the relative hardness of the second phase and of plastic strain ε in steel as well as of initial surface roughness R_0 on the surface roughening behaviour in free forming are investigated.
    研究了塑性变形量ε、钢中第二相的种类、数量和相对硬度比及初始表面粗糙度R0对自由成型表面粗糙化行为的影响。
  30. Changes of wetting performance can be used to check the degree of roughening.
    利用润湿性的变化可以考察其粗化处理程度。
点击展开全文

考试分类

行业分类

柯林斯词典词频分级词汇

其他分类