short-circuiting

英 [ˌʃɔːt ˈsɜːkɪtɪŋ] 美 [ˌʃɔːrt ˈsɜːrkɪtɪŋ]

v.  (使)短路; (做事)抄近路,走捷径
short-circuit的现在分词



柯林斯词典

  1. V-ERG (使)短路
    If an electrical device short-circuits or if someone or something short-circuits it, a wrong connection or damaged wire causes electricity to travel along the wrong route and damage the device.
    1. Carbon dust and oil build up in large motors and cause them to short-circuit...
      碳尘和燃油在大发动机里越积越多,造成了发动机短路。
    2. Once inside they short-circuited the electronic security.
      一旦置入,它们就会使电子安全设施短路。
    3. Short-circuit is also a noun.
    4. The fire was started by an electrical short-circuit.
      火灾是由电线短路引发的。
  2. VERB 回避,绕过(某一流程或程序)
    If someone or something short-circuits a process or system, they avoid long or difficult parts of it and use a quicker, more direct method to achieve their aim.
    1. The approach was intended to short-circuit normal complaints procedures.
      这种方法旨在避开正常的投诉程序。

双语例句

  1. You might recognize blow a fuse as a term describing short-circuiting of some kind, because of the word fuse
    你可能会觉得是一个描述电路短路的词,因为fuse
  2. Some pharmaceutical companies are experimenting with other types of additives with the aim of short-circuiting bacteria's defenses.
    一些制药公司也在试验其它类型的添加剂,旨在破坏细菌的防御体系。
  3. The rule of the arc-time and short-circuiting transfer cycle time under the high speed welding was researched by welding quality analyzer of Hannover.
    采用汉诺威焊接质量分析仪,研究了在高速焊接的情况下,燃弧时间与短路过渡周期的变化规律。
  4. Otherwise, accidental short-circuiting can lead to electric shock and to serious damage.
    否则,意外的短路可能引起触电和严重的损坏。
  5. The Finnish phone maker has received around 100 reports of its phones short-circuiting while being charged.
    芬兰手机制造商已经收到大约100份由于手机短路而被起诉的报告。
  6. He found that, by charging a capacitor to various voltages and discharging it by short-circuiting it with the fuse, he could create a controlled amount of surge current.
    他发现通过电容充电到各种电压,用保险丝短路放电,可以形成一个可控的浪涌电流。
  7. If your program logic depends on any of that additional code, you should probably avoid short-circuiting operators.
    如果程序逻辑依赖于任何这些附加代码,您可能应该避免使用短路运算符。
  8. The Employer reserves the right to perform additional inspection of production welds made using GMAW in the short-circuiting transfer mode.
    业主保留对使用短路过渡模式下的gmaw的生产焊缝进行附加检验的权利。
  9. Based on the research of reason of splatter generating in the process of short-circuiting transfer, it tries to control the splatter of CO2 welding by longitudinal magnetic field.
    在研究短路过渡飞溅产生原因的基础上,初步尝试了用纵向磁场来控制CO2气体保护焊飞溅。
  10. Short-circuiting Effect and the Solution in Gnutella Network
    Gnutella网络中的短路效应及其解决方案
  11. The effects of the short-circuiting transfer parameters on weld formation quality in high speed CO2 welding process were analyzed.
    分析了高速CO2焊接过程中短路过渡参数对焊缝成形质量的影响。
  12. Influence of dynamic electromagnetic force on stability of short-circuiting transfer in GMAW
    电磁力动态变化对短路过渡稳定性的影响
  13. Multivariate statistical process control for on line monitoring of short-circuiting GMAW
    短路GMAW焊在线质量监测的多变量统计过程控制方法
  14. Metal transfer frequency are usually taken as the criteria to evaluate the process stability of short-circuiting arc welding.
    短路过渡焊接时,熔滴过渡频率通常被作为评价焊接过程稳定性及焊接质量的重要指标。
  15. The electrical field radiated by the unit current in a rectangular waveguide with a short-circuiting plunger is derived by making use of the auxiliary potential function.
