servo

noun

1. （机器的）伺服传动装置，伺服系统
   a part of a machine that controls a larger piece of machinery

1. The results show that the dynamic performance of servo system is enhanced greatly.
   仿真结果表明，伺服系统的动态性能有了很大的提高。
2. A controller of linear servo system is designed by means of this method.
   用该方法设计了直线伺服系统控制器。
3. The driven system adopts full imported digital AC servo system.
   驱动系统采用全进口数字式交流伺服系统；
4. This paper researched the servo controller for mobile robot based on personal computer and LM629.
   研究和设计了一种利用PC机和专用运动控制芯片LM629的移动机器人伺服控制器。
5. A dynamical-integral sliding mode control approach was proposed for the speed controlling of AC servo system.
   针对交流伺服系统速度控制问题，提出了一种动态积分滑模控制方法。
6. Dynamic inverse model Adaptive control Robust control Electro-hydraulic positioning servo system;
   动态逆模型；自适应控制；鲁棒控制；电液位置伺服系统；
7. Servo motor control system Imported from Japan Panasonic, provide accurate displacement and speed control.
   进口松下电机伺服控制系统，提供精确位移及速度控制。
8. Research on Intelligent Control and Simulation Technology of the Electro-hydraulic Position Servo System;
   提出了一种适用于电液位置伺服系统这类宽频带系统的新的自适应控制方法。
9. Servo control in optoelectronic tracking system is one of the key technologies to realize the high precision tracking.
   光电跟踪系统中的伺服控制技术是实现高精度跟踪的关键技术之一。
10. We provide multiaxial servo controlled system robot.
    提供多轴伺服控制的机械手和机器人。
11. A position estimation scheme in visual servo system with single camera mounted on a robot is proposed.
    提出了单摄像机安装在机器人上的视觉伺服系统的位置估计方法。
12. The simulation method of Three Dimensional Motor servo system are presented.
    给出了三维电动机伺服系统一种整体仿真的方法。
13. A position servo controller based on sliding mode control for permanent magnet linear synchronous motors was proposed.
    提出了一种基于滑模控制的永磁同步直线电动机位置伺服控制器。
14. The large influence of load disturbances and parameter changes on PMLSM servo system was resolved by robust control strategy.
    为了解决永磁直线电动机伺服系统中负载扰动及参数变化对系统性能影响较大的问题，采用了鲁棒控制方法。
15. A simple and practical gain tuning method for AC servo system speed controller was presented.
    介绍了一种简便可行的交流伺服系统速度控制器参数整定方法。
16. According to valve's control mode, it is divided into servo actuator and switch actuator.
    根据阀门的控制方式，可分为伺服型执行机构和开关型执行机构。
17. Introduced are basic principle and characters of servo rebalance control loop in a dynamically tuned gyro inclinometer system.
    介绍了动调式陀螺测斜系统伺服控制再平衡回路的基本原理和工作特点。
18. Finally the single-chip flywheel torque servo controller was implemented on a system level ASIC.
    给出了实现飞轮力矩伺服控制算法的系统级ASIC结构。
19. A method of the electro hydraulic servo system identification modeling is presented based on support vector machines.
    提出了电液伺服系统的支持向量机的辨识建模方法。
20. Electromechanical coupling effect is considered in the dynamic analysis on permanent magnet AC servo precision derive system.
    对永磁交流伺服精密驱动系统进行动力学分析时，必须考虑系统的机电耦合影响。
21. Fuzzy logic and neural network controller and their applications in an electro hydraulic servo position system are discussed.
    讨论了模糊逻辑和神经网络控制器在电液伺服位置系统中的应用。
22. Based on the analysis of EHA and the nonlinear friction, the models of EHA servo system were established.
    在对EHA伺服系统以及非线性摩擦特性进行分析的基础上，建立了EHA伺服系统各部分模型。
23. To improve the servo system's tracking response and anti-disturbance performance, the original speed controller is ameliorated.
    为进一步提高伺服系统的跟踪响应与抗扰能力，对原速度控制器提出了改进方案。
24. The AC position servo systems are extensively used in the industrial control systems.
    交流位置伺服系统广泛应用于工业控制系统中。
25. The Robot can be interacted with other moving servo motors such as part rotation or automatic part loading.
    机器人可以与其他的运动伺服电机联合运动。如零件的旋转和自动零件加载。
26. The positioning and accuracy are controlled by encoders from servo motors.
    准确的定位和控制由伺服电机编码器。
27. The driving system use DC servo system of modulating pulse width.
    驱动系统采用脉宽调制直流伺服系统。
28. Fuzzy control strategy is introduced into a field-oriented controlled induction motor servo system in this paper.
    将模糊控制技术引入到了感应电动机矢量控制位置伺服系统中，设计了模糊位置和电流控制器。
29. The disturbance-compensation of inverted pendulum servo system that was composed of AC-PMSM was studied.
    研究了基于交流永磁同步电动机的倒立摆伺服系统的干扰补偿控制问题。
30. In this paper a design method for positioning servo controller using prediction control scheme is proposed.
    结合预测控制的思想，提出了一种位置伺服控制器的设计方法。

noun

1. control system that converts a small mechanical motion into one requiring much greater power

   Synonym:    servomechanismservosystem

adj

1. of or involving servomechanisms

   Synonym:    servomechanical