self-propagation
英
美
网络 自传; 自增长; 自体繁殖
双语例句
- Effect of NaF on self-propagation high-temperature synthesis combustion of Al-Fe_2O_3 system
NaF对Al-Fe2O3体系自蔓延高温合成燃烧过程的影响 - Influencing factors on synthesis of Al/ Mg_2Si with both the combustion modes of thermal explosion and self-propagation
热爆和自蔓延2种模式下合成Al/Mg2Si的影响因素 - Reaction mechanism for the synthesis of Ti_3AlC_2 by mechanically induced self-propagation reaction
机械诱发自蔓延反应合成Ti3AlC2的机理研究 - The microstructural difference of the Ti-Al_2O_3 cermet prepared by self-propagation high temperature synthesis ( SHS) and thermal explosion have been examined.
通过试验观察了Al-TiO2自蔓延高温合成（SHS）和热爆合成Ti-Al2O3金属陶瓷复合材料宏观结构差异，并结合冶金学原理对此作了分析。 - Effect of diluent content on si_3n_4-sic-tin ceramics prepared by self-propagation high-temperature synthesis
稀释剂含量对自蔓延高温合成Si3N4-SiC-TiN陶瓷的影响 - The Al2O3/ Fe compound pipes were prepared by gravitational separation self-propagation high-temperature synthesis method.
采用重力分离-自蔓延高温合成法制备了Al2O3/Fe陶瓷内衬复合管。 - TiC reinforced titanium matrix composites were produced by non-consumable arc-melting technology utilizing the self-propagation high-temperature synthesis ( SHS) reaction between titanium and graphite.
利用钛与石墨之间的自蔓燃高温合成反应经普通的钛合金铸造工艺制备了TiC增强的钛基复合材料。 - Nickel plays an important role to the thermodynamics and reaction dynamics in self-propagation high temperature synthesis reactions, but little is currently available on the action of nickel in high velocity oxy fuel flame spraying ( HVOF).
Ni对Ti-Ni-C体系SHS反应中的热力学与动力学均有重要影响，Ni在超音速火焰喷涂合成中的作用尚不明确。 - The Structural Macrokinetics of The Al& TiO_2 Self-Propagation High Temperature Syntheses
Al-TiO2自蔓延高温合成结构宏观动力学分析 - Study on self-propagation high temperature synthesis of silicon nitride
自蔓延高温合成氮化硅的研究 - In the process of materials preparation by self-propagation high temperature synthesis ( SHS), the structural formation and structural macrokinetics are of great importance.
在材料的自蔓延高温合成（SHS）过程中，反应物与产物之间，各种结构层次（宏观、微观、晶体结构等）上的转变过程&结构宏观动力学，对材料制备具有决定意义。 - In the condition of no electricity and no gas the self-propagation welding depends on chemistry response which creates huge quantity of heat to release the liquid state iron which can be mixed with the alloy elements to form the alloy, and can be used in rush to repair.
在无电无气的状态下，自蔓延焊接依靠自身化学还原反应生成铁水，通过加入合金元素形成多种合金，可应用于装甲装备的战场战伤应急焊接抢修。 - The Finite Element Simulation of the Welding Temperature Field and the Remain Stress Field of Self-Propagation Welding
自蔓延焊接温度场及残余应力场有限元分析 - The Macrokinetics Differences of the Al-TiO_2 Cermet Prepared by Self-Propagation High Temperature Synthesis and Thermal Explosion
Al-TiO2自蔓延高温合成和热爆合成金属陶瓷宏观动力学差异 - A review is given in the present paper of the production of coated powders of tungsten silicide by the P/ M route using the self-propagation and high temperature synthesis techniques.
用粉末冶金方法制造难熔金属钨硅化物，研究自传播高温合成技术制取钨硅的包复粉末，讨论了它的制造工艺参数及其理化性能的测定。 - Self-Propagation High Temperature Synthesis of TiB_2 and TiB_2-Al_2O_3 Composite in Air Atmosphere
环境气氛自蔓延高温还原合成TiB2陶瓷及TiB2-Al2O3复相陶瓷材料的制备 - Effects of Combustion Conditions on the Characteristics of Al_2O_3/ AlB_ ( 12) Composite Powders Produced by Self-Propagation High-Temperature Synthesis
燃烧条件对自蔓延高温合成Al2O3/AlB（12）复相陶瓷粉体特性的影响 - FGM has been fabricated by vapor deposition, powder metallurgy, plasma spraying, self-propagation high temperature synthesis, electro deposition, etc.
目前FGM的制备方法主要有气相沉积法、粉末冶金法、等离子喷涂法、自蔓延合成、电沉积法、激光熔覆法、离心铸造法、沉淀生成法和熔渗法等。 - After probing into the dynamic mechanism of speedy insurance business growth of our country through VAR and ECM, we come to the conclusion that economic growth, together with the self-organization and self-propagation of insurance industry, is the main power source of insurance development.
利用向量自回归模型（VAR）和误差修正模型（ECM）对我国保险业增长的动力机制进行探讨，得知经济增长和保险产业的自组织和自增长是保险业发展最主要的动力源。 - Self-propagation of worms can provide attackers plenty of available host nodes, and therefore construction of worm networks will naturally follow after propagation of worms.
蠕虫的自主传播能够为攻击者提供大量可以利用的主机节点，因此组建蠕虫网络就成了蠕虫传播的自然延续。 - In order to explore a low cost technique which can fabricate complex shape parts efficiently, Low-Pressure Injection Molding ( LPIM) combined with Self-propagation High temperature Synthesis synchronous densification by Hot Isostatic Pressing ( SHS-HIP) technique are employed to fabricate slender tubes with blind hole.
采用低压注射成形制备盲孔细长管毛坯，结合自蔓延高温合成热等静压（SHS-HIP）烧结技术，探索快速、高效合成复杂形状零件的低成本制备工艺。