    应用辅助势函数,推导了一端具有短路板的矩形直波导中单位电流源的辐射场。
  16. The CO2 welding process needs the special external characteristic and dynamic characteristic of power source for there are alternately arcing time and short circuiting time at the period of short-circuiting CO2 welding.
    在采用短路过渡方式的CO2焊过程中,短路和燃弧过程交替发生,因此它对电源的外特性和动特性有特殊的要求。
  17. According to the analysis we can get the result of the welding quality from the current and voltage of the CO_2 gas shield droplet short-circuiting transfer.
    在此基础上,采用本系统对熔滴短路过渡CO2气体保护焊的焊接电流和电压波形进行了实时采集、存储。
  18. Adaptive control system with constant frequency of droplet transfer for waveform controlled short-circuiting co_2 arc welding
    波控短路过渡CO2焊接恒频自适应控制系统
  19. A arc parameter-measuring system was developed to analyze the process of short-circuiting arc welding and the effect of arc energy on the welding stability.
    为了分析短路过渡电弧的焊接过程和探讨电弧能量对焊接稳定性的影响,设计了短路过渡电弧电参数检测系统。
  20. In order to take into account the synthetic influence of all characteristic parameters, by means of the characteristic parameters synthetic value, a quantitative evaluation function is built up to describe and real time evaluate the short-circuiting transfer process of CO2 arc welding.
    为综合考虑这些参数的影响,以特征参数综合值来描述和实时评判CO2焊接短路过渡过程,得到一个能全面定量描述和评判CO2焊接过程的综合评价函数。
  21. The weld quality under different welding conditions is related to the welding parameters which are inherent electrical parameters in the welding process itself, i.e. welding current, welding voltage, arc sound, short-circuiting frequency and so on.
    不同工艺条件下的焊接质量的好坏,肯定会反映在与焊接过程本身固有的焊接工艺参数上,如焊接电流、焊接电压、电弧声压、熔滴过渡频率等等。
  22. Analysis of synchronous multi-information and experimental research of short-circuiting transfer process in CO 2 arc welding
    CO2焊短路过渡过程的同步多信息分析及试验
  23. The direct current reactor is used in order to obtain favorable dynamic property and attain the request of short-circuiting transfer to welding power supply, which makes the welding machine obtain excellent welding performance.
    为获得良好的动特性,达到短路过渡对焊接电源的要求,加入了直流电抗器,从而使焊机具有良好的动特性,获得优良的焊接工艺性能。
  24. The short-circuiting transfer is a main form of CO2 arc welding droplet transfer. The arc welding short-circuiting transfer process and the current waveform control process of a developed new type waveform controller a simulated.
    对CO2弧焊短路过渡过程,以及研制的一种新型波控器的电流波形控制过程进行了计算机模拟仿真,仿真结果与实验吻合。
  25. Parallel-style Waveform Control on Welding Arc in Droplet Short-circuiting Transfer Process of CO_2 Arc Welding
    CO2弧焊熔滴过渡过程焊接电弧的并联式波形控制
  26. Computer simulation on arc welding short-circuiting transfer process and current waveform control
    弧焊短路过渡过程及其电流波形控制的计算机仿真
  27. Randomicity& stability of short-circuiting droplet transfer in arc welding process
    弧焊短路过渡过程的随机性与稳定性
  28. Based on the approximate entropy theory and related algorithm, approximate entropy analysis of current in short-circuiting arc welding in CO_2 shielding gas are performed from the point of view of nonlinear time sequences.
    依据近似熵的理论和算法,从非线性角度对纯CO2保护气体条件下短路过渡电弧焊的电流信号进行了近似熵分析。
  29. Detection and Analysis on the arc energy of short-circuiting co_2 arc welding
    短路过渡CO2焊电弧能量的检测与分析
  30. The control of CO 2 arc welding short-circuiting transfer with magnetic field is studied.
    研究了外加磁场对CO2焊短路过渡的控制